GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Emerson - GE Fanuc

Versamax

The Versamax product series from GE Fanuc includes different industrial controllers. The inputs, which can be sourcing or positive logic inputs, are intended to connect a CPU module with AC input devices such as pushbuttons, switches, and sensors. A negative logic input receives its current from the base terminal and returns it to the input device, whereas a positive logic input receives its current from the inputs and returns it to the common terminal. Additionally, this series of products do not offer point-to-point isolation, but it does allow group-to-group isolation, user actions to optical signal processing isolation, and user input to frame earth isolation, all of which are rated at 250 AC volts for continuous operation and at 1500 V for up to one minute. The PLC backplane supplies power to the input module, so it does not require an additional power source. TTL devices can be used with inputs that have a negative logic configuration. To prevent backplane disturbance during installation, users should ensure that hot injection is carried out correctly. These Versamax Nano and Micro controllers often offer many communication methods, satisfying an operator's control requirements. The placement of the lower and upper tabs is purposeful in order to facilitate a quick and easy installation. The terminal's upper edges fit into slots on the I/O carrier's bottom, and so forth. This module has a fixed coil relay with a moving armature, a switching frequency of 20 cycles per minute with inductance, silver alloy contacts, and a maximum reaction time of 10 milliseconds.

Collage of images depicting Versamax units

GE Fanuc Versamax PLC

A VersaMax PLC is a DIN rail mounted modular chassis-based platform, consisting of a CPU, power supply, assorted I/O, communication, and/or accessory modules, and carrier units (backplanes that modules mount to). Common features across the entire VersaMax Family include:

  • High-powered PLC capabilities in a compact 70mm modular chassis format
  • Stand-alone or fully networked communication options
  • Highly scalable – up to eight I/O or accessory modules per rack, and up to eight racks per VersaMax PLC or I/O Station system
  • Up to 64 modules and 2048 I/O points total per CPU
  • I/O modules up to 32 points each
  • Automatic I/O addressing feature
  • I/O serving two, three, and four-wire devices
  • Programmable in Ladder Diagram, Sequential Function Chart, and Instruction List
  • Floating point (real) data functions
  • Hot-insertion feature for accessory modules, with no impact on running processes
  • Communication protocols including Genius, DeviceNet, Modbus/TCP, PROFINET, PROFIBUS DP, ASi, and Ethernet Global Data (EGD)
  • Two onboard serial ports for RS-232 and RS-485 connectivity 
  • Fully compliant design meeting UL, CUL, CE, UL HazLoc Class 1 Zone 2 and Class 1 Division 2, and ATEX Zone 2 requirements
  • Battery backup for program, data, and time of day clock
  • Non-volatile flash memory for program storage
  • Run/Stop switch
  • Compatible with EZ Program Store device

Configuring a VersaMax PLC requires selecting part numbers for all of the individual modules needed to make up a chassis build-out.

VersaMax PLC Model Selection

Emerson’s VersaMax PLC components span approximately one hundred different part numbers, so it takes a bit of research and preparation to put together a full PLC kit.

CPU Models

Selecting a CPU is perhaps the natural starting point for selecting a build, as you’ll want to size your build based on the application size and functionality desired. GE Fanuc’s original documentation lists the following four (4) CPU models for their VersaMax PLCs. The '002’ and ‘005’ models can still be found in the used parts market. The CPU models are as follows:

  • IC200CPU001: This is a CPU with two (2) serial ports and a 34-kilobyte configurable memory.
  • IC200CPU002: This is a CPU with two (2) serial ports and a 42-kilobyte configurable memory.
  • IC200CPU005: This is a CPU with two (2) serial ports and a 64-kilobyte configurable memory.
  • IC200CPUE05: This is a CPU with two (2) serial ports and an embedded Ethernet interface, as well as a 64-kilobyte configurable memory.

Power Supply Models

Next, we’ll select a Power Supply unit, specified to match the I/O and device interface requirements that we’ll need for our system. Available models (and their carrier backplane) are listed below.

