GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-CPBM7DF-16AA30 |
Series: | 2090 |
Description:
The Allen-Bradley produced 2090-CPBM7DF-16AA30 of the Kinetix 2090 motion series is a standard non-flex motor power cable with brakes and feedback. This cable has a current rating of 8 amperes, as well as a voltage rating of 600 volts AC (alternating current). This cable is not equipped with a built-in encoder. This cable has a length that measures 30 meters. The bending dimension of this product measures 81.2 millimeters, while the diameter of this cable measures 11.6 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley produced 2090-CPBM7DF-16AA30 of the Kinetix 2090 motion series is a standard non-flex motor power cable with brakes and feedback. It falls under the MP series sub brand and its primary applications lie with servo motors. The cable has a rated current of eight (8) amperes and a rated voltage capacity of six hundred (600) volts AC (alternating current). The cable is not equipped with an encoder. The cable size is defined to be thirty (30) meters long with a size of AWG 16. The cable function is identified as motor power only. This Allen Bradley cable has a continuous bend radius that measures 150 millimeters (5.9 inches), and is critical in applications that require routing the cable in a non-flex way between motor and drive. The bending dimension B for the cable is given by 81.2 millimeters, or the equivalent of 3.2 inches. The diameter of this cable measures 11.6 millimeters, or the equivalent of 0.47 inches.
The 2090-CPBM7DF-16AA30 cable is comprised of four (4) conductors. The cable design provides complete capabilities of power, feedback, and brake conductors. The motor end connector type used with the 2090-CPBM7DF-16AA30 cable is specified as SpeedTec DIN (M7). The SpeedTec connectors enable machine builders with complete and flexible control of their machine cable requirements. Additional features of the cable include power/ brake wires (PB), motor/actuator, and drive-end flying-leads (DF). The motor is designed in adherence to KC standards. The shipping weight of this standard non-flex motor power cable is approximately 1.36 kilograms.
MPN | 2090-CPBM7DF-16AA30 |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | Kinetix Motion Accessory |
Product Type | Cable |
Cable Type | Motor power with brake wires |
Motor-end Connector Type | SpeedTec DIN connector |
Drive-end Connector Type | Drive-end, flying-leads |
Wire Gauge Size | 16 AWG |
Encoder Type | BLANK |
Cable Material Type | Standard, non-flex |
Cable Length | 30...90 m 99...295 ft |
Question: Does Automation Stop offer repairs on the 2090-CPBM7DF-16AA30?
Answer: Yes. We offer repairs for the 2090-CPBM7DF-16AA30 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-CPBM7DF-16AA30?
Answer: If you buy the 2090-CPBM7DF-16AA30 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-CPBM7DF-16AA30 online?
Answer: Yes. Automation Stop sells the 2090-CPBM7DF-16AA30 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-CPBM7DF-16AA30?
Answer: The 2090-CPBM7DF-16AA30 is made by Allen Bradley - Drives.
Question: What is the Cable Length of the 2090-CPBM7DF-16AA30?
Answer: The Cable Length of the Allen Bradley/Rockwell Automation 2090-CPBM7DF-16AA30 is 30...90 m 99...295 ft.
Question: What Cable Material Type does the 2090-CPBM7DF-16AA30 have?
Answer: The 2090-CPBM7DF-16AA30 has a Standard, non-flex Cable Material Type.
Question: What Cable Type is included with the Allen Bradley/Rockwell Automation 2090-CPBM7DF-16AA30?
Answer: The Allen Bradley/Rockwell Automation 2090-CPBM7DF-16AA30 has a Motor power with brake wires Cable Type.
Question: What Drive-end Connector Type is included with the 2090-CPBM7DF-16AA30?
Answer: The 2090-CPBM7DF-16AA30 has a Drive-end, flying-leads Drive-end Connector Type.
Question: What Encoder Type is included with the Rockwell-Automation 2090-CPBM7DF-16AA30?
Answer: The 2090-CPBM7DF-16AA30 has a BLANK Encoder Type.
Question: What Motor-end Connector Type does the Allen Bradley-Rockwell Automation 2090-CPBM7DF-16AA30 have?
Answer: The 2090-CPBM7DF-16AA30 has a SpeedTec DIN connector Motor-end Connector Type.
Question: What Product Type does the 2090-CPBM7DF-16AA30 have?
Answer: The 2090-CPBM7DF-16AA30 has a Cable Product Type.
Question: What Wire Gauge Size does the 2090-CPBM7DF-16AA30 have?
Answer: The Allen Bradley Automation 2090-CPBM7DF-16AA30 has a Wire Gauge Size of 16 AWG.
For additional information about 2090-CPBM7DF-16AA30 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-CPBM7DF-16AA30.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-CPBM7DF-16AA30/A | 2090-CPBM7DF-16AA30 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.