GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-UXNFBMP-S01 |
Series: | 2090 |
UPC: | 662453838649 |
Description:
The Allen-Bradley 2090-UXNFBMP-S01 is a feedback cable. This cable is one meter (3.2 feet) long and has straight connectors on both ends. It is compatible with motors in the MP and 1326AB series. This is a standard, non-flexible cable. It has a pre-molded lead type and is compatible with circular bayonet type connectors. Supported encoder types include M2L/S2L, High-Resolution, and Incremental. The cable has an approximate weight of 0.12 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2090-UXNFBMP-S01 is a pre-molded feedback cable that is compatible with motors in the Kinetix MPL series. This accessory is manufactured by Allen-Bradley and is part of the 2090 series of feedback cables. This feedback cable has a bayonet type connector. It is intended for use in applications where motors from the Kinetix MPL series featuring bayonet connectors were replaced with equivalent units fitted with circular DIN connectors. This cable allows for easy installation of a new type of motor within an existing system without requiring extensive disassembly. The cable has a length of 1 meter (3.2 feet). It has an approximate weight of 0.120 kilograms (1.35 pounds). It features a straight connector at both ends. One end of the cable connects to the servo drive and the other is to be connected to a power/brake transition cable with the catalog number series 2090-CPBM4E2-xxTR. This unit is a standard cable and is a non-flex variant. While the motors that use bayonet connectors have a separate connector for the brake contact, the power/brake cables that feature circular DIN connectors have the brake contacts integrated in the power/brake connector. This cable is compatible with MPL and MPG motors in the MP series, as well as the M2L and S2L motors in the 1326AB Series. The cable is designed to provide feedback data to High Resolution, Incremental, and M2L/S2L type encoders. It offers state of the art noise rejection capability and has a low capacitance design. This cable is compliant with NFPA 79 specifications.
Question: Does Automation Stop offer repairs on the 2090-UXNFBMP-S01?
Answer: Yes. We offer repairs for the 2090-UXNFBMP-S01 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-UXNFBMP-S01?
Answer: If you buy the 2090-UXNFBMP-S01 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-UXNFBMP-S01 online?
Answer: Yes. Automation Stop sells the 2090-UXNFBMP-S01 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-UXNFBMP-S01?
Answer: The 2090-UXNFBMP-S01 is made by Allen Bradley - Drives.
For additional information about 2090-UXNFBMP-S01 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-UXNFBMP-S01.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-UXNFBMP-S01/A | 2090-UXNFBMP-S01 Ser A, Series A, Rev A | Request a Quote |
2090-UXNFBMP-S01/B | 2090-UXNFBMP-S01 Ser B, Series B, Rev B | Request a Quote |
2090-UXNFBMP-S01/C | 2090-UXNFBMP-S01 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.