  • IC200PWR001: This is a 24 volts DC Power Supply.
  • IC200PWR002: This is a 24 volts DC Expanded 3.3-Volt Power Supply.
  • IC200PWR101: This is a 120/240 volts AC Power Supply.
  • IC200PWR102: This is a 12/240 volts AC Expanded 3.3-Volt Power Supply.
  • IC200PWR201: This is a 12 volts DC Power Supply.
  • IC200PWR202: This is a 12 volts DC Expanded 3.3-Volt Power Supply.
  • IC200PWB001: This is a Power Supply Booster Carrier.

Carriers and I/O Modules

As mentioned previously, a carrier is GE Fanuc’s term for the backplane that mounts to the DIN rail in your panel, which serves as the mounting surface for all modules.  Carriers provide the physical mounting, inter-module communication, and field wiring connections that together build out your chassis.  Carriers come in three variants, which include:

  • Terminal-style I/O Carriers are modules that are mounted parallel to the DIN rail.
  • Compact Terminal-style I/O Carriers, which are modules mounted perpendicular to the DIN rail.
  • Connector-style I/O Carriers, which are modules mounted perpendicular to the DIN rail. These carriers are normally used with Interposing I/O Terminals.

Carriers are matched to the Modules intended to snap in place, as well as the wiring methods intended to be employed. There are over twenty carrier model numbers to choose from as you select your IO and accessory modules. Additionally, several I/O categories are available for VersaMax PLC systems. These include discrete input modules, discrete output modules, relay output modules, mixed discrete I/O modules, analog input modules, analog output modules, mixed analog I/O modules, and remote I/O interfaces, as well as many more I/O modules.

Network Communication Modules

The last module type to note is the Network Communication Module. As with the carrier group, you’ll want to check manuals and datasheets for specific part numbers, due to the quantity and selection details available.  Please note that PROFIBUS, Ethernet, Genius, and ASI interfaces have specific versions and variants to choose from, as well as specific carriers.

Other Accessories

Emerson’s VersaMax PLCs have a few additional accessories worth mentioning. I/O Interposing Bases offer integrated disconnect means for field devices wired to them and allow other connector-style carriers to interface with field wiring. There are six models to choose from. 

Emerson also offers an EZ Program Store Flash Device, catalog number IC200ACC003, which can be used to store and update the configuration, application program, and reference table data saved on the device out to a PLC.    

Lastly, a series of expansion and Remote I/O options round out the accessories available for the VersaMax.

VersaMax PLC Scalability

As a scalable system, we must not forget that VersaMax PLCs can be expanded to multiple racks, which requires the use of Remote I/O units and Expansion Receiver Modules. VersaMax PLCs can be expanded in either Multi-Rack or Single-Ended schemes.

  • Multi-Rack: This is an expansion scheme using a Transmitter Module in the master CPU rack, and using Expansion Receiver Modules downstream in the slave racks. There are multiple options for each module depending on your distance and networking requirements.
  • Single-Ended: This is an expansion scheme with a direct connection from a master CPU rack to a single slave rack. In this case, a single non-isolated Expansion Transmitter Module (IC200ERM002) can be used, having a maximum cable length of 1 meter.

Emerson Automation supplies a range of expansion cables, terminator plugs, and connector kits for use with expansion racks.

CPU Technical Specifications

CPU Specifications - 001, 002, 005 Models

  • Size:
    • IC200CPU001/002: 2.63 inches x 5.04 inches (66.8 mm x 128 mm)
    • IC200CPU005: 4.20 inches x 5.04 icnhes (106.7 mm x 128 mm)
  • Program Storage: System flash, battery-backed RAM
  • Backplane Current Consumption:
    • IC200CPU001/002
      • No serial port converter or EZ Programs Store device: 40 milliamperes for a 5-volt output and 100 milliamperes for a 3.3-volt output.
      • With a serial port converter or EZ Program Store device: 140 milliamperes for a 5-volt output and 100 milliamperes for a 3.3-volt output.
    • IC200CPU005
      • No serial port converter or EZ Program Store device: 80 milliamperes for a 5-volt output and 290 milliamperes for a 3.3-volt output.
      • With a serial port converter or EX Program Store device: 180 milliamperes for a 5-volt output and 290 milliamperes for a 3.3-volt output.
  • Embedded Communications: These CPUs have RS-232 and RS-485.
  • Boolean Execuation Speed:
    • IC200CPU001/002: 1.8 ms/K (typical)
    • IC200CPU005: 0.5 ms/K (typical)
  • Realtime Clock Accuracy (for timer functions): 100ppm (0.01%) or +/- 9 seconds per day
  • Time of Day Clock Accuracy: 23ppm (0.0023%) or +/- 2 seconds per day at 30 degrees Celsius, as well as 100ppm (0.01%) or +/- 9 seconds per day at a full temperature range.

