GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1336-MOD-L3 |
Series: | 1336 Adjustable |
Description:
The 1336-MOD-L3 is a control interface board designed by Allen Bradley Rockwell Automation. It operates on an input power range of 115V DC. It comes with the (NEMA Type 4) protection rating. This product is fit for the 3 phase motors. It is normally used to control the frequency and voltage adjustment to ensure smooth torque and speed control. Besides that, this interface board allows users to program in elements and groups.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
1336-MOD-L3 is the control interface board that is often categorized as logic is a hardware component. The product has a NEMA (type 4) safety rating for safety. It takes a 115V DC voltage rating and a self-contained NEMA (type 1) enclosed assembly wired to a 1336 AC drive. This part briefly addresses specific user demands in a wide range of motor-related applications in a standard industrial setup. The MOD-L3 interface, in particular, is separated from the drive's core circuitry. In principle, it can provide users with a frequency and voltage output that users can modify. Besides that, these same functions make controlling the motor's maximum speed and torque easier. Likewise, its output can also deliver great results on several machines under various load situations. Aside, it gives users complete control over all of their machine's speed control needs.
Moreover, it comprises common assembling pieces that eliminate the need for a wide range of different parts. In addition, this drive also has serial communications, which keeps things simple to incorporate and access peripheral equipment, and it is completely compatible with a variety of devices. Furthermore, this interface board has a starting acceleration and a running torque paired with a continuous torque-speed within that range. As a result, it can perform even the most rigorous applications. Its innovative look offers good performance and reliability when deployed to regulate three-phase power motors. It has minimal packaging that enables mounting, installation, and cabling easier in various applications. It is made up of simple tuning features that enable direct torque performance.
Question: Does Automation Stop offer repairs on the 1336-MOD-L3?
Answer: Yes. We offer repairs for the 1336-MOD-L3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1336-MOD-L3?
Answer: If you buy the 1336-MOD-L3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1336-MOD-L3 online?
Answer: Yes. Automation Stop sells the 1336-MOD-L3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1336-MOD-L3?
Answer: The 1336-MOD-L3 is made by Allen Bradley - Drives.
Question: What type of product is the 1336-MOD-L3?
Answer: The 1336-MOD-L3 is part of the 1336 Adjustable series.
Question: What voltage does the Allen Bradley - Drives 1336-MOD-L3 have?
Answer: The Allen Bradley - Drives 1336-MOD-L3 includes a voltage of 115.
For additional information about 1336-MOD-L3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1336-MOD-L3.
Revision Part # | Also Known As | Availability |
---|---|---|
1336-MOD-L3/A | 1336-MOD-L3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.