GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1398-DDM-019X

✓ In Stock

1398-DDM-019X Image 1 thumbnail
1398-DDM-019X Image 2 thumbnail
1398-DDM-019X Image 3 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 1398-DDM-019X
Series: Servo Drive 1398

Description:

The Allen-Bradley 1398-DDM-019X servo motor drive provides high performance in a very reduced size to control sinusoidal AC brushless motors and for a wide range of applications. The Allen-Bradley 1398-DDM-019X servo motor drive can be used as indexing, velocity servo, stepper drivers or master encoder followers. The Allen-Bradley 1398-DDM-019X servo motor drive supports a single phase input voltage of 115/230 volts AC and a continuous input current of 18 amperes. This Allen-Bradley 1398-DDM-019X servo motor drive delivers a continuous output current of 10 amperes and a continuous output power of 2 kilowatts. The Allen-Bradley 1398-DDM-019X servo motor drive includes an RS-232 serial port, four-wire RS-485 and a Devicenet communication port with a maximum baudrate of 500 kilobits per second. The Allen-Bradley 1398-DDM-019X includes digital control loops which can be used for velocity, torque or position control. This Allen-Bradley 1398-DDM-019X servo motor drive can operate at a temperature range of -5 degrees to 55 degrees Celsius (23 degrees to 131 degrees Fahrenheit) for industrial applications and weighs approximately 2 kilograms (4.4 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$1,611.00

Available: 3

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$1,289.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1398-DDM-019X? We can help!

Request a Quote

Key Features:

  • has dimensions of 7.80 x 3.83 x 5.75 in (198.12 x 97.30 x 146.05 mm)
  • provides a 32-131 f (0-55 c) operating temperature

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1398-DDM-019X servo motor drive provides high performance in a very reduced size to control sinusoidal AC brushless motors and is used for a wide range of applications. The Allen-Bradley 1398-DDM-019X servo motor drive can be used as indexing, velocity servo, stepper drivers or master encoder followers. The Allen-Bradley 1398-DDM-019X servo motor drive supports a single phase input voltage of 115/230 volts AC and a continuous input current of 18 amperes. This Allen-Bradley 1398-DDM-019X servo motor drive delivers a continuous output current of 10 amperes and a continuous output power of 2 kilowatts. The Allen-Bradley 1398-DDM-019X servo motor drive includes an RS-232 serial port, four-wire RS-485 and a Devicenet communication port with a maximum baud rate of 500 kilobits per second. The Allen-Bradley 1398-DDM-019X includes digital control loops which can be used for velocity, torque or position control.

The Allen-Bradley 1398-DDM-019X servo motor drive includes four optically isolated selectable digital inputs and two optically-isolated selectable digital outputs. This Allen-Bradley 1398-DDM-019X servo motor drive contains one analog current limit input and one user-programmable analog output for variable controlling or torque sharing. The Allen-Bradley 1398-DDM-019X servo motor drive has an analog to digital (A/D) converter with a resolution of 14-bit to command the input velocity. The Allen-Bradley 1398-DDM-019X servo motor drive includes an internally-shielded filter for electromagnetic compatibility (EMC). This Allen-Bradley 1398-DDM-019X servo motor drive can operate at a temperature range of -5 degrees to 55 degrees Celsius (23 degrees to 131 degrees Fahrenheit) for industrial applications and weighs approximately 2 kilograms (4.4 pounds) while shipping.

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series ULTRA 100 series servo motor drive
Part Number 1398-DDM-019X
Input voltage 100 to 240V AC RMS nominal (88 to 265 Volts), single phase
Input frequency 47-63 Hz
Peak output current 30A
Continuous output current 10A
Continuous output power 2.0 kW
Continuous input current 18 A
Analog velocity/torque input ±10 Volts
Serial Communication Port RS-232, four-wire RS-485
Baud rate 1,200 to 19,200 baud
DeviceNet 125 kps (default), 250 kps, or 500 kps
Control Loops Torque, velocity, and position control
Operating temperature -5ºC to 55ºC (23ºF to 131ºF)
Humidity 5% to 90%, non-condensing
Weight 2.0 kg (4.4 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1398-DDM-019X?