CPU Configurable Memory - 001, 002, 005 Models

  • Configurable Memory:
    • IC200CPU001: 34k bytes maximum
    • IC200CPU002: 42k bytes maximum
    • IC200CPU005: 64k bytes maximum
  • Application Program Size (Not Configurable): 128 bytes minimum
    • IC200CPU001, for rel. 1.50 compatibility: 12K bytes
    • IC200CPU002, for rel. 1.50 compatibility: 20K bytes
  • Hardware Configuration Size (Not Configurable): 400 bytes minimum
  • Registers (%R): 256 bytes minimum
    • IC200CPU001/002, for rel. 1.50 compatibility: 4,096 bytes
  • Analog Inputs (%AI): 256 bytes minimum
  • Analog Outputs (%AQ): 265 bytes minimum

CPU Specifications - E05 Model

  • Size: 4.95 inches x 5.04 inches (126 mm x 128 mm)
  • Program Storage: System flash, battery-backed RAM
  • Backplane Current Consumption:
    • IC200CPUE05
      • No serial port converter or EZ Program Store device: 160 milliamperes for a 5-volt output and 650 milliamperes for a 3.3-volt output.
      • With a serial port converter or EZ Program Store device: 260 milliamperes for a 5-volt output and 650 milliamperes for a 3.3-volt output.
  • Boolean Execution Speed: 0.5 ms/K (Typical)
  • Relatime Clock Accuracy (for timer functions): 100ppm (0.01%) or +/- 9 seconds per day
  • Time of Day Clock Accuracy: 23ppm (0.0023%) or +/- 2 seconds per day at 30 degrees Celsius, as well as 100 ppm (0.01%) or +/- 9 seconds per day at the full temperature range.
  • Embedded Communications: This CPU has RS-232, RS-485, and an Ethernet Interface.
  • Configurable Memory: 64K bytes maximum
  • Ethernet Interface Specifications:
    • Number of SRTP Server Connections: 8
    • Ethernet Data Rate: 10 Mbps
    • Physical Interface: 10BaseT RJ45

CPU Configurable Memory - E05 Model

  • Configurable Memory: 64K bytes maximum
  • Application Program Size (Not Configurable): 128 bytes minimum
  • Hardware Configuration Size (Not Configurable): 528 bytes minimum
  • Registers (%R): 256 bytes minimum
  • Analog Inputs (%AI): 256 bytes minimum
  • Analog Outputs (%AQ): 256 bytes minimum

Browse our selection of Versamax units

AutomationStop.com's online catalog offers one of the largest selections of preowned Versamax units in the world.

IC200TBM002

The GE Fanuc IC200TBM002 is a Versamax connector strip. It offers a connection point for carriers and interposing Versamax series terminals. This termination can also be utilized with two wires, including AWG #18. The auxiliary I/O terminal strip from GE Fanuc Automation, model number IC200TBM002, features 18 wiring terminals and an IEC box design with internal bussing. The terminal strip includes tabs for connecting to a preceding carrier and a slot for the following terminals.

IC200TBM005

The GE IC200TBM005 terminal strip is a Versamax series terminal strip. It is compatible with terminal-style I/O carriers and and with interposing terminals. The terminals on the IC200TBM005 terminal strip are spring-clamp style terminals and there are 18 of them. These 18 terminals are all internally bussed. The IC200TBM005 terminal strip allows interposing terminals and terminal-style I/O carriers to support extra connections for field wiring.

IC200PNS001

This module, Catalog ID IC200PNS001, is mostly used to construct distributed I/O architecture as it provides communication via Profinet networks up to 2880 total bytes of continuous I/O data and 2880 bits of analog I/O data at a maximum distance of 100 meter per segment at 10/100 mbps. This module primarily supports Class A I/O for Profinet Slave version 2.2. Additionally, the firmware can be upgraded in the field using the USB port.

