GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-CFBM7DD-CEAA03 |
Series: | 2090 |
Description:
Product number 2090-CFBM7DD-CEAA03 is a feedback cable. It is an accessory that is offered by Allen-Bradley for use as a feedback connecting cable between a motor or actuator and a drive. This cable has a length of 3 meters (9.8 feet). It is a standard non-flexing model and has one 15-pin connector and a SpeedTec connector. The cable is colored green and is made out of TPE. The cable has a 9.8-millimeter (0.38-inch) diameter.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2090-CFBM7DD-CEAA03 is a 3-meter (9.8 foot) -long cable manufactured by Allen-Bradley. It is a motor feedback cable that is part of the Bulletin 2090 power and feedback cable lineup. This unit is a standard non-flexing cable variant that includes pre-installed connectors on both ends. The side of the cable connecting to the drive features a SpeedTec DIN M7 connector. The other end of the cable is connected to the motor or actuator and features a 15-pin D-Sub connector that is designed to be used with high-resolution feedback encoders and resolvers. The cable is constructed out of industrial Thermoplastic elastomers (TPE) and is finished in an industry standard color scheme. The cable color conforms to DESINA standards and is a shade of green that meets RAL 6018 specifications. The wire has a size of 22 American Wire Gauge (AWG) that is supported for use with all conductors. The approximate weight of the cable is approximately 0.136 kilograms per meter, or the equivalent of 0.092 pounds per foot. This cable is rated for transferring power at a maximum voltage of 600 volts. It is UL listed and is classified as a bulk cable with the PLTC-ER type. The length of the connector on the motor end is 147 millimeters, or 5.8 inches. The connector’s diameter measures 28.0 millimeters (1.1 inches). The overall cable diameter is 9.8 millimeters (0.38 inches). The distance between the bend area and the connectors is dependent on the diameter of the cable. For this cable, the non-bend length is 68.6 millimeters (2.7 inches) at both ends.
MPN | 2090-CFBM7DD-CEAA03 |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | Kinetix Motion Accessory |
Product Type | Cable |
Cable Type | Motor feedback only |
Motor-end Connector Type | SpeedTec DIN connector |
Drive-end Connector Type | Drive-end, D-sub connector |
Wire Gauge Size | BLANK |
Encoder Type | SIN/COS High-resolution/Resolver |
Cable Material Type | Standard, non-flex |
Cable Length | 3...90 m 9.9...295 ft |
Question: Does Automation Stop offer repairs on the 2090-CFBM7DD-CEAA03?
Answer: Yes. We offer repairs for the 2090-CFBM7DD-CEAA03 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-CFBM7DD-CEAA03?
Answer: If you buy the 2090-CFBM7DD-CEAA03 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-CFBM7DD-CEAA03 online?
Answer: Yes. Automation Stop sells the 2090-CFBM7DD-CEAA03 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-CFBM7DD-CEAA03?
Answer: The 2090-CFBM7DD-CEAA03 is made by Allen Bradley - Drives.
Question: What is the Cable Length of the 2090-CFBM7DD-CEAA03?
Answer: The Cable Length of the 2090-CFBM7DD-CEAA03 is 3...90 m 9.9...295 ft.
Question: What Cable Material Type is included with the 2090-CFBM7DD-CEAA03?
Answer: The Allen Bradley 2090-CFBM7DD-CEAA03 has a Standard, non-flex Cable Material Type.
Question: What Cable Type is included with the Rockwell-Automation 2090-CFBM7DD-CEAA03?
Answer: The Rockwell-Automation 2090-CFBM7DD-CEAA03 has a Motor feedback only Cable Type.
Question: What Drive-end Connector Type is included with the 2090-CFBM7DD-CEAA03?
Answer: The Rockwell-Automation 2090-CFBM7DD-CEAA03 has a Drive-end, D-sub connector Drive-end Connector Type.
Question: What Encoder Type does the Allen Bradley/Rockwell Automation 2090-CFBM7DD-CEAA03 have?
Answer: The 2090-CFBM7DD-CEAA03 has a SIN/COS High-resolution/Resolver Encoder Type.
Question: What Motor-end Connector Type does the Allen Bradley 2090-CFBM7DD-CEAA03 have?
Answer: The Allen Bradley 2090-CFBM7DD-CEAA03 has a SpeedTec DIN connector Motor-end Connector Type.
Question: What Product Type does the 2090-CFBM7DD-CEAA03 have?
Answer: The Rockwell Automation 2090-CFBM7DD-CEAA03 has a Cable Product Type.
Question: What Wire Gauge Size does the Rockwell-Automation 2090-CFBM7DD-CEAA03 have?
Answer: The Rockwell-Automation 2090-CFBM7DD-CEAA03 has a BLANK Wire Gauge Size.
For additional information about 2090-CFBM7DD-CEAA03 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-CFBM7DD-CEAA03.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-CFBM7DD-CEAA03/A | 2090-CFBM7DD-CEAA03 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.