GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-SCEP0-2 |
Series: | 2090 |
Description:
The Allen Bradley 2090-SCEP0-2 is a fiber-optic cable. It is available in two material variations. Users can get this fiber cable in glass or in plastic. One essential part of the fiber cable is the transmission section (point A to B). This cable has a length that measures 0.2 meters, or the equivalent of 7.0 inches. It has a maximum attenuation rating of 2.04 dB. Additionally, when used with a bulkhead connector, the maximum attenuation rating is 5.04 dB.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 2090-SCEP0-2 is a fiber optic cable that can be connected to a bulkhead adapter. After connecting this fiber cable to a Kinetix 7000 drive, you should house the entire installation inside a separate cabinet. If you go with the glass cable variation of this cable, make sure you do not use a bulkhead adapter. If you use a bulkhead adapter with the glass fiber cable, you will encounter significant signal loss. The bulkhead adapters are best suited for establishing plastic-to-plastic cable connections.
For establishing drive-to-drive connection between multi-axis servo drives with the SERCOS interface, users must use cables with a specific length. For instance, for connecting 2093-AM01 or 2093-AM02 drives from the Kinetix 2000 series, users should use a 2090-SCEP0-2 fiber cable with a length of 0.2 meters, or the equivalent of 7.1 inches. Additionally, for connecting 2094-BM03-S, 2094-BM05-S, 2094-BMP5-M, 2094-BM01-M, or 2094-BM02-M from the Kinetix 6000 series, users should also use a 2090-SCEP0-2 fiber cable with the same length as stated before.
The Allen Bradley 2090-SCEP0-2 comes with no jacket. It is ideal for single-axis connections. To avoid serious damage to the integrity of the fiber optic cables, users must always be careful with handling this cable during installation and maintenance. Users should refer to the user manual to get an idea about the bend radius, tensile loads, twisting, squeezing, and pinching of the cable. The 2090-SCEP0-2 fiber optic cable has a maximum attenuation rating of 2.04 dB. Additionally, if this cable is used with a bulkhead connector, the maximum attenuation rating is 5.04 dB.
Question: Does Automation Stop offer repairs on the 2090-SCEP0-2?
Answer: Yes. We offer repairs for the 2090-SCEP0-2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-SCEP0-2?
Answer: If you buy the 2090-SCEP0-2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-SCEP0-2 online?
Answer: Yes. Automation Stop sells the 2090-SCEP0-2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-SCEP0-2?
Answer: The 2090-SCEP0-2 is made by Allen Bradley - Drives.
For additional information about 2090-SCEP0-2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-SCEP0-2.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-SCEP0-2/A | 2090-SCEP0-2 Ser A, Series A, Rev A | Request a Quote |
2090-SCEP0-2/B | 2090-SCEP0-2 Ser B, Series B, Rev B | Request a Quote |
2090-SCEP0-2/C | 2090-SCEP0-2 Ser C, Series C, Rev C | Request a Quote |
2090-SCEP0-2/D | 2090-SCEP0-2 Ser D, Series D, Rev D | Request a Quote |
2090-SCEP0-2/E | 2090-SCEP0-2 Ser E, Series E, Rev E | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.