IC200PNS002

The GE Fanuc IC200PNS002 module is a Versamax series PROFINET Scanner (PNS). It contains two mbps (SC-Duplex) Multi-Mode Optic (MMF) connections and a 1.10 Amperes at 5 Volts DC (5 Watts) power consumption rating. When everything works as it should, the "OK" LED will glow continuously in green. If the scanner is not configured to restart automatically in the event of a power failure or machine malfunction, the "OK" LED for the other modules will be off or flashing.

IC200PWB001

To connect an additional power supply in series with other modular carriers in a system, utilize the GE Fanuc Power Distribution Booster Carrier, Catalog ID IC200PWB001. Users will need to unscrew the IC200PWB001 Power Supply Booster Carrier from the DIN rail in order to remove it. Booster carriers have mating connectors on the sides, therefore if the booster carrier is installed between two other carrier units, the users will need to dismount one of the other units.

IC200PWR001

A 24 Volt Direct Current power supply input module from the Versamax series is the IC200PWR001 GE Fanuc module. It features a 24 Volts DC input voltage, 3.3 Volts DC output voltage, and 5 Volts DC output voltage. A 24 VDC input is required to operate the GE Fanuc IC200PWR001 power supply input module, which then provides an output of either 5 VDC or 3.3 VDC. The power supply provides up to 10 milliseconds of holdup time and a 10 Watt input power rating. Power isolation and auxiliary power are not available for this module.

IC200PWR002

The IC200PWR002 is a power distribution module member of the VersaMax product group. This power supply module has an input supply voltage range of 18 to 30 Volts DC and is a 24 Volts DC expanded power source. It can accept input voltages up to 24 Volts DC and produce either 3.3 or 5 Volts DC. The module's output current is limited to 1.5 Amperes, regardless of whether the voltage is 5 Volts DC or 3.3 Vplts DC. It features a longer power supply option but no isolated power.

IC200PWR101

The Versamax series' power supply module is the GE Fanuc IC200PWR101. Its output voltages are 5 Volts DC & 3.3 Volts DC, and its input voltage is 120/240 Volts AC. In the case of a 3.3 Volts output, the maximum current will be 0.25 Amperes, while a 5 Volts output will produce 1.5 Amperes (after subtracting the 3.3 Volts consumed current). It operates at 47–63 hertz. The holdup time for this device is roughly 20 ms.

IC200PWR102

This Allen Bradley module, Catalog ID IC200PWR102, is a power distribution module member of the VersaMax product group. This hardware has an inbuilt short circuit & overload protection for module protection. This supply module has an input supply voltage of 85-132 VAC / 176-264 VAC, 47-63 Hz, and outputs 120 / 240 VAC. It can put out either 5 VDC or 3.3 VDC, and its output current is a maximum of 1.5 Amperes at 5 VDC and 1.0 Amperes at 3.3 VDC.

IC200PWR201

The GE Fanuc IC200PWR201 was designed to be a power supply module for Versamax control systems. It is rated at 12V DC. The IC200PWR201 power supply module operates as a backplane power supply for devices such as I/O modules, NIU devices, and CPU devices. The rated output current of the IC200PWR201 power supply module is 1.5 Amps. It can provide 5V DC or 3.3V DC of output voltage.

IC200PWR202

The GE Fanuc Versamax IC200PWR202 power supply is an expanded power supply. It can provide 1.5 Amps of output current with output voltage ratings of 3.3 Volts or 5 Volts. The IC200PWR202 power supply supplies the backplane power for Versamax system CPUs, NIUs, and I/O modules. Its nominal input voltage is 12V DC and its input power is 11 W.

IC200SET001

This module, Catalog ID IC200SET001, is primarily used to enable industrial Ethernet network connectivity for VersaMax Micro & nano controllers. The Ethernet interface, which offers a 10/100 mbps transfer rate and has one (1) RS232 port and (1) RS485 port, allows users to upload, download, and monitor applications. This component allows serial devices to communicate using the TCP/IP protocol via an Ethernet connection. Users can hook up all sorts of peripherals, including CNCs, terminals, PLCs, and displays.

IC200MDL644

A GE Fanuc 5/12 Volts DC positive/negative logical input module with 32 input points divided into 4 groups is the IC200MDL644 Dynamical Input Module. It has an input voltage range of 0 to 15 Volts DC, an input impedance of 2.4K Ohms, and a backplane current usage of 140 milliamperes at 5 Volts. In order to ensure compatibility with TTL devices, it is advised that the inputs be set up as negative logic. Furthermore, the filter time can be adjusted in software from 0 to 1.0 or 7.0 milliseconds, and the input response time can be set manually.

