GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - Drives |
| Product Type: | Drive |
| Part Number: | 2090-SCEP0-3 |
| Series: | 2090 |
Description:
Designed and produced by the company known as Allen Bradley / Rockwell Automation, product number 2090-SCEP0-3 is a fiber optic cable. This cable is made from a plastic material. It has a length that measures approximately 0.3 meters, or 12 inches. This cable has a long term bend radius of 25,4 mm, or 1.0 inch. It also has a maximum tensile load of less than 70 Newtons. The maximum attenuation of this fiber optic cable is 2.06 decibels.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2090-SCEP0-3 was designed and distributed by the company known as Allen Bradley / Rockwell Automation. This product is a fiber optic cable. This module was created as a part of Allen Bradley's Kinetix 2090 series of products. This module was created as an enclosure only. This cable, which is made with a plastic material, has a length that measures approximately one (1) foot, or the equivalent of 0.3 meters. Operators must keep in mind that the optical fibers must be installed with care to ensure that this product functions reliably. The minimum bend radius and bending of the cable must be observed during installation. At all times, cable connections should be protected from damage by operators. If any of these standards are not followed or taken seriously, it may result in irreversible cable damage. Take care to route wires correctly via cabinets and right-angle raceways. Users must install cables in raceways that are free of loops. To minimize excessive stress or twisting, avoid putting the cable in raceways with copper wires. In addition to that, cleaning the fiber optic wire ends and/or transceivers is critical to reducing system attenuation. Dirty fiber optic cables contaminate the transceivers that connect to them. A filthy transceiver, on the other hand, contaminates its mating fiber-optic connection. Aside from that, cleaning fiber optic components can be accomplished in a variety of ways, and prepackaged wipes along with swabs, as well as canned air, are all ideal. For these purposes, always use an optical grade cleaner.
FAQ
Question: Does Automation Stop offer repairs on the 2090-SCEP0-3?
Answer: Yes. We offer repairs for the 2090-SCEP0-3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-SCEP0-3?
Answer: If you buy the 2090-SCEP0-3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-SCEP0-3 online?
Answer: Yes. Automation Stop sells the 2090-SCEP0-3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-SCEP0-3?
Answer: The 2090-SCEP0-3 is made by Allen Bradley - Drives.
Series information for 2090-SCEP0-3
For additional information about 2090-SCEP0-3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-SCEP0-3.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 2090-SCEP0-3/A | 2090-SCEP0-3 Ser A, Series A, Rev A | Request a Quote |
| 2090-SCEP0-3/B | 2090-SCEP0-3 Ser B, Series B, Rev B | Request a Quote |
| 2090-SCEP0-3/C | 2090-SCEP0-3 Ser C, Series C, Rev C | Request a Quote |
| 2090-SCEP0-3/D | 2090-SCEP0-3 Ser D, Series D, Rev D | Request a Quote |
| 2090-SCEP0-3/E | 2090-SCEP0-3 Ser E, Series E, Rev E | Request a Quote |
Common Misspellings:
- 2090-SCEPO-3
- 2090-5CEP0-3
- 2090-5CEPO-3
- 209O-SCEP0-3
- 209O-SCEPO-3
- 209O-5CEP0-3
- 209O-5CEPO-3
- 2O90-SCEP0-3
- 2O90-SCEPO-3
- 2O90-5CEP0-3
- 2O90-5CEPO-3
- 2O9O-SCEP0-3
- 2O9O-SCEPO-3
- 2O9O-5CEP0-3
- 2O9O-5CEPO-3
