GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-UXNFBHF-S09 |
Series: | 2090 |
Description:
The Allen-Bradley 2090-UXNFBHF-S09 is a Feedback Cable. This cable is employed for F and H motors. This device supports a voltage of 300 Volts AC and weighs approximately 1.45 Kilograms (3.2 pounds) while shipping.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2090-UXNFBHF-S09 is a Feedback Cable. This cable is employed for F and H motors. This device supports a voltage of 300 Volts AC. The cable operates at a frequency range from 50 Hertz to 60 Hertz. This device contains a straight bayonet connector and a D-sub connector. The 2090-UXNFBHF-S09 has a black color. The cable is conceived with industrial TPE material. The Allen-Bradley 2090-UXNFBHF-S09 has a length of 9 meters (29.5 feet). This device supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 Hertz to 500 Hertz. This cable can operate at -25 to 60 degrees Celsius (-13 to 140 degrees Fahrenheit) without condensation.
The Allen-Bradley 2090-UXNFBHF-S09 can be stored in a safe environment that should not be full of condensation or corrosion at a temperature from -55 degrees to 80 degrees Celsius (-67 degrees to 176 degrees Fahrenheit). This device can operate at an altitude of up to 1000 meters (3300 feet) without deterioration. The device has an operating specification for the mechanical shock level of 30 g. The unit has also a storage specification for the mechanical shock level of 50 g. This non-flex assembly cable has male pin contacts. The 2090-UXNFBHF-S09 includes connectors at both ends. The assembly cable can be employed with H and F series motors. This cable can operate at -25 degrees to 60 degrees Celsius (-13 degrees to 140 degrees Fahrenheit) for industrial applications. The 2090-UXNFBHF-S09 weighs approximately 1.45 Kilograms (3.2 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | 2090 |
Part Number | 2090-UXNFBHF-S09 |
Description | Motor Feedback Cable |
Voltage Rating | 300 Volts |
Length | 9 meters |
Connector | End bayonet to D connector (drive end) |
Color | Black |
Material | Industrial TPE |
Used with: | H and F series |
Orientation | Straight |
Weight | 1.45 Kilograms (3.2 pounds) |
Question: Does Automation Stop offer repairs on the 2090-UXNFBHF-S09?
Answer: Yes. We offer repairs for the 2090-UXNFBHF-S09 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-UXNFBHF-S09?
Answer: If you buy the 2090-UXNFBHF-S09 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-UXNFBHF-S09 online?
Answer: Yes. Automation Stop sells the 2090-UXNFBHF-S09 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-UXNFBHF-S09?
Answer: The 2090-UXNFBHF-S09 is made by Allen Bradley - Drives.
Question: What Brand is included with the Rockwell-Automation 2090-UXNFBHF-S09?
Answer: The Rockwell-Automation 2090-UXNFBHF-S09 has a Allen Bradley / Rockwell Automation Brand.
Question: What colored is included with the 2090-UXNFBHF-S09?
Answer: The 2090-UXNFBHF-S09 has a Black color.
Question: What Connector does the Allen Bradley/Rockwell Automation 2090-UXNFBHF-S09 have?
Answer: The 2090-UXNFBHF-S09 has a End bayonet to D connector (drive end) Connector.
Question: What Description does the Allen Bradley 2090-UXNFBHF-S09 have?
Answer: The 2090-UXNFBHF-S09 has a Motor Feedback Cable Description.
Question: What is the Length of the Rockwell Automation 2090-UXNFBHF-S09?
Answer: The 2090-UXNFBHF-S09 has a Length of 9 meters.
Question: What Material does the Rockwell-Automation 2090-UXNFBHF-S09 have?
Answer: The 2090-UXNFBHF-S09 has a Industrial TPE Material.
Question: What Orientation does the Allen Bradley-Rockwell Automation 2090-UXNFBHF-S09 have?
Answer: The Allen Bradley-Rockwell Automation 2090-UXNFBHF-S09 has a Straight Orientation.
Question: What part Number does the Rockwell-Automation 2090-UXNFBHF-S09 have?
Answer: The component Number of the 2090-UXNFBHF-S09 is 2090-UXNFBHF-S09.
Question: What Used with: does the 2090-UXNFBHF-S09 have?
Answer: The Allen Bradley/Rockwell Automation 2090-UXNFBHF-S09 has a H and F series Used with:.
Question: What Voltage Rating does the 2090-UXNFBHF-S09 have?
Answer: The Rockwell-Automation 2090-UXNFBHF-S09 has a Voltage Rating of 300 Volts.
Question: What is the Weight of the Rockwell Automation 2090-UXNFBHF-S09?
Answer: The Weight of the 2090-UXNFBHF-S09 is 1.45 Kilograms (3.2 pounds).
For additional information about 2090-UXNFBHF-S09 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-UXNFBHF-S09.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-UXNFBHF-S09/A | 2090-UXNFBHF-S09 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.