IC200MDL650

This module, Catalog ID IC200MDL650, comprises four groups of eight channels each, totaling thirty-two (32) channels that may handle both positive and negative logical wiring setups. This module's input channels each have a 24 VDC rating, a 0 to 30 VDC input signal range, and an input current range of 2.0 to 5.5 mA. This module is installed to a standard DIN rail and support horizontal and vertical orientation. A distinct LED indicator shows each input channel's activation status.

IC200MDL730

It features a 0.5 millisecond reaction time, an output voltage range of 17.5 - 30 Volts DC, and an input voltage range of 18 -30 Volts DC. GE Fanuc produces the IC200MDL730 Multifunction Output Module. It is a 24 Volts DC Versamax positive processing input module. LEDs on the output module glow amber to signal the presence of problems like short circuits or overloads. In the Versamax PLC system, the central processing unit (CPU) is responsible for identifying these flaws, also known as point faults.

IC200MDL740

GE Fanuc manufactures this Standalone Output Module, Catalog ID IC200MDL740. It is a 12/24 Volts DC Versamax Affirmative Logic Output Module. It includes 16 discrete outputs, an external power source voltage range of 10.2 to 30 volts DC, a nominal voltage of 12 or 24 volts DC, and a backplane current usage of 45 milliamperes. Filter time is adjustable, with a maximum response time of 0.2 ms and an off response time of 1.0 ms. It uses backplane power and has a separate external power source for the load side.

IC200MDL741

Positive logic output device rated for 0.5 Amperes and 24 Volts DC is this Single Axis tracking Module, Catalog ID IC200MDL741, from GE Fanuc. It has 16 discrete outlets in one group, an external power source, and an output voltage range of 18 to 30 Volts DC. Each outlet has its own set of LED indications showing if it is on, off, or overloading. The output voltage spans 18 - 30 Volts of Direct Current, and the module can handle a peak load power of 0.5 Amperes at 30 Volts DC. The fastest on/off time is capped at 0.5 ms.

IC200MDL742

GE Fanuc produced 24 Volts. DC positive logical output module called the Discrete Input Module, Catalog ID IC200MDL742. It draws 150 microamperes of backplane power and has 16 separate outputs in 2 groups with an output voltage span of 18 - 30 Volts Direct Current. LEDs at each output show if the device is on or off and whether there is an overload. This drive has a peak backplane current consumption rating of 150 mA, a load power of 0.5 Amperes at 30 Volts Direct Current, and an on/off response time of 0.5 milliseconds.

IC200MDL743

The Versamax range of devices includes this Single Output Module, Catalog ID IC200MDL743. It is a 5, 12, & 24 Volts DC Negative Circuit Output Module. It contains an external power source and 16 discrete outputs organized into one group. To simplify the wiring procedure, there are a variety of carriers to choose from, including box-style and spring-style compact carriers. With its automated I/O addressing characteristics, the IC200MDL743 Discrete Output Module makes PLC-based industrial control applications a breeze.

IC200MDL744

The IC200MDL744 output module is a GE Fanuc Versamax output module with 2 groups of 16 outputs each. All 32 outputs on the IC200MDL744 module are negative outputs or sinking-type outputs. These negative outputs operate by switching loads to the negative or return side of the system's DC supply and they receive their current from the loads. The IC200MDL744 module's intelligent processing is performed for it by the system NIU or CPU.

IC200MDL750

This GE Intelligent Platforms module, Catalog ID IC200MDL750, contains two (2) sets of sixteen channels each and thirty-two (32) output lines that allow positive logic wiring setup. Each of the 32 total outputs features both a DC+ and DC- connector. When inductive loads are wired into the output module, an external suppression circuit is used. The module has been approved for use in a hazardous environment of Class I, Division 2.

IC200MDL930

This module, Catalog ID IC200MDL930, includes eight independently isolated Usually Open (N.O.). Additionally, it contains a single component OK LED to show if the module is receiving an active source of backplane power. This module's eight (8) Normally Open (N.O.) or Form A contacts are rated for nominal voltages of 0 to 125VDC, 5/24/125VDC, and 0 to 265VAC (47 to 63Hz), 120/240VAC, with a current rating of 2.0 Amperes. Each of the module's 8 locations is equipped with its own LED light to show whether or not it is receiving field power.

