The Allen-Bradley 2097-V34PR3-LM is a single-axis servo drive that belongs to Rockwell Automation’s Series of Kinetix 350 Single-Axis Servo Drives. It was specifically developed to provide scalability for a motion control system by simplifying the integration of the entire control solution on one network. These drives support motion applications with the highest power requirements. The device provides powerful features for larger facilities in need of a device to execute optimal control, monitoring, and additional functions over a variety of connected motors that are essential to the operations that are performed within the particular facility. It is highly versatile and can be used in a variety of industrial environments.

The Allen-Bradley 2097-V34PR3-LM has a power rating of 1 kilowatt that makes it suitable for usage in a variety of operations. It also provides a continuous output current of 2.8 amperes. It requires a nominal input voltage of 480 volts of three-phase alternating current. This is in line with the power settings used in most of the industries. The compact frame of the device is only 9.37 inches long, 7.29 inches wide, and 3.08 inches deep. With its compact design, the servo drive requires less panel space and can be connected easily. It weighs only 3.3 pounds or 1.5 kilograms and provides an excellent cost-to-weight ratio. The drive is designed to connect and operate with the ControlLogix controllers supporting Integrated Motion on the Ethernet/IP network. It should be noted that the drive does not have an integrated alternating current line filter. It is equipped with a safe-torque-off feature.

The 2097-V34PR3-LM is a Kinetix 350 single-axis EtherNet/IP servo drive designed and manufactured by Allen-Bradley. The Kinetix 350 single-axis EtherNet/IP servo drive is designed to provide a solution for applications with output power requirements between 0.4 to 3.0 kilowatts (2 to 12 amperes rms). The 2097-V32PR2-LM operates on three-phase 480 VAC and provides a continuous output current of 5.7 amperes. The drive has a power dissipation of 39 watts and provides and power rating of 1 kilowatt. The drive has a continuous output current, zero to peak, of 2.8 amperes. The drive features a safe torque-off feature. This drive is compatible with the Logix Programmable Automation Controllers (PAC) platform, especially the ControlLogix 1756-L7x and 1756-L7xS controllers, as well as the CompactLogix 5370 controllers. This drive has the added benefit of compatibility with controllers that enable integrated motion via Ethernet I/P. By simplifying connectivity, integrating the 2097-V34PR3-LM with the controller delivers a cost-effective solution. The drive dimensions are 9.37 x 7.29 x 3.08 in. (238 x 185.1 x 78.2 mm) and it weighs around 1.5 kilograms or 3.3 pounds. Operators should install the 2097-V34PR3-LM with a side clearance of 3 mm (0.12 in.) and a top and bottom clearance of 25.0 mm (1.0 in.) to allow for proper airflow.