GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-CFBM7DF-CEAA09 |
Series: | 2090 |
Description:
Allen-Bradley's 2090-CFBM7DF-CEAA05 Motor Feedback Cable has a SpeedTec DIN Connector. It also has a drive end connection, type flying lead, and sin/cos high-resolution/resolver encoder cable configurations. The overall length of the wire is 5 meters (16.4 feet). These cables meet the requirements of the National Fire Protection Association (NFPA), and they are also UL authorized bulk cables with 600 V insulating grades for use in electrical wiring cable trays and outer run situations. Type TC-ER is also available in power-only as well as power-with-brake configurations, as well as a feedback cable designed for higher resolution feedback motors (type PLTC-ER).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley produced the 2090-CFBM7DF-CEAA09 servo feedback cable, which is 9 meters long and part of the MP products series. The 2090-CFBM7DF-CEAA09 features a wide variety of functions and a long-lasting DIN connector for attaching any motion controlling scheme. It comes in a variety of lengths and combinations. Motor power and feedback cables can be used with all Allen-Bradley servo motors and actuators. Continuous-flex cables, which can be used in moving applications, are also usable. Also, standard (non-flex) extension cables and transition cables can be used in places where these cables are needed.
Motor feedback cable 2090-CFBM7DF-CEAA05 has CSA AWM, I/I II A and B construction, six hundred (600) volts, and a ninety (90)-degree Celsius average temperature rating. It has a SpeedTec connection mechanism for quick connections with strong metallic keys. This feedback cable features a DESINA-compliant sleeve to aid in the identification and isolation of cables inside a machine, labeled as orange color for powering, green color for feedback options. This servo feedback cable is suited for twenty million (20,000,000) flex-cycles, and it is also featured in extension cable designs, according to Allen-Bradley made servo system declaration of conformity. By lowering the number of cables needed, comprehensive accessories assist to optimize the usage of cables in machines.
If you need a feedback cable with the CE identification, such as 2090-CFBM7DF-CEAA09, for high-resolution encoder or resolver purposes, this is the cable for you. It contains fewer conductors than CD-designated feedback cables, such as 2090-CFBM7DF-CEAA09, which are used for high-resolution or incremental encoder operations.
MPN | 2090-CFBM7DF-CEAA09 |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | Kinetix Motion Accessory |
Product Type | Cable |
Cable Type | Motor feedback only |
Motor-end Connector Type | SpeedTec DIN connector |
Drive-end Connector Type | Drive-end, flying-leads |
Wire Gauge Size | BLANK |
Encoder Type | SIN/COS High-resolution/Resolver |
Cable Material Type | Standard, non-flex |
Cable Length | 9...90 m 29.7...295 ft |
Question: Does Automation Stop offer repairs on the 2090-CFBM7DF-CEAA09?
Answer: Yes. We offer repairs for the 2090-CFBM7DF-CEAA09 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-CFBM7DF-CEAA09?
Answer: If you buy the 2090-CFBM7DF-CEAA09 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-CFBM7DF-CEAA09 online?
Answer: Yes. Automation Stop sells the 2090-CFBM7DF-CEAA09 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-CFBM7DF-CEAA09?
Answer: The 2090-CFBM7DF-CEAA09 is made by Allen Bradley - Drives.
Question: What is the Cable Length of the Allen-Bradley 2090-CFBM7DF-CEAA09?
Answer: The Cable Length of the 2090-CFBM7DF-CEAA09 is 9...90 m 29.7...295 ft.
Question: What Cable Material Type is included with the 2090-CFBM7DF-CEAA09?
Answer: The 2090-CFBM7DF-CEAA09 has a Standard, non-flex Cable Material Type.
Question: What Cable Type does the 2090-CFBM7DF-CEAA09 have?
Answer: The Allen-Bradley 2090-CFBM7DF-CEAA09 has a Motor feedback only Cable Type.
Question: What Drive-end Connector Type is included with the Allen Bradley/Rockwell Automation 2090-CFBM7DF-CEAA09?
Answer: The 2090-CFBM7DF-CEAA09 has a Drive-end, flying-leads Drive-end Connector Type.
Question: What Encoder Type is included with the 2090-CFBM7DF-CEAA09?
Answer: The Allen Bradley 2090-CFBM7DF-CEAA09 has a SIN/COS High-resolution/Resolver Encoder Type.
Question: What Motor-end Connector Type does the Rockwell-Automation 2090-CFBM7DF-CEAA09 have?
Answer: The 2090-CFBM7DF-CEAA09 has a SpeedTec DIN connector Motor-end Connector Type.
Question: What Product Type is included with the Allen Bradley 2090-CFBM7DF-CEAA09?
Answer: The 2090-CFBM7DF-CEAA09 has a Cable Product Type.
Question: What Wire Gauge Size does the 2090-CFBM7DF-CEAA09 have?
Answer: The 2090-CFBM7DF-CEAA09 has a BLANK Wire Gauge Size.
For additional information about 2090-CFBM7DF-CEAA09 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-CFBM7DF-CEAA09.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-CFBM7DF-CEAA09/A | 2090-CFBM7DF-CEAA09 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.