GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-010X |
Series: | Ultra3000-5000 |
Description:
The 2098-DSD-010X is an Ultra3000 Digital Servo Drive by Allen-Bradley and Rockwell Automation. It has 8 optically isolated 12-24 Volt inputs (active high, current sinking) and 4 optically isolated 12-24 Volt outputs (active high, current sourcing). This hardware has an I/O response time of 100 microseconds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2098-DSD-010X is an Ultra3000 Digital Servo Drive that is manufactured by Allen-Bradley and Rockwell Automation. It has 8 optically isolated inputs (12-24 Volts, active high, current sinking) and 4 optically isolated outputs (12-24 Volts, active high, current sourcing). The 2098-DSD-010X has an AC input voltage of 100-240 Volts (rms), single-phase and an AC input frequency of 47-63 Hertz. Nominal AC input current is 9 Amperes (rms) and maximum inrush (230 Volt AC input) is 100 Amperes (0-Peak). The 2098-DSD-010X has a continuous output current of 5 Amperes (0-Peak), an intermittent output current of 15 Amperes (0-Peak), and a bus capacitance of 1880 μF. Bus overvoltage is 400 Volts DC and the 2098-DSD-010X has an energy absorption capability of 125 Joules for 115 Volt AC input and 51 Joules for 230 Volt AC input. Continuous power output is 0.5 Kilowatts and 1.0 Kilowatts for 115 Volts AC and 230 Volts AC, respectively.
Communication specifications include baud rates of 4 and 8 Megabits, a DeviceNet power consumption (network) of 60 milliamperes, and data rates of 125, 250, and 500 Kilobytes per second (and auto-baud). Messaging capabilities include explicit, polled I/O, change of state, and cyclic messaging. Serial ports for the 2098-DSD-010X include one RS-232/RS-422/RS-485 with baud rates of 1200, 2400, 4800, 9600, 19200, and 38400 baud. Motor feedback specifications include incremental, sine/cosine, intelligent, and absolute encoder types, maximum input frequencies of 100 Kilohertz (sine/cosine input) and 2.5 Megahertz (TTL Input) per channel. Auxiliary feedback specifications include A quad B, step/direction, and CW/CCW input modes. Maximum signal frequency is 2.5 Megahertz and input types are incremental only. Environmental specifications for the 2098-DSD-010X Servo Drive include a weight of 2.1 kilograms (4.6 pounds), a storage temperature that ranges between -40 and 70 degrees Celsius (-40 to 158 degrees Fahrenheit), and an operating temperature between 0 and 55 degrees Celsius (32 to 131 degrees Fahrenheit).
Region of Manufacture* | United States |
Type | Servo Drive |
Brand | Allen-Bradley/Rockwell Automation |
Product Family | Ultra3000 |
Product Type | Digital Servo Drive |
Inputs | 8, Optically Isolated, 12-24 Volts (Current Sinking) |
Outputs | 4, Optically Isolated, 12-24 Volts, Current Sourcing |
I/O Response | 100 microseconds |
Input Voltage (AC) | 100-240 Volts (rms), Single-Phase |
AC Input Frequency | 47-63 Hertz |
AC Input Current, Nominal | 9 Amperes (rms) |
Maximum Inrush (230 Volts AC) | 100 Amperes (0-Peak) |
Continuous Output Current | 5 Amperes (0-Peak) |
Intermittent Output Current | 15 Amperes (0-Peak) |
Bus Capacitance | 1880 μF |
Bus Overvoltage | 400 Volts DC |
Serial Ports | RS-232/RS-422/RS-485 |
Weight | 2.1 kilograms (4.6 pounds) |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 2098-DSD-010X?
Answer: Yes. We offer repairs for the 2098-DSD-010X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-010X?
Answer: If you buy the 2098-DSD-010X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-010X online?
Answer: Yes. Automation Stop sells the 2098-DSD-010X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-010X?
Answer: The 2098-DSD-010X is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-010X?
Answer: The 2098-DSD-010X is part of the Ultra3000-5000 series.
Question: What is the AC (alternating current) Input Current, Nominal of the 2098-DSD-010X?
Answer: The AC (alternating current) Input Current, Nominal of the 2098-DSD-010X is 9 Amperes (rms).
Question: What is the AC (alternating current) Input Frequency of the Allen-Bradley 2098-DSD-010X?
Answer: The alternating current (AC) Input Frequency of the 2098-DSD-010X is 47-63 Hertz.
Question: What Brand is included with the Allen-Bradley 2098-DSD-010X?
Answer: The 2098-DSD-010X has a Allen Bradley/Rockwell Automation Brand.
Question: What is the Bus Capacitance of the 2098-DSD-010X?
Answer: The 2098-DSD-010X has a Bus Capacitance of 1880 μF.
Question: What is the Bus Overvoltage of the 2098-DSD-010X?
Answer: The Bus Overvoltage of the 2098-DSD-010X is 400 Volts direct current (DC).
Question: What is the Continuous Output Current of the 2098-DSD-010X?
Answer: The Continuous Output Current of the 2098-DSD-010X is 5 Amperes (0-Peak).
Question: What input/output Response does the 2098-DSD-010X have?
Answer: The Allen Bradley 2098-DSD-010X has a input/output Response of 100 microseconds.
Question: What is the Input Voltage (AC (alternating current)) of the 2098-DSD-010X?
Answer: The Allen Bradley/Rockwell Automation 2098-DSD-010X has a Input Voltage (alternating current (AC)) of 100-240 Volts (rms), Single-Phase.
Question: What is the Inputs of the 2098-DSD-010X?
Answer: The Inputs of the Allen Bradley Automation 2098-DSD-010X is 8, Optically Isolated, 12-24 Volts (Current Sinking).
Question: What Intermittent Output Current does the Allen Bradley/Rockwell Automation 2098-DSD-010X have?
Answer: The Intermittent Output Current of the Allen Bradley/Rockwell Automation 2098-DSD-010X is 15 Amperes (0-Peak).
Question: What is the Maximum Inrush (230 Volts AC (alternating current)) of the Allen Bradley 2098-DSD-010X?
Answer: The Maximum Inrush (230 Volts AC (alternating current)) of the 2098-DSD-010X is 100 Amperes (0-Peak).
Question: What Outputs does the 2098-DSD-010X have?
Answer: The 2098-DSD-010X has a Outputs of 4, Optically Isolated, 12-24 Volts, Current Sourcing.
Question: What is the Product Family of the 2098-DSD-010X?
Answer: The Allen-Bradley 2098-DSD-010X has a Product Family of Ultra3000.
Question: What Product Type is included with the Allen Bradley Automation 2098-DSD-010X?
Answer: The 2098-DSD-010X has a Digital Servo Drive Product Type.
Question: What Region of Manufacture* is included with the Rockwell-Automation 2098-DSD-010X?
Answer: The 2098-DSD-010X has a United States Region of Manufacture*.
Question: What is the Serial Ports of the Allen Bradley-Rockwell Automation 2098-DSD-010X?
Answer: The Serial Ports of the 2098-DSD-010X is RS-232/RS-422/RS-485.
Question: What is the Weight of the Rockwell-Automation 2098-DSD-010X?
Answer: The 2098-DSD-010X has a Weight of 2.1 kilograms (4.6 pounds).
For additional information about 2098-DSD-010X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-010X.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-010X/A | 2098-DSD-010X Ser A, Series A, Rev A | Request a Quote |
2098-DSD-010X/B | 2098-DSD-010X Ser B, Series B, Rev B | Request a Quote |
2098-DSD-010X/C | 2098-DSD-010X Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.