IC200MDL940

This module, Catalog ID IC200MDL940, includes sixteen (16) individually separated Normally Open (N.O.) / Form A contacts with nominal output voltage ratings of 0 to 125 VDC, 5/24/125VDC, and 0 to 265 VAC (47 -63 Hertz), 120/240VAC, and output contact ratings of 2.0 Amperes each. The IC200MDL940 can draw up to 490 mA from the backplane and needs a power supply that can deliver between 0 and 265VAC (47 - 63 Hertz) at a nominal 120/240VAC.

IC200NAL110

The IC200NAL110 PLC is a Versamax Nano PLC that was manufactured by GE Fanuc. It has 10 discrete I/O channels. These discrete I/O include 6 inputs rated at 12V DC and 4 relay outputs. The IC200NAL110 PLC also has a 0 to 10V analog input. This PLC does not have a fuse or any pulse outputs. The IC200NAL110 PLC's outputs are all normally open and they can function as up to 3 high-speed counter outputs but not as pulse train outputs or as pulse width outputs.

IC200NAL211

The IC200NAL211 PLC is a GE Fanuc Versamax Nano PLC. It has 6 DC inputs, 1 analog input, and 4 relay outputs. It uses a 24V DC-rated power supply. The IC200NAL211 PLC's 4 outputs are all NO or normally open outputs. Its analog input can operate with 0-10 Volts and its 6 DC inputs can support positive or negative logic.

IC200NDD010

A NANO PLC control system for the Versamax series is this controller, Product ID IC200NDD010. It has four outputs with a 12 Volts DC rating. Each of the NANO PLC's 10 I/O terminals is equipped with an LED indicator that displays power and connection status. On the front of the PLC are two LED indicators: the "FLD PWR" and "OK" LEDs. The IC200NDD010 controller is safe to use in a Class I Division 2 environment so long as certain regulations are met.

IC200NDD101

GE Fanuc's Versamax series uses a NANO controller called the IC200NDD101. There are four DC outputs and six DC inputs. The IC200NDD101 controller has an RJ-45 serial connector for communicating with a PC for setup and customization. The controller's data and information can be obtained via the functions' buffer. At 19.2 Volts DC, the controller's holdup time is rated at 10 ms. At 30 Volts DC, the inrush current lasts for only 10 ms. The controller's DC inputs can be used for conventional and fast counter inputs.

IC200NDR001

A Versamax series Nano PLC component developed by GE Fanuc includes this controller, Catalog ID IC200NDR001. It can withstand a voltage of 24 DC volts. The RS-485 adapter with the IC200NDR001 controller allows for multi-drop connections and is compatible with the controller's modem. There is a 10-ms holdup in the power supply. For 30 Volts DC, the NANO controller has a 1 Ampere inrush current. It can withstand vibrations between 57 and 500 Hertz and shocks of up to 15 G for up to 11 ms.

IC200PBI001

A Profibus Network Adapter Unit, or NIU, from the GE Fanuc Versamax series is the IC200PBI001 module. It was developed and produced by GE Fanuc. It needs 250 mA from the 5 Volts bus and 10 mA from the 3.3 Volts bus. Each network node contains 64 I/O modules. Expansion racks allow it to grow as needed. Each GE Fanuc device has a unique Profibus network address between 1 and 125.

IC200MDL243

The GE Fanuc Multifunction Input Module, Product ID IC200MDL243, is a Versamax I/O & Control System type. This module features 16 individually separated inputs with a maximum backplane present consumption of 100 milliamperes and an operating voltage of 120 Volts AC. The IC200MDL243 Input Module can take input voltages between 0 and 132 volts AC, with a nominal rating of 120 volts AC. The on-state operating range of the IC200MDL243 Input Module is 70 to 132 Volts AC, and the maximum reaction time is 1 cycle.

IC200MDL244

The GE Fanuc Versamax IC200MDL244 module is a discrete input module. It has 8 input points. The IC200MDL244 input module has high isolation requirements and this means that it needs to be used with specific carriers that are compatible with its isolation requirements. Its voltage rating is 240V AC. The IC200MDL244 module's 8 inputs can operate as sourcing inputs or as positive logic inputs. It operates with backplane power.

