GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-UXPC-D0903 |
Series: | 2090 |
Description:
The Allen Bradley 2090-UXPC-D0903 is a 9-pin, high-density, D-shell cable. This cable is compatible with drives from the Ultra 3000 and Ultra 5000 series. this cable was manufactured using aluminum polyester material that covers 85 to 100 percent of the cable. This cable has two (2) female connectors on both ends. The voltage rating of this cable is 30 volts at 90 degrees Celsius. The cable diameter measures 6.43 millimeters with a minimum bend radius of 64 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2090-UXPC-D0903 is a 9-pin, high density, D-shell cable with a serial communication interface for connecting personal computers (PCs) to Allen Bradley’s Ultra drives. This device was designed and produced by the company known as Allen Bradley / Rockwell Automation. Designed with a straight cable to 45 degree bend, the 2090-UXPC-D0903 is fitted with DB9 female connectors on both ends. This cable type is designed for EIA/TIA 232 serial interface protocol for data connectivity. Each of the 9 pins has its own designation which include: Pin 1 – Data Carrier Detect input (DCD), Pin 2 – Receiver Data input (RCD), Pin 3 – Transmit Data output (TXD), Pin 4 – Data Terminal Ready output (DTR), Pin 5 – Signal Ground (GND), Pin 6 – Data Set Ready input (DSR), Pin 7 – Request to Send output (RTS), Pin 8 – Clear To Send input (CTS) and Pin 9 as Ring Indicator Input (RI). This cable is manufactured using an aluminum polyester material. This material covers 85 to 100 percent of the cable. The Allen Bradley 2090-UXPC-D0903 cable operates using the RS-232 protocol, which allows data to be transmitted in a unilateral direction on a single data line exploiting the asynchronous communication protocol. This product has a maximum standard slew rate of 30 volts per microsecond, a maximum bit rate of 20 kilobytes per second, and a line impedance that ranges from 3 to 7 ohms. This cable has a diameter of 6.43 millimeters with a minimum bend radius of 64 millimeters. this cable is compatible with Ultra 3000/5000 drives.
Question: Does Automation Stop offer repairs on the 2090-UXPC-D0903?
Answer: Yes. We offer repairs for the 2090-UXPC-D0903 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-UXPC-D0903?
Answer: If you buy the 2090-UXPC-D0903 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-UXPC-D0903 online?
Answer: Yes. Automation Stop sells the 2090-UXPC-D0903 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-UXPC-D0903?
Answer: The 2090-UXPC-D0903 is made by Allen Bradley - Drives.
For additional information about 2090-UXPC-D0903 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-UXPC-D0903.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-UXPC-D0903/A | 2090-UXPC-D0903 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.