Allen-Bradley 2094-BC01-MP5-S

The 2094-BC01-MP5-S is an integrated axis module by Allen-Bradley / Rockwell Automation. It is also referred to as the kinetic 6000 IAM, which comes in A, B and C series. It was created with safe torque off (STO) functionality. It's a multi-axis servo drive with a microcontroller and customizable memory. The corresponding input voltage power requirements include 324 to 528 volts rms, 3-phase, 360 to 480 volts AC nominal, 458 to 747 volts DC. Additionally, its continuous output power to the bus is six (6) kilowatts. Its peak power output is 12 kW, with a 425 volt DC bus overvoltage and a 275 volt DC bus undervoltage. This module's AC input frequency range is 47-63 hertz, and the AC input current (nominal rms) is 10.0 amperes, while the AC input current (max inrush 0-peak) is 11.0 amperes. Furthermore, its internal shunt range at continuous power is 50 watts and the internal shunt range at peak power is 5.6 kilowatts, while its internal shunt resistor is 115 ohms and has an efficiency rate of 97%. Aside from these power ratings, the installation clearance of this module is 50.8 mm (2.0 in.) while it has 198 mm (7.8 in.) minimum enclosure depth. The mounting location of this panel is a power rail. Additionally, if this module is connected with ControlLogix devices, it can offer dynamic drive configuration, where drive parameters can change depending on the state of logic triggers encoded in the user program. This program also allows the drive to function with potentially limit without the need to reconfigure this module locally. As a result, it offer more flexibility to the users. 

The Allen Bradley 2094-BC01-MP5-S integrated axis module has a nominal control power input current of 3 amperes rms at 220/230 volts AC, as well as 6 amperes rms at 110/115 volts AC. This module also has a maximum inrush control power input current rated at 25 amperes from 0 to peak performance. The nominal bus output voltage of this axis module is 650 volts direct current (DC). The Allen Bradley 2094-BC01-MP5-S has a line loss ride through rating of twenty (20) milliseconds. The continuous output current to bus rating of this product is ten (10) amperes, while the intermittent output current to bus rating is 20 amperes. The Allen Bradley 2094-BC01-MP5-S integrated axis module has a bus overvoltage rating of 825 volts DC, as well as a bus undervoltage rating of 275 volts DC. This Allen Bradley product has a shunt on rating of 805 volts DC and a shunt off rating of 755 volts DC. The converter inductance rating of this device is 250 microhenry. Additionally, the converter capacitance rating is 110 microfarad. The maximum bus capacitance rating of this device is 4585 microfarad. The Allen Bradley 2094-BC01-MP5-S integrated axis module has an approximate weight of 4.98 kilograms, or the equivalent of 11.0 pounds. This integrated axis module should be operated within an environment where the temperature ranges from 0 to 50 degrees Celsius. Additionally, it should be stored in an environment where the temperature ranges from -40 to 70 degrees Celsius. Furthermore, the relative humidity rating suitable for this product ranges from 5 to 95 percent non-condensing.