Answer: Yes. We offer repairs for the 1398-DDM-019X and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 1398-DDM-019X?

Answer: If you buy the 1398-DDM-019X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1398-DDM-019X online?

Answer: Yes. Automation Stop sells the 1398-DDM-019X online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1398-DDM-019X?

Answer: The 1398-DDM-019X is made by Allen Bradley - Drives.


Question: What type of product is the 1398-DDM-019X?

Answer: The 1398-DDM-019X is part of the Servo Drive 1398 series.


Question: What is the Analog velocity/torque input of the Rockwell Automation 1398-DDM-019X?

Answer: The 1398-DDM-019X has a Analog velocity/torque input of ±10 Volts.


Question: What Baud rate does the Allen-Bradley 1398-DDM-019X have?

Answer: The Baud rate of the Allen-Bradley 1398-DDM-019X is 1,200 to 19,200 baud.


Question: What Brand is included with the 1398-DDM-019X?

Answer: The Rockwell Automation 1398-DDM-019X has a Allen Bradley / Rockwell Automation Brand.


Question: What is the Continuous input current of the 1398-DDM-019X?

Answer: The Rockwell Automation 1398-DDM-019X has a Continuous input current of 18 A.


Question: What is the Continuous output current of the 1398-DDM-019X?

Answer: The 1398-DDM-019X has a Continuous output current of 10A.


Question: What is the Continuous output power of the 1398-DDM-019X?

Answer: The 1398-DDM-019X has a Continuous output power of 2.0 kW.


Question: What kind of Control Loops does the 1398-DDM-019X have?

Answer: The Allen-Bradley 1398-DDM-019X has Control Loops Torque, velocity, and position control.


Question: What DN does the 1398-DDM-019X have?

Answer: The Rockwell-Automation 1398-DDM-019X has a DN of 125 kps (default), 250 kps, or 500 kps.


Question: What Humidity does the 1398-DDM-019X have?

Answer: The Humidity of the 1398-DDM-019X is 5% to 90%, non-condensing.


Question: What Input frequency does the 1398-DDM-019X have?

Answer: The Allen Bradley/Rockwell Automation 1398-DDM-019X has a Input frequency of 47-63 Hz.


Question: What is the Input voltage of the Allen Bradley Automation 1398-DDM-019X?

Answer: The Input voltage of the 1398-DDM-019X is 100 to 240 volts alternating current (AC) RMS nominal (88 to 265 Volts), single phase.


Question: What Operating temperature does the Allen Bradley-Rockwell Automation 1398-DDM-019X have?

Answer: The Operating temperature of the 1398-DDM-019X is -5ºC to 55ºC (23ºF to 131ºF).


Question: What is the part Number of the 1398-DDM-019X?

Answer: The component Number of the 1398-DDM-019X is 1398-DDM-019X.


Question: What is the Peak output current of the 1398-DDM-019X?

Answer: The 1398-DDM-019X has a Peak output current of 30A.


Question: What is the Serial Communication Port of the Rockwell Automation 1398-DDM-019X?

Answer: The Serial Communication Port of the Rockwell Automation 1398-DDM-019X is RS-232, four-wire RS-485.


Question: What is the Weight of the 1398-DDM-019X?

Answer: The Allen Bradley-Rockwell Automation 1398-DDM-019X has a Weight of 2.0 kg (4.4 lb).


Series information for 1398-DDM-019X

For additional information about 1398-DDM-019X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1398-DDM-019X.

Revision Part # Also Known As Availability
1398-DDM-019X/A 1398-DDM-019X Ser A, Series A, Rev A Request a Quote
1398-DDM-019X/B 1398-DDM-019X Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 1398-DDM-0I9X
  • 1398-DDM-O19X
  • 1398-DDM-OI9X
  • 139B-DDM-019X
  • 139B-DDM-0I9X
  • 139B-DDM-O19X
  • 139B-DDM-OI9X
  • I398-DDM-019X
  • I398-DDM-0I9X
  • I398-DDM-O19X
  • I398-DDM-OI9X
  • I39B-DDM-019X
  • I39B-DDM-0I9X
  • I39B-DDM-O19X
  • I39B-DDM-OI9X

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP