GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-UXNFBHF-S15 |
Series: | 2090 |
Description:
Designed and manufactured by Allen Bradley, product number 2090-UXNFBHF-S15 is a feedback cable. More specifically, this is an H and F-series standard feedback cable. This cable is non-flexible. Additionally, this is a straight cable. It has a length that measures approximately fifteen (15) meters. It can carry up to 300 volts. This standard feedback cable is equipped with a connector on both ends. It is made using industrial grade thermoplastic elastomer.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2090-UXNFBHF-S15 is an H and F-series standard feedback cable. Designed and manufactured by Allen Bradley / Rockwell Automation, this feedback cable is non-flexible, meaning that it is not meant for applications whereby there is repetitive motions. It is an MTR feedback cable, which implies it is made of polyvinyl chloride material and insulated with a special kind of formulation that is advanced. The temperature index, as well as the oxygen index, are considered to be a bit higher than those of other cables made of the same polyvinyl chloride material. The feedback cables are transported as coils and unless straightened, they retain the shape. It is easy to install them when they are in their straightened format. This feedback cable has a length of fifteen (15) meters.
The Allen Bradley 2090-UXNFBHF-S15 feedback cable has connectors at both ends. These connectors are SpeedTec DIN connectors, which are designed in such a way as to provide a connection that is one quarter turn, thus ensuring that there is ease in connection, as well as securing, the servo connection. The connectors have a wide range of regulations and codes that they are required to meet. This includes Underwriter Laboratory requirements, NFPA 79 compliant requirements, and much more. The material used for the PVC wire is industrial grade thermoplastic elastomer, whereas the wire is able to bear a voltage rated at 300 volts. The feedback cable is listed with the Underwriter laboratory to the AWM requirements. It also bears the Korean certification mark and, therefore, indicates its compliance with the Korean standards for electrical and electronic devices.
Question: Does Automation Stop offer repairs on the 2090-UXNFBHF-S15?
Answer: Yes. We offer repairs for the 2090-UXNFBHF-S15 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-UXNFBHF-S15?
Answer: If you buy the 2090-UXNFBHF-S15 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-UXNFBHF-S15 online?
Answer: Yes. Automation Stop sells the 2090-UXNFBHF-S15 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-UXNFBHF-S15?
Answer: The 2090-UXNFBHF-S15 is made by Allen Bradley - Drives.
For additional information about 2090-UXNFBHF-S15 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-UXNFBHF-S15.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-UXNFBHF-S15/A | 2090-UXNFBHF-S15 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.