GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20-750-ENC-1 |
Series: | 20 |
UPC: | 884951062504 |
Description:
The Allen-Bradley 20-750-ENC-1 is an incremental encoder module. The module assists with both single and double channel operations. It is compatible with PowerFlex 755TR, PowerFlex 755, PowerFlex 753, and PowerFlex 755TL. The 20-750-ENC-1 has a maximum high stage voltage of 0.4 VDC and a minimum voltage of 3.5 VDC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 20-750-ENC-1 is an incremental encoder module from PowerFlex 750 class drives. The module assists with both single and double channel operations. The module is compatible drives PowerFlex 755TR, PowerFlex 755, PowerFlex 753 and PowerFlex 755TL. It is used with PowerFlex 755T drives and installed to ports 4,5,6,7,8 for frame 5-15drives. It is also compatible with PowerFlex 755 drives and installed to ports 4 and 5 for frame A-drive and ports 6 for frame 2-drive or higher-drives. Or, if it used with PowerFlex 753 drives, it may be is installed to ports 4 and 5 for frame 1-drive and ports 4,5,6,7 for frame 2-drive or higher-drives. The Allen-Bradley 20-750-ENC-1 encoder operates with an input voltage of 5-15VDC and has a power of 24V DC. The 20-750-ENC-1 has a maximum high stage voltage of 0.4 VDC and a minimum voltage of 3.5 VDC. The incremental encoder module does not require a wire connection of more than 183 m (600 ft) at 12V and 30 m (100 ft) at 5V. It mostly fits with input devices that have a maximum input frequency of 250 kHz. The 20-750-ENC-1 encoder has a TB1 terminal that has 14-spins. The power supply and voltage can be wired with a TB1 terminal. The encoder module ambient temperature range should be between -40 and 70 degrees Celsius when not in use. It has a maximum cable length of 30 m (100 ft) at 5Volts DC and 30 m (600 ft) at 12Volts DC.
Question: Does Automation Stop offer repairs on the 20-750-ENC-1?
Answer: Yes. We offer repairs for the 20-750-ENC-1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20-750-ENC-1?
Answer: If you buy the 20-750-ENC-1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20-750-ENC-1 online?
Answer: Yes. Automation Stop sells the 20-750-ENC-1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20-750-ENC-1?
Answer: The 20-750-ENC-1 is made by Allen Bradley - Drives.
For additional information about 20-750-ENC-1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20-750-ENC-1.
Revision Part # | Also Known As | Availability |
---|---|---|
20-750-ENC-1/A | 20-750-ENC-1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.