GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2097-V33PR1-LM

✓ In Stock

2097-V33PR1-LM Image 1 thumbnail
2097-V33PR1-LM Image 2 thumbnail
2097-V33PR1-LM Image 3 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2097-V33PR1-LM
Series: Kinetix 350

Description:

The Allen Bradley 2097-V33PR1-LM servo drive is a Kinetix 350 series Ethernet/IP servo drive. It may be either a single-phase or a three (3)-phase drive. This 2097-V33PR1-LM Ethernet/IP servo drive accepts single-phase input voltages of 120 or 240 volts, as well as three (3)-phase input voltages of 240 volts. It includes a safe torque-off feature. The AC and DC coil contractors can also be utilized with the 2097-V33PR1-LM Ethernet/IP servo drive.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$8,063.00

Available: 4

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$6,451.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 2097-V33PR1-LM? We can help!

Request a Quote

Key Features:

  • has input voltage of 120/240 volts (ac), 1 or 3 phase
  • utilizes 9.37 x 7.29 x 3.06 in (238 x 185.1 x 12.38 mm) dimensions

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen Bradley’s 2097-V33PR1-LM is a Kinetix 350 series single-axis servo drive. It offers an Ethernet/IP solution for operational with 2.8-ampere (A) rated current and 0.5-kilowatt (kW) rated power. This drive requires 120-volt alternating current (AC) 1-phase inputs. The AC line filter in this module is not incorporated, although filters may be fitted separately (foot mount and side mount). The 2097-V33PR1-LM is a low-cost option for motion control applications with a low axis count. This servo drive often interfaces with the ControlLogix controllers through an IP network. When these two Allen-Bradley devices are combined, they create a cost-effective motion control system with excellent performance and scalability, which are always required in the automation sector.

Internal solid-state motor short-circuits safety is included in the 2097-V33PR1-LM servo drive. It also detects under voltage and overvoltage. "Thermal memory" is used to provide motor overload prevention. As long as control power is provided, this system anticipates motor temperature by monitoring operating circumstances. The dimensions of this Kinetix 350 single-axis Ethernet/IP servo drive are 7.29 inches x 9.37 inches x 2.68 inches. It is recommended to keep a minimum of 25 millimeters (mm) of space on the top and bottom sides of the drive and 3 millimeters (mm) of clearance on the sides to manage airflow and regulate the device's heat dissipation. Isolate power supply wiring and motor power connections from control feedback signaling wires during installation.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2097-V33PR1-LM?

Answer: Yes. We offer repairs for the 2097-V33PR1-LM and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2097-V33PR1-LM?

Answer: If you buy the 2097-V33PR1-LM through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2097-V33PR1-LM online?

Answer: Yes. Automation Stop sells the 2097-V33PR1-LM online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2097-V33PR1-LM?

Answer: The 2097-V33PR1-LM is made by Allen Bradley - Drives.


Question: What type of product is the 2097-V33PR1-LM?

Answer: The 2097-V33PR1-LM is part of the Kinetix 350 series.


Question: What voltage alternating current (VAC) is included with the 2097-V33PR1-LM?

Answer: The 2097-V33PR1-LM has a VAC (voltage alternating current) of 240.


Question: What can I expect the amperage included with the 2097-V33PR1-LM to be?

Answer: The 2097-V33PR1-LM has a amperage of 2.8.


Series information for 2097-V33PR1-LM

For additional information about 2097-V33PR1-LM check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2097-V33PR1-LM.

Revision Part # Also Known As Availability
2097-V33PR1-LM/A 2097-V33PR1-LM Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2097-V33PRI-LM
  • 2O97-V33PR1-LM
  • 2O97-V33PRI-LM

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP