GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1398-PDM-030 |
Series: | Servo Drive 1398 |
Description:
The ULTRA Plus PDM drive model 1398-PDM-030 is versatile in application from a distributed motion control system with a central computer to a stand-alone, programmable motion controller. The drive has in-built optically isolated I/O and power supplies.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1398-PDM-030 is a ULTRA Plus PDM motion control system used for positioning drive systems by combining an advanced sinusoidal brushless motor velocity controller and a programmable position controller together. It uses a fast microprocessor to handle position and velocity simultaneously. By integrating the two systems, the product removes common issues of analog circuits such as offset or thermal drifting. The digital closed loop control also allows for data acquisition and logging. The system consists of positioning drive module that controls the position, velocity and torque of the motor, personality module to match the controller with the connected motor, a brushless motor for optical encoder feedback, power supply module, and operator terminal. The 1398-PDM-030 has passed all EMC tests. It shows sensitivity to radiated fields of 10 V/m in the encoder feedback circuit. Its current rating is single phase 28 Amperes. The peak output current is 30 Amperes and continuous output is 15 Amperes with 3 kW power rating. The line input voltage is 100 to 240 Volts AC with continuous shunt power of 50 Watts and peak shunt power of 4.5 kW. The external continuous shunt is 2.4 kW and peak is at 6 kW. In addition to the dissipative shunt, the drive has a maximum power loss of 150 Watts. The unit weighs 15 pounds (5 kilograms) and is functional in the range of 32 to 140 degrees Fahrenheit (0 to 50 degrees Celsius). It can be stored over a temperature range of -40 to 176 degrees Fahrenheit (-40 to 80 degrees Celsius).
Product series | ULTRA Plus PDM |
Current rating | Single phase 28 Amp |
Maximum power losses | 150 + dissipative shunt (W) |
Peak output current | 30 A |
Continuous output current | 15 A |
Continuous power output | 3 kW |
Line voltage input | 100-240 V AC (50/60 Hz) |
Continuous shunt power | 50 W |
Peak shunt power | 4.5 kW |
Continuous shunt external | 2.4 kW |
Peak shunt external | 6 kW |
Weight | 15 lbs (5 kg) |
Operating temperature | 32 to 140°F (0 to 50°C) |
Storage temperature | -40 to 176°F (-40 to 80°C) |
Question: Does Automation Stop offer repairs on the 1398-PDM-030?
Answer: Yes. We offer repairs for the 1398-PDM-030 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1398-PDM-030?
Answer: If you buy the 1398-PDM-030 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1398-PDM-030 online?
Answer: Yes. Automation Stop sells the 1398-PDM-030 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1398-PDM-030?
Answer: The 1398-PDM-030 is made by Allen Bradley - Drives.
Question: What type of product is the 1398-PDM-030?
Answer: The 1398-PDM-030 is part of the Servo Drive 1398 series.
Question: What is the Continuous output current of the Rockwell-Automation 1398-PDM-030?
Answer: The Rockwell-Automation 1398-PDM-030 has a Continuous output current of 15 A.
Question: What is the Continuous power output of the 1398-PDM-030?
Answer: The Continuous power output of the Allen Bradley Automation 1398-PDM-030 is 3 kW.
Question: What is the Continuous shunt external of the 1398-PDM-030?
Answer: The Continuous shunt external of the 1398-PDM-030 is 2.4 kW.
Question: What is the Continuous shunt power of the 1398-PDM-030?
Answer: The Rockwell-Automation 1398-PDM-030 has a Continuous shunt power of 50 W.
Question: What Current rating does the Rockwell Automation 1398-PDM-030 have?
Answer: The 1398-PDM-030 has a Current rating of Single phase 28 Amp.
Question: What is the Line voltage input of the Rockwell Automation 1398-PDM-030?
Answer: The 1398-PDM-030 has a Line voltage input of 100-240 VAC (voltage alternating current) (alternating current) (50/60 Hz).
Question: What is the Maximum power losses of the 1398-PDM-030?
Answer: The Allen Bradley Automation 1398-PDM-030 has a Maximum power losses of 150 + dissipative shunt (W).
Question: What Operating temperature does the 1398-PDM-030 have?
Answer: The Operating temperature of the Allen Bradley 1398-PDM-030 is 32 to 140°F (0 to 50°C).
Question: What is the Peak output current of the Rockwell Automation 1398-PDM-030?
Answer: The Peak output current of the 1398-PDM-030 is 30 A.
Question: What Peak shunt external does the Allen-Bradley 1398-PDM-030 have?
Answer: The Peak shunt external of the Allen-Bradley 1398-PDM-030 is 6 kW.
Question: What is the Peak shunt power of the 1398-PDM-030?
Answer: The Rockwell Automation 1398-PDM-030 has a Peak shunt power of 4.5 kW.
Question: What kind of Product series does the 1398-PDM-030 have?
Answer: The 1398-PDM-030 has Product series ULTRA Plus PDM.
Question: What is the Storage temperature of the 1398-PDM-030?
Answer: The 1398-PDM-030 has a Storage temperature of -40 to 176°F (-40 to 80°C).
Question: What is the Weight of the Allen-Bradley 1398-PDM-030?
Answer: The Weight of the 1398-PDM-030 is 15 lbs (5 kg).
For additional information about 1398-PDM-030 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1398-PDM-030.
Revision Part # | Also Known As | Availability |
---|---|---|
1398-PDM-030/A | 1398-PDM-030 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.