GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20-750-1132D-2R |
Series: | 20 |
Description:
Allen Bradley?s 20-750-1132D-2R is an 11-Series I/O option module designed for PowerFlex 750 devices. It was designed to operate in ATEX atmospheres. The module?s voltage rating is 115 volts AC. This I/O option module has 1 analog input, 1 analog output, 3 digital inputs, and 2 relay outputs. It is compatible with 20-750 ATEX cards and requires a screw torque rated at 0.45 Nm (4.0 lb-in). this product should be used with a shielded cable that does not exceed a length of 30 meters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 20-750-1132D-2R is an I/O option tit for 11-Series I/O modules. The PowerFlex 750 Series I/O option module has a rated voltage of 115 volts AC. It is equipped with three (3) 115-volt AC digital inputs and two (2) relay outputs. The module is also designed with one (1) analog input and (1) analog output. The I/O option module requires a screw torque of 0.45 Nm (4.0 lb-in) for installation.
The 20-750-1132D-2R I/O option module is designed for use with PowerFlex 750 Series for ATEX atmospheres. The module is specifically used with for use with 20-750 ATEX cards. This I/O option module can be used with PowerFlex 753/755, 755TL/755TR, and 755TS drives. This I/O option module is certified using C-TICK, CCC, and KC standards for all applicable directives. Additional accessories of the I/O option module include protective covers for the different input and output ports. The module must be stored and operated in indoor environments free of contamination and corrosive substances. It is recommended to use a shielded cable with the module for CE compliance. The cable length must not exceed 30 meters, or 98.4 feet.
The 20-750-1132D-2R I/O option module is designed for modular arrangement, resulting in easy connections and flexible wiring. It slides into compatible I/O interfaces and drives, making installation, removal, and maintenance much easier. It allows for removable wiring that saves time and reduces costs during installation and troubleshooting. Diagnostics and configurable features allow the I/O option module to be user friendly. It comes with vertical and horizontal mounting options. The I/O option module is available with conformal coating.
Question: Does Automation Stop offer repairs on the 20-750-1132D-2R?
Answer: Yes. We offer repairs for the 20-750-1132D-2R and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20-750-1132D-2R?
Answer: If you buy the 20-750-1132D-2R through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20-750-1132D-2R online?
Answer: Yes. Automation Stop sells the 20-750-1132D-2R online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20-750-1132D-2R?
Answer: The 20-750-1132D-2R is made by Allen Bradley - Drives.
For additional information about 20-750-1132D-2R check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20-750-1132D-2R.
Revision Part # | Also Known As | Availability |
---|---|---|
20-750-1132D-2R/A | 20-750-1132D-2R Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.