GE / IP FANUC Series 90/30 In Stock
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Browse our selection of 592 Overload Relays units
AutomationStop.com's online catalog offers one of the largest selections of preowned 592 Overload Relays units in the world.
592-A2NF
The 592-A2NF solid-state overload relay module from Allen-Bradley is a Bulletin 592 relay module that can protect an induction motor from overload errors. Its reset option is a manual reset option. The 592-A2NF relay also supports a phase loss protection option. The current range for this relay module is from 96 to 300 Amperes. The 592-A2NF relay weighs about 10.5 pounds. This relay module's isolation voltage rating is 600 Volts.
592-EC1BC
The 592-EC1BC overload relay from Allen-Bradley is an E3 and Bulletin 592 solid-state relay device. It supports automatic resetting and manual resetting and the users can select whichever reset option they prefer in the field. The users can also select 3-phase or 1-phase operation for the 592-EC1BC relay (3-phase is the default setting.) Its adjustable trip class range is 5 to 30, and its current range is 3 to 15 Amps.
592-EC2AC
Catalog number 592-EC2AC, which was manufactured by Allen Bradley/Rockwell Automation, is an E3 Plus-series solid-state overload relay. This device has a current rating that ranges from 1 ampere to 5 amperes. The contactor size of this overload relay ranges from 0 to 2. The 592-EC2AC has 2 output channels and 4 input channels.
592-EC2CC
Part Number 592-EC2CC is an electronic overload relay from Allen Bradley/ Rockwell Automation. It is part of the E3 Plus family of protective electrical devices. It features a built-in ground fault sensor and a current trip adjustment rating of 5-25 Amps, with a NEMA voltage level of 600V and an IEC operating voltage of 690/1000V. The device's integrated microprocessor-based overload sensing technology allows overcurrent, stall, underload, and current imbalance detection.
592-EC2DC
Product number 592-EC2ED is an E3 Plus solid-state overload relay. This product was designed and manufactured by Allen Bradley/Rockwell Automation. This device has a current rating that ranges from 18 amperes to 90 amperes. The 592-EC2ED has a size 3 contactor. This overload relay has 4 input channels, in addition to 2 output channels. The operating voltage of the 592-EC2ED solid-state overload relay is 250 volts AC.
592-EC2PC
The Allen Bradley 592 series offers the 592-EC2PC solid-state overload relay. It is designed to protect squirrel cage induction rotors and is commonly used with contactors ranging from 0.4 to 2 Amperes, with sizes 0 to 2 being the most typical. The 592-EC2PC module can be switched from three-phase to single-phase operation by modifying parameter 27, which is set to default. The front panel features LED status indicators, a reset button, node address switches, a voltage input module connection, ground fault sensor input, and input terminals.
592-EC3BC
The 592-EC3BC solid-state relay is an overload relay module that is available in the Allen-Bradley E3 Plus product line. It supports contactor sizes between 0 and 2. The 592-EC3BC relay can trip to protect itself and connected devices from phase losses and from stalling. Its current rating is between 3 and 15 Amperes. The 592-EC3BC relay can support an optional external ground fault sensor which allows it to provide a system with ground fault protection.
592-EC3HF
The 592-EC3HF overload relay module is an Allen-Bradley Bulletin 592 and E3 Plus series overload relay module. This relay module can operate with 60 to 302 Amps of rated current. The 592-EC3HF relay can operate with 3-phase or 1-phase input, and it operates with 3-phase input by default. It supports several warning or protective functions that include a ground fault function, an underload function, an overload function, a jam function, and a current imbalance function, and these functions protect the relay and connected equipment from damage and malfunctioning.
592-EECC
The Allen-Bradley Bulletin 592 series 592-EECC relay is an E1 Plus type of industrial overload relay module. It supports 1 to 5 Amperes of current when it operates. The 592-EECC relay is also a NEMA type of overload relay and it was designed for mounting on NEMA Bulletin 500 contactors with sizes from 0 to 2. It has screw-type terminals and its selectable reset options are manual resetting or auto-manual resetting.