IC200MDL329

This GE Fanuc Dynamical Output Module, Catalog ID IC200MDL329, is designed to work with the Versamax I/O & control system. This module features eight independently isolated outputs with a maximum backplane current consumption of 70 milliamperes and an operating voltage of 120 VAC. An AC-powered discrete output device for the Versamax I/O & control system is the GE Fanuc IC200MDL329 Versamax Freestanding Output Module. A Versamax PLC's interface between the CPU and output devices is provided by this module.

IC200MDL330

The backplane supplies 140 mA of current to this module, Catalog ID IC200MDL330. A discrete output module from the VersaMax I/O platform is the IC200MDL330. Each of the sixteen (16) isolated output channels on this module provides a 120 VAC signal at a frequency of 47 to 63 hertz and a voltage of 85 to 132 volts AC. This module has a current draw of 140 mA generated from the backplane.

IC200MDL331

The IC200MDL331 is an 8-point output module from the GE Fanuc Versamax product line. This outout module has 8 isolated outputs which are all discrete outputs. The IC200MDL331 module operates with 2 Amps of rated current and it needs an external power supply which is rated at 120V AC to switch power to its loads. The IC200MDL331 module's output voltage range is 85-132 Volts AC.

IC200MDL631

The IC200MDL631 input module is a GE Fanuc Versamax input module rated at 125V DC. It comes with 8 isolated input channels. The IC200MDL631 input module's inputs can all be configured to support positive logic or negative logic. The operating power for the IC200MDL631 input module is provided by the system backplane and the intelligent processing functions are performed by the system NIU or the system CPU.

IC200MDL632

The IC200MDL632 input module is a discrete input module in the GE Versamax series. It comes with 16 inputs and these inputs can operate as positive logic or negative logic inputs. When they operate as positive logic types of inputs, the IC200MDL632 module's inputs receive their current from input devices and they return it on the return. When they operate as negative logic inputs, the IC200MDL632 module's inputs receive their current from the return terminals in the system and they return that current to the input devices in the system.

IC200MDL635

The IC200MDL635 is a discrete type of input module in the GE Fanuc Versamax series. It has 16 positive/negative logic types of inputs. The IC200MDL635 input module's DC voltage rating is 48 Volts DC. The module hosts 2 groups with 8 inputs each. The IC200MDL635 input module's discrete input data rating is 16 bits. Its backplane current consumption rating is 70 milliamps maximum at 5 Volts of output voltage.

IC200MDL636

The IC200MDL636 module is a GE Fanuc Versamax input module equipped with 32 grouped inputs that are all discrete. The voltage rating for the IC200MDL636 input module is 48V DC. All 32 inputs may be configured to operate with positive logic or with negative logic. Positive logic inputs receive their current from the connected input devices while negative logic inputs receive their current from the system common. The IC200MDL636 module can support filtering.

IC200MDL640

The GE Fanuc 24 Volts DC favorable logical input component with 16 points in the Versamax seires is called the IC200MDL640 Dynamical Input Module. There are two groups made up of the 16 inputs. Users are encouraged to utilize a shorting bar in conjunction with the B Terminal to arrange additional bussed terminals while doing field wiring neatly. Insertion of the IC200MDL640 Discrete Input Module can be done when it is powered. However, special attention during installation is required to prevent backplane interference.

IC200MDL643

The IC200MDL643 module is an input module with 16 discrete grouped inputs. It was made by GE Fanuc as a Versamax series input module for application in Versamax automation systems. The IC200MDL643 module is capable of operating at 5/12V DC and its 16 inputs are capable of operating with positive or negative logic. When the IC200MDL643 module's inputs are configured for negative logic, they can connect to TTL devices.

IC200CHS121

The GE Fanuc Versamax IC200CHS121 base is a main base made for hosting Versamax I/O modules in automation systems. It supports interposing I/O terminals which are fuse-style terminals. These fuse-style terminals correspond to the "A" terminals on a compatible Versamax series I/O module. The IC200CHS121 main base has 36 total terminals and it has a J1 connector for a cable. Its terminals include several common terminals that reduce the need for auxiliary terminal blocks in the system.

