GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-XXNPHF-14S09 |
Series: | 2090 |
Description:
The 2090-XXNPMF-14S09 is an Allen-Bradley cable that is 9 meters long. It is a standard, non-flex, universal motor power, H/F Series cable.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
To specifically address the needs of the F-series motors, Allen-Bradley has manufactured a 230 Volt AC, 9-meter long, non-flex, motor power H and F gauge cable. It is a single motor cable that combines the benefits of brake conductors, feedback, and motor power. As it is a non-flex cable, it is accompanied with SpeedTec DIN connectors. It weighs around 1.62 - 1.79 kilograms. The diameter of the cable jacket accounts to about 9.9 millimeters. The DIN connector diameter accounts to about 1.1 inches. The continuous-flex cable options are available in 1-meter increments. These continuous-flex cables can be rolled, twisted, and reverse bended. It has a minimum bend radius of 10 times the typical cable diameter.
The cable’s extraordinary features include thermoplastic elastomer jacket with excellent mechanical and chemical properties, a single-cable technology that is compatible with Kinetix 5500 drives and VP motors, tinned copper braid that delivers 100% coverage with aluminum or polyester tape, SpeedTec DIN connectors that provide machine builders a complete control on the cable needs and gives optimal performance with Kinetix 5500 servo drives and VP servo motors, EMC/EMI performance certification, and low capacitance aimed at maximizing the power density. After all, these cables are included in the Rockwell Automation’s servo system DoC (Declaration of Conformity). Hence, this cable adheres to most standards and certifications.
Weight | 1.62 - 1.79 kgs |
Length | 9 m |
Item | Cable |
UNSPSC | 26121629 |
Family / Style | Kinetix |
Gauge | 14 |
Type | 2090 Series, Non-Flex, Standard |
Conductor Size | 14 AWG |
Connector | 1.1 IN Diameter |
Diameter, Cable Jacket | 9.9 mm |
Jacket Material | Industrial grade TPE (Thermoplastic elastomer) |
Voltage Rating | 600 V |
Motor Series | Threaded DIN Connectors |
Number of Conductors | 4 |
Question: Does Automation Stop offer repairs on the 2090-XXNPHF-14S09?
Answer: Yes. We offer repairs for the 2090-XXNPHF-14S09 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-XXNPHF-14S09?
Answer: If you buy the 2090-XXNPHF-14S09 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-XXNPHF-14S09 online?
Answer: Yes. Automation Stop sells the 2090-XXNPHF-14S09 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-XXNPHF-14S09?
Answer: The 2090-XXNPHF-14S09 is made by Allen Bradley - Drives.
Question: What is the Conductor Size of the 2090-XXNPHF-14S09?
Answer: The Conductor Size of the Allen-Bradley 2090-XXNPHF-14S09 is 14 AWG.
Question: What Connector does the 2090-XXNPHF-14S09 have?
Answer: The Connector of the 2090-XXNPHF-14S09 is 1.1 IN Diameter.
Question: What is the Diameter, Cable Jacket of the 2090-XXNPHF-14S09?
Answer: The Allen-Bradley 2090-XXNPHF-14S09 has a Diameter, Cable Jacket of 9.9 mm.
Question: What Family / Style does the Allen Bradley Automation 2090-XXNPHF-14S09 have?
Answer: The 2090-XXNPHF-14S09 has a Kinetix Family / Style.
Question: What Gauge does the 2090-XXNPHF-14S09 have?
Answer: The Gauge of the 2090-XXNPHF-14S09 is 14.
Question: What Item does the Allen Bradley 2090-XXNPHF-14S09 have?
Answer: The Allen Bradley 2090-XXNPHF-14S09 has a Cable Item.
Question: What Jacket Material does the 2090-XXNPHF-14S09 have?
Answer: The 2090-XXNPHF-14S09 has a Industrial grade TPE (Thermoplastic elastomer) Jacket Material.
Question: What is the Length of the 2090-XXNPHF-14S09?
Answer: The 2090-XXNPHF-14S09 has a Length of 9 m.
Question: What Motor Series are included with the Allen Bradley/Rockwell Automation 2090-XXNPHF-14S09?
Answer: The Allen Bradley/Rockwell Automation 2090-XXNPHF-14S09 includes Threaded DIN Connectors for its Motor Series.
Question: What is the Number of Conductors of the 2090-XXNPHF-14S09?
Answer: The Number of Conductors of the 2090-XXNPHF-14S09 is 4.
Question: What is the UNSPSC of the Allen Bradley-Rockwell Automation 2090-XXNPHF-14S09?
Answer: The 2090-XXNPHF-14S09 has a UNSPSC of 26121629.
Question: What is the Voltage Rating of the Allen Bradley-Rockwell Automation 2090-XXNPHF-14S09?
Answer: The Allen Bradley-Rockwell Automation 2090-XXNPHF-14S09 has a Voltage Rating of 600 V.
Question: What Weight does the Rockwell-Automation 2090-XXNPHF-14S09 have?
Answer: The Rockwell-Automation 2090-XXNPHF-14S09 has a Weight of 1.62 - 1.79 kgs.
For additional information about 2090-XXNPHF-14S09 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-XXNPHF-14S09.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-XXNPHF-14S09/A | 2090-XXNPHF-14S09 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.