592-EEDC
The 592-EEDC by Allen-Bradley is an electronic overload relay that belongs to the 592 series and the E1 Overload Relay family of products. It offers the flexibility to select between auto-manual and manual reset options, as well as trip classes 10, 20, 15, or 30 (NEMA). The 592-EEDC Relay features both NO and NC contacts that allow for full load currents ranging from 3.2 to 16 Amps. It can be connected to any size 0-2 NEMA contactor and operates with Bulletin 500 contactors.
592-EEHE
The Allen-Bradley 592-EEHE overload relay is an E1 Plus series overload relay that supports a size 4 starter. It also supports 3-phase operation and 30 to 150 Amps of adjustment current. The 592-EEHE relay has selectable reset options which are an auto/manual option and a completely manual option. This relay's trip class rating is also selectable and it can support trip class ratings of 10, 15, 20, or 30.
592-C1DT
The 592-C is an SMP-3 relay module from Allen Bradley/ Rockwell Automation's 592 Overload Relays series. All Allen-Bradley NEMA size 00 starters are compatible with its load current adjustment range of 0.7 to 2.5 Amps. The 592-C1DT is a solid-state relay module that may be set to trip at Class 10, 15, 20, or 30 in the field, depending on the severity of an electrical failure. When the relay module trips, it may be manually or automatically reset.
592-C1FA
The 592-C1FA Motor Starter Overload Relay from Allen-Bradley/Rockwell Automation is a compact, solid-state relay designed for use in NEMA size 0 and 1 motor starters. With a rated current range of 2 to 10 Amps and a voltage rating of 120-240V AC, this relay offers both automatic and manual reset options. Its advanced features include jam protection and ground fault tripping. The 592-C1FA Motor Starter Overload Relay is a reliable and efficient solution for protecting motors from overloads.
592-C1HA
The Allen Bradley/ Rockwell Automation 592-C1HA relay is a reliable solid-state multi-pole (SMP) overload relay that offers versatile trip class options that can be easily modified in the field with both automatic and manual reset options. With a current range of 7 - 37 Amps, this relay is suitable for size 0 and 1 starters and offers advanced protection features such as phase loss protection, jam protection, and ground fault protection.
592-C1HC
The Allen-Bradley 592-C1HC motor starter overload relay is designed to protect AC motors from thermal overload. It is a solid-state relay that uses a current transformer to measure the motor current and activates an alarm or trips the motor in case of over current conditions. The 592-C1HC overload relay is rated for 7 to 37 Amps and can operate at 120 volts AC. It also features jam protection and ground fault tripping capabilities, making it a reliable protection device for NEMA Size 2 motor starters.
592-C1HT
The 592-C1HT solid-state overload relay module was manufactured by Allen-Bradley as part of the Bulletin 500/592 overload relay product line. Its trip class setting is field-selectable and it can support both automatic and manual resetting. The 592-C1HT overload relay also supports a size 00 starter option and 12 to 32 Amperes of current. This relay module weighs approximately 0.95 pounds. The 592-C1HT relay can be panel-mounted and it is CE-certified.
592-EC5BC
Catalog number 592-EC5BC, which was designed and produced by Allen-Bradley, is a solid-state overload relay. This relay belongs to the E3 Plus line of products. It has a total of 8 I/O consisting of 6 inputs and 2 outputs. The current rating of the 592-EC5BC ranges from 3 amperes to 15 amperes. This solid-state overload relay has a contactor ranging from size 0 to size 2.
592-EC5CC
Part number 592-EC5CC is a solid-state overload relay that was manufactured by Allen Bradley/Rockwell Automation. This unit is part of the E3 Plus line of products. This overload relay has a current rating that ranges from 5 amperes to 25 amperes. Additionally, the 592-EC5CC has a contactor size ranging from 0 to 2. This solid-state overload relay has 6 input channels and 2 output channels.
592-EC5PC
The Allen-Bradley 592-EC5PC relay module is a Bulletin 592 and E3 Plus series electronic overload relay. Its current rating is 0.4 to 2 Amps. The 592-EC5PC relay module also supports ground fault protection which includes a balanced external core and which requires an external ground fault sensor. It is programmed by default for 3-phase operation but it can be reprogrammed for single-phase operation if necessary. The 592-EC5PC relay module supports overload and underload protection and warning functions.
