GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-CSWM1DF-14AA05 |
Series: | 2090 |
Description:
The Allen-Bradley 2090-CSWM1DF-14AA05 is an efficient hybrid cable that can be used for power transmission and feedback communication in a control system. The cable has a weight of 0.185 kilograms per meter and has 4 power conductors.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2090-CSWM1DF-14AA05 is a hybrid cable that can be used for transmission applications in a control system. The cable consists of a number of conductors that perform different tasks based on the material properties and cross-section of the wires used to design the conductor. This cable has four power conductors that can be used to connect the driving machine to motors and other electromechanical components of the industrial automation system. The efficient transmission of electrical power by the cable allows the control system to operate in a highly productive manner for long periods of time. A minimum bend radius must be maintained while routing the cables across components in the control system. Cable trays can also be used as support structures to house and fasten the cables.
The Allen-Bradley 2090-CSWM1DF-14AA05 is also equipped with two feedback conductors that perform the function of carrying feedback to the control modules of the system. The electrical feedback carried by these conductors contains pertinent information regarding the vital parameters of the system. The cable has a standard wire sixe of #14 AWG and the reliability offered by its robust design is further accentuated by the robust non-flex material used to manufacture the cable. It weighs 0.185 kilograms per meter and can vary from 1 meter to 50 meters in length. The cable can be used to power a single motor and uses sophisticated SpeedTec end connectors to improve the efficiency of power transmission. It also has a voltage rating of 100 volts and can be used for a variety of industrial applications.
MPN | 2090-CSWM1DF-14AA05 |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | Kinetix Motion Accessory |
Product Type | Cable |
Cable Type | Single motor power only |
Motor-end Connector Type | Single SpeedTec DIN connector |
Drive-end Connector Type | Drive-end, flying-leads |
Wire Gauge Size | 14 AWG |
Encoder Type | BLANK |
Cable Material Type | Standard, non-flex |
Cable Length | 5...90 m 16.5...295 ft |
Question: Does Automation Stop offer repairs on the 2090-CSWM1DF-14AA05?
Answer: Yes. We offer repairs for the 2090-CSWM1DF-14AA05 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-CSWM1DF-14AA05?
Answer: If you buy the 2090-CSWM1DF-14AA05 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-CSWM1DF-14AA05 online?
Answer: Yes. Automation Stop sells the 2090-CSWM1DF-14AA05 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-CSWM1DF-14AA05?
Answer: The 2090-CSWM1DF-14AA05 is made by Allen Bradley - Drives.
Question: What is the Cable Length of the 2090-CSWM1DF-14AA05?
Answer: The Cable Length of the Allen Bradley/Rockwell Automation 2090-CSWM1DF-14AA05 is 5...90 m 16.5...295 ft.
Question: What Cable Material Type is included with the Allen Bradley-Rockwell Automation 2090-CSWM1DF-14AA05?
Answer: The 2090-CSWM1DF-14AA05 has a Standard, non-flex Cable Material Type.
Question: What Cable Type is included with the Rockwell-Automation 2090-CSWM1DF-14AA05?
Answer: The Rockwell-Automation 2090-CSWM1DF-14AA05 has a Single motor power only Cable Type.
Question: What Drive-end Connector Type is included with the Allen Bradley Automation 2090-CSWM1DF-14AA05?
Answer: The 2090-CSWM1DF-14AA05 has a Drive-end, flying-leads Drive-end Connector Type.
Question: What Encoder Type is included with the 2090-CSWM1DF-14AA05?
Answer: The 2090-CSWM1DF-14AA05 has a BLANK Encoder Type.
Question: What Motor-end Connector Type does the 2090-CSWM1DF-14AA05 have?
Answer: The 2090-CSWM1DF-14AA05 has a Single SpeedTec DIN connector Motor-end Connector Type.
Question: What Product Type is included with the 2090-CSWM1DF-14AA05?
Answer: The Allen-Bradley 2090-CSWM1DF-14AA05 has a Cable Product Type.
Question: What Wire Gauge Size does the Allen Bradley/Rockwell Automation 2090-CSWM1DF-14AA05 have?
Answer: The 2090-CSWM1DF-14AA05 has a Wire Gauge Size of 14 AWG.
For additional information about 2090-CSWM1DF-14AA05 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-CSWM1DF-14AA05.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-CSWM1DF-14AA05/A | 2090-CSWM1DF-14AA05 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.