GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20-750-DNET |
Series: | 20 |
UPC: | 820919992490 |
Description:
Product number 20-750-DNET is a DeviceNet option module. This module was designed and produced by the company known as Allen Bradley / Rockwell Automation. This module belongs to the PowerFlex series of products. This module was created for the purpose of providing and establishing network communication via the DeviceNet protocol. This module has a power supply voltage rating of 24 volts DC. Additionally, it has a current rating of 60 milliamperes. This module has a vast array of features.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
An Allen Bradley product, the 20-750-DNET is a DeviceNet option module. This module belongs to the PowerFlex series of products. This product was designed to provide network communication via the DeviceNet protocol. This Allen Bradley module has a power supply voltage rated at 24 volts direct current (DC). Additionally, this device has a current rating of 60 milliamperes (mA).
The Allen Bradley 20-750-DNET option module has many features. These features include captive screws with the purpose of securing the 20-750-DNET module to a drive. This device also has switches that are used to set a node address and network data rate. This module is capable of being combined with a human interface module (HIM) for configuration purposes. This module is equipped with status indicators. These indicators report the status of the module, as well as network communication. These status indicators are also visible when the cover of the drive is removed. Another feature of the Allen Bradley 20-750-DNET communication module is that it can utilize multiple data exchange methods to transmit data between itself and the network. These data exchange methods include Change of State (COS), Cyclic, and Polled. This module has access to any drive within the PowerFlex family, as well as its connected devices, on the network that it is connected to. This option module has physical dimensions that measure 68 millimeters x 150 millimeters x 26 millimeters, or 2.7 inches x 5.9 inches x 1.0 inch (height x length x width). The approximate weight of this module is 62 grams, or the equivalent of 2.1 ounces.
Question: Does Automation Stop offer repairs on the 20-750-DNET?
Answer: Yes. We offer repairs for the 20-750-DNET and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20-750-DNET?
Answer: If you buy the 20-750-DNET through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20-750-DNET online?
Answer: Yes. Automation Stop sells the 20-750-DNET online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20-750-DNET?
Answer: The 20-750-DNET is made by Allen Bradley - Drives.
For additional information about 20-750-DNET check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20-750-DNET.
Revision Part # | Also Known As | Availability |
---|---|---|
20-750-DNET/A | 20-750-DNET Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.