GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-005 |
Series: | Ultra3000-5000 |
Description:
The Allen-Bradley manufactured 2098-DSD-005 is a servo drive. It belongs to the Ultra 3000 drives series. It has an output current of 7.5 amps, a continuous output current of 2.5 amps, and an input frequency range of 47 to 63 Hz. Additionally, it features a 100-240 Volt RMS (root mean square), one-phase AC input voltage. Additionally, the Ultra3000i indexing drive, as well as the Ultra3000-SE, Ultra3000-DN, and Ultra3000X-DN positioning drives, are suitable for applications demanding simple or complicated motion configurations.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley created 2098-DSD-005 is an Ultra 3000 series servo drive. The measurements of the 2098-DSD-005 are 198.12 mm x 144.27 mm x 72.64 mm. This servo drive module measures its weight roughly 1.8 kilograms. The functional temperature for the 2098-DSD-005 servo drive varies from 0 to 55 degrees Celsius. The temperature range for this kit for storing is -40 and 70 degrees Celsius. This module has a moisture content of 5 to 95 percent, which means that there is no condensation. The Allen-Bradley produced 2098-DSD-005 has a 15 G operational shock rating while it is in operation (3 pulses, 11 milliseconds). This module's non-operational shock rating is 30 G in magnitude (3 pulses, 11 milliseconds). In addition, the 2098-DSD-005 complies with several electromagnetic compatibilities (EMC) requirements. The majority of industrial servo motor implementations employ this only one alternating current operation. The voltage source varies from 100–240 VAC. Further, a band of 47 to 63 Hertz is the range of frequencies it accepts as an input. The nominal input current (AC) of this unit is 5 A (RMS), which is a root mean square value. Aside from that, this servo drive package requires a constant of 2.5 amps output current (0 to peak) and an intermittent output current of 7.5A (0 to peak). Users need to tune the motor with no loads the very first time to avoid the chance of unexpected motor performance. Then restore the load and repeat the tuning method until one has achieved an exact working response.
Question: Does Automation Stop offer repairs on the 2098-DSD-005?
Answer: Yes. We offer repairs for the 2098-DSD-005 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-005?
Answer: If you buy the 2098-DSD-005 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-005 online?
Answer: Yes. Automation Stop sells the 2098-DSD-005 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-005?
Answer: The 2098-DSD-005 is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-005?
Answer: The 2098-DSD-005 is part of the Ultra3000-5000 series.
Question: What amperage is included with the 2098-DSD-005?
Answer: The Allen Bradley - Drives 2098-DSD-005 includes a amperage of 2.5.
Question: What amperage is included with the 2098-DSD-005?
Answer: The 2098-DSD-005 has a amperage of 7.5.
For additional information about 2098-DSD-005 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-005.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-005/A | 2098-DSD-005 Ser A, Series A, Rev A | Request a Quote |
2098-DSD-005/B | 2098-DSD-005 Ser B, Series B, Rev B | Request a Quote |
2098-DSD-005/C | 2098-DSD-005 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.