GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-CFBM7E7-CEAF05 |
Series: | 2090 |
Description:
The Allen-Bradley 2090-CFBM7E7-CEAF05 is one of the motor feedback cables that make up the 2090 series. It is 5 meters in length. This cable is a continuous flex type model. It is intended for motor feedback use only and does not support power transfer. The end connector on the drive side has a SpeedTec ready extension component. The motor end connector has a DIN connector. This cable has a high-resolution sin/cos encoder.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2090-CFBM7E7-CEAF05 is a motor feedback cable. It is part of the 2090 series of motor and actuator cables produced by Allen-Bradley. This cable does not carry power and is used for motor feedback only. It has end connectors on the motor side that support the SpeedTec DIN specifications. The male connector on the drive side features an extension receptacle that is compatible with SpeedTec. Since the cable carries feedback data, it also has a data encoder. The encoder type is a sin/cos resolver that is capable of very high data resolution. The cable is a continuous flex model and has a length of 5 meters (16.4 feet). Other variants of this cable have lengths ranging from one meter to thirty meters in length. The weight of this cable is 0.143 kilogram per meter. For the cable length specified for this variant, the cable’s total weight is 0.715 kilograms. The cable type is a Feedback Industrial TPE, with a jacket color that is Green (DESINA, RAL 6018). The continuous flex cable has a bend radius that is 12 times the cable diameter. For this cable, the bend radius is 124 millimeters (4.9 inches). The continuous flexing area starts after at least 7 cable diameters from each end. The cable diameter is approximately 10.3 millimeters (0.4 inches). The diameter of the connector is 28.0 millimeters (1.1 inches). The length of the connector and the non-flexing portion of the cable is 147 millimeters (5.8 inches) long. Bulkhead adapter kits are compatible with this cable to secure them as they pass through the cabinet.
MPN | 2090-CFBM7E7-CEAF05 |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | Kinetix Motion Accessory |
Product Type | Cable |
Cable Type | Motor feedback only |
Motor-end Connector Type | SpeedTec DIN connector |
Drive-end Connector Type | Extension receptacle (SpeedTec ready) |
Wire Gauge Size | BLANK |
Encoder Type | SIN/COS High-resolution/Resolver |
Cable Material Type | Continuous-flex |
Cable Length | 5...90 m 16.5...295 ft |
Question: Does Automation Stop offer repairs on the 2090-CFBM7E7-CEAF05?
Answer: Yes. We offer repairs for the 2090-CFBM7E7-CEAF05 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-CFBM7E7-CEAF05?
Answer: If you buy the 2090-CFBM7E7-CEAF05 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-CFBM7E7-CEAF05 online?
Answer: Yes. Automation Stop sells the 2090-CFBM7E7-CEAF05 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-CFBM7E7-CEAF05?
Answer: The 2090-CFBM7E7-CEAF05 is made by Allen Bradley - Drives.
Question: What is the Cable Length of the Allen-Bradley 2090-CFBM7E7-CEAF05?
Answer: The Cable Length of the Allen-Bradley 2090-CFBM7E7-CEAF05 is 5...90 m 16.5...295 ft.
Question: What Cable Material Type is included with the Rockwell Automation 2090-CFBM7E7-CEAF05?
Answer: The Rockwell Automation 2090-CFBM7E7-CEAF05 has a Continuous-flex Cable Material Type.
Question: What Cable Type is included with the 2090-CFBM7E7-CEAF05?
Answer: The 2090-CFBM7E7-CEAF05 has a Motor feedback only Cable Type.
Question: What Drive-end Connector Type does the 2090-CFBM7E7-CEAF05 have?
Answer: The Allen Bradley Automation 2090-CFBM7E7-CEAF05 has a Extension receptacle (SpeedTec ready) Drive-end Connector Type.
Question: What Encoder Type does the Allen-Bradley 2090-CFBM7E7-CEAF05 have?
Answer: The Allen-Bradley 2090-CFBM7E7-CEAF05 has a SIN/COS High-resolution/Resolver Encoder Type.
Question: What Motor-end Connector Type does the 2090-CFBM7E7-CEAF05 have?
Answer: The Rockwell-Automation 2090-CFBM7E7-CEAF05 has a SpeedTec DIN connector Motor-end Connector Type.
Question: What Product Type does the 2090-CFBM7E7-CEAF05 have?
Answer: The Allen Bradley Automation 2090-CFBM7E7-CEAF05 has a Cable Product Type.
Question: What Wire Gauge Size is included with the 2090-CFBM7E7-CEAF05?
Answer: The 2090-CFBM7E7-CEAF05 has a BLANK Wire Gauge Size.
For additional information about 2090-CFBM7E7-CEAF05 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-CFBM7E7-CEAF05.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-CFBM7E7-CEAF05/A | 2090-CFBM7E7-CEAF05 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.