GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-XXLF-X330B |
Series: | 2090 |
Description:
Part number 2090-XXLF-X330B is an alternating current (AC) line filter that was designed and produced by Allen Bradley / Rockwell Automation. This device has a voltage rating of 500 volts AC at a frequency range of 50 to 60 hertz. The rated current of this line filter is 30 amperes at 50 degrees Celsius. The rated power loss of this device is 38 watts, and the rated leakage current is 64 milliamperes. This line filter has an approximate weight of 2.7 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 2090-XXLF-X330B should be installed on a bus bar. Before installing this AC line filter, users must scrub the surface using a scrubbing pad. This will help remove any layer of grease, oil, and corrosive element from the surface. Users should not touch the base with bare hands as it can cause further contamination. You can mount either the line interface module or the Kinetix 6000 rail to save space on this AC line filter. More information is available in the user manual of this product.
To install the Allen Bradley 2090-XXLF-X330B, first pick the location where you want to install this module. You can find more information on the servo drive system layout within the product manual. In the next step, place the AC line filter as close to the drive as possible. Then, you need to finalize the dimension for the AC line filter. To improve the overall system performance, users should use the proper high-frequency (HF) bonding technique.
The Allen Bradley 2090-XXLF-X330B has a rated voltage of 500 volts AC at a frequency range of 50 to 60 hertz. This device operates in three (3) phases. At 50 degrees Celsius, this device has a current rating of 30 amperes. This Allen Bradley product has a rated power loss of 38 watts and a leakage current of 64 milliamperes. It has an approximate weight of 2.7 kilograms, or 5.9 pounds. This device has an operating temperature of -25 to +85 degrees Celsius, or the equivalent range of -13 to +185 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 2090-XXLF-X330B?
Answer: Yes. We offer repairs for the 2090-XXLF-X330B and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-XXLF-X330B?
Answer: If you buy the 2090-XXLF-X330B through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-XXLF-X330B online?
Answer: Yes. Automation Stop sells the 2090-XXLF-X330B online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-XXLF-X330B?
Answer: The 2090-XXLF-X330B is made by Allen Bradley - Drives.
Question: What voltage is included with the Allen Bradley - Drives 2090-XXLF-X330B?
Answer: The 2090-XXLF-X330B by Allen Bradley - Drives has a voltage of 500.
Question: What can I expect the amperage included with the 2090-XXLF-X330B to be?
Answer: The 2090-XXLF-X330B includes a amperage of 30.
For additional information about 2090-XXLF-X330B check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-XXLF-X330B.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-XXLF-X330B/A | 2090-XXLF-X330B Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.