IC200CHS122

The GE Fanuc IC200CHS122 base is an expansion base from the GE Versamax series that is designed to host certain types of I/O modules from the GE Versamax series. It has fuse-style terminals. The IC200CHS122 expansion base is usually used alongside a Versamax main base. Both Versamax bases are used to host a Versamax I/O module. The IC200CHS122 expansion base's terminals are compatible with the "B" terminals that are found on some Versamax I/O modules, and the main base installed alongside the IC200CHS122 base has terminals that are compatible with the I/O module's "A" terminals.

IC200CHS211

The IC200CHS211 relay base from GE Fanuc is a Versamax is an interposing relay base. It enables a Versamax I/O module to be connected to a variety of termination bases. The IC200CHS211 relay base will provide extra protection and higher amperage outputs to the I/O module. It also enables the users to easily disconnect signals from individual I/O points on the I/O module. The relays on the IC200CHS211 relay base are replaceable.

IC200CMM020

A serial communication unit in the Versamax line created by GE Fanuc is the IC200CMM020 module. There are serial connection ports on it. It has a 15-pin D-type connector, an RS-232 port, and an RS-485 port. The IC200CMM020 module supports full and half duplex connections at baud rates of 1200, 2400, 4800, 9600, or 19200. At 5 Volts output voltage, this communication module needs 460 mA of current, but at 3.3 Volts it needs only 5 mA.

IC200CPU001

With programmable memory of 34K Bytes, this CPU, Catalog ID IC200CPU001, is a small controller that provides processing of 2048 distinct inputs & 2048 discrete outputs. Built-in connection interfaces include RS232 & RS485 ports that are RTU Slave, SNP Slave, & Serial I/O compatible. Furthermore, it has a Boolean execution speed of 1.8 ms / K. The CPU has a real-time clock and battery-backed memory. The clock keeps track of epochs that are crucial to the function. At any temperature, the precision of the real-time clock is 100 ppm.

IC200CPU002

For internal connection, the CPU module has RS-232 & RS-485 serial interfaces. GE is the manufacturer of the CPU module known as IC200CPU002. Under typical conditions, the battery will last for five years. The Run/Stop switch on the IC200CPU002 CPU allows you to power it on and off. The central processing unit can handle both floating point & real data operations. Behind the module door, is a Run/Stop switch that can be used to begin or end the data writing process or make adjustments to the isolated data.

IC200CPU005

This Product ID IC200CPU005 is a CPU with user-configurable memory. It is produced for the Versamax line by GE Fanuc. For the internal network, RS-232 & RS-485 serial interfaces have been built. The random access memory (RAM) and the real-time clock in the IC200CPU005 CPU are powered by a detachable battery. As it operates, the real-time clock records a variety of timestamps. The CPU needs to be properly grounded to prevent electrical harm.

IC200CPUE05

A GE Fanuc VersaMAx controller module is this Allen Braldey drive, Catalog ID IC200CPUE05. This controller supports a maximum of 64 module or 2048 I/O points and has an average Boolean execution time of 0.8 ms/K. The super capacitor inside can store data for up to an hour before handing off to the battery, which can keep it safe for up to six months. The fitted battery has a shelf life of up to 5 years.

IC200DBI001

Each station may accommodate 8 I/O modules. A network interface module from GE is called the IC200DBI001. This interface module needs 160 mA from the 5 Volts bus & 10 mA from the 3.3 Volts supply. The module includes several different kinds of connectors. It uses a 5-pin open standard-style connector and is compatible with CAN H, V+, CAN L, Shield, V0 signals. A resistor creates a passive termination at the network's endpoint.

IC200EBI001

A Network Interface Unit (NIU) from the VersaMax series of Programmable Logic Controllers (PLC) is the IC200EBI001. This module has LED status indications for PWR, OK, and FAULTS, among others. The I/O modules necessary to construct a distributed I/O architecture are hosted and controlled by this module, which acts as an ethernet slave module. The auto-negotiation 10/100 Mbps Ethernet transmission speed on its single RJ45 connector is a nice feature. There's room for up to 1024 bytes of I/O, with a matching 512 bytes of input and output. Up to 64 I/O modules and 7 extension racks can be installed.

Previous

1 2 3 Next

Displaying 50 of 113 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP