GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1321-3R200-B |
Series: | 1321 |
Description:
Part number 1321-3R200-B by Allen-Bradley is a line reactor from the Bulletin 1321 series. This input output line reactor is a three-phase device. The current rating for this reactor is 200 amperes. These reactors are equipped with harmonic compensation. They meet the electrical safety standards and are certified. These components provide both input and output protection. The voltage rating for this reactor is between 600 volts AC and 690 volts AC for different terminals.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
1321-3R200-B reactors are widely used because of their features. They help to provide protection against current surge, power surge and other types of harmonic distortions. These provide safety against different types of errors. The current rating for this device is 200 amperes. The operating frequency is given as 50-60 hertz. Similarly, the switching frequency is rated at 20 kilohertz. The rated voltage of this device is 600 to 690 volts alternating current (AC). The impedance is 3% to 5%. The overload rating is 200% of the value of fundamental current for a duration of 30 minutes and 300% of fundamental value of current for a duration of 1 minute. This reactor is also equipped with dv/dt protection. The dielectric strength for this product is 3000 volts rms. The inductance curve changes at different values. Typically, this device is 100% at 100% current, 100% at 150% current, and 50% at 350% current. The induction tolerance rating of this Allen-Bradley product is ±10%. The insulation system is categorized as Class N. The ambient temperature for open style reactor is 50 degrees Celsius and 40 degrees Celsius for an enclosed style reactor. The altitude rating is 1000 meters. The storage temperature rating is from -40 to +70 degrees Celsius, whereas the humidity should remain non-condensing and range from 9 to 95 percent. The reactor meets all agency approvals and finds application in different industrial settings. These should be installed according to instructions provided to avoid any damage to any component or system. For applications where reactors having a rated voltage greater than 160 amperes are used, it is preferred to use cable style connections.
Question: Does Automation Stop offer repairs on the 1321-3R200-B?
Answer: Yes. We offer repairs for the 1321-3R200-B and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1321-3R200-B?
Answer: If you buy the 1321-3R200-B through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1321-3R200-B online?
Answer: Yes. Automation Stop sells the 1321-3R200-B online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1321-3R200-B?
Answer: The 1321-3R200-B is made by Allen Bradley - Drives.
For additional information about 1321-3R200-B check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1321-3R200-B.
Revision Part # | Also Known As | Availability |
---|---|---|
1321-3R200-B/A | 1321-3R200-B Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.