GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2097-R4

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2097-R4
Series: 2097

Description:

Allen Bradley?s 2097-R4 is a Bulletin 2097 shunt resistor. This device has a rated resistance of 40 ohms, a rated power of 80 watts when operating continuously, and has a weight of approximately 0.19 kilograms, or the equivalent of 0.42 pounds. This shunt resistor was designed and manufactured for use in Kinetix 300 Ethernet /IP indexing and Kinetix 350 single-axis Ethernet/IP servo drives. This device operated at a peak power of 3.8 kilowatts and a peak current level of 9.8 amperes.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 2097-R4 is a shunt resistor unit that was designed and produced by Allen Bradley / Rockwell Automation for the Kinetix 300/350 series of servo drives. It offers protection from potentially damaging voltage levels by dissipating the excessive regenerated energy in the drive. Providing 40 ohms of resistance and operating at a maximum continuous power level of 3.8 kilowatts, this device wires directly to the Kinetix 300/350 drive using its 7-pin BC quick-connector terminal block that is connected to the shunt/DC Bus terminal situated at the front side of the servo drive. The positive DC bus (BC-1 or 2) and BC-4 are the terminals that the shunt resistor is connected to. Additionally, the BC connector wiring has a strip length of 7 millimeters and a torque value of 0.5 Newton-meters. Replacement connector sets for the shunt resistor and DC bus header are made available with this unit.

Allen Bradley’s 2097-R4 can operate at 80 watts full load rated power at 77 degrees Fahrenheit if it is vertically mounted on a heatsink measuring 200 millimeters x 200 millimeters x 3 millimeters with side clearances of 12 millimeters and 50 millimeters below and above the device, respectively. It should be noted that this device is capable of reaching 200 degrees Celsius, thus installation in hard-to-reach areas, as well as away from flammable objects, is recommended. Part number 2097-R4 is fitted with 14 AWG 500-millimeter-long flying leads that measure 150 millimeters x 137 millimeters x 110 millimeters. It weighs approximately 0.2 kilograms and has an application duty cycle of 2.10 percent.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2097-R4?

Answer: Yes. We offer repairs for the 2097-R4 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2097-R4?

Answer: If you buy the 2097-R4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2097-R4 online?

Answer: Yes. Automation Stop sells the 2097-R4 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2097-R4?

Answer: The 2097-R4 is made by Allen Bradley - Drives.


Series information for 2097-R4

For additional information about 2097-R4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2097-R4.

Revision Part # Also Known As Availability
2097-R4/A 2097-R4 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2O97-R4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP