GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-HV030-DN |
Series: | Ultra3000-5000 |
Description:
The 2098-DSD-HV030-DN is an Allen-Bradley Ultra3000 series servo drive module. The module requires a three-phase input of 230-480 VAC with a nominal input of 460 VAC and a frequency of 47-63 Hz. The continuous output current for the 2098-DSD-HV030-DN is 5.0 amperes. This servo drive is equipped with a DeviceNet interface. The drive comes embedded with one RS-232, one RS-422, and one RS-485 serial communication port. The 2098-DSD-HV030-DN registers a weight of 8.55 kg (18.8 lb).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2098-DSD-HV030-DN is an Allen Bradley servo drive module that is part of the Ultra3000 servo drive series. The module inputs a three phase power input of 230-480 VAC, with an input frequency of 47–63 Hz, and nominal input current of 4 A. It outputs a continuous 3 KW power and a nominal current of 7 A. It comes with an internal resistance of 120 ohms and bus capacitance of 470 μF. The module has shunt on and off at 750 VDC and 800 VDC, and bus over voltage of 810 VDC. The fuse of the module can tolerate the input voltage of up to 460 V and the recommended fuses are LPJ-55P, Class J, and KTR-R-5, Class J. The module comes with 8 Isolated 12 to 24 V digital Inputs and 4 Isolated 12 to 24 V digital outputs, with 1 normally open relay output at 30 VDC maximum. The module is reliable with an I/O response of 100 μ sec and Baud rate of 4 and 8 Megabits with node address of 01-99. The circuit breaker 140M-F8E-C32 is recommended to use with this 2098-DSD-HV100X module. The maximum power loss of this mode is 175, plus added dissipative shunt. The drive comes with the storage and operating temperature of about -40 to 158 ℉ and 32 to 131℉ respectively with relative humidity of 5 to 95%. The module can tolerate up to 15g shock and vibration up to 2.5g at (5-2000 Hz) and the weight of the module is approximately 18.8 lbs.
Question: Does Automation Stop offer repairs on the 2098-DSD-HV030-DN?
Answer: Yes. We offer repairs for the 2098-DSD-HV030-DN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-HV030-DN?
Answer: If you buy the 2098-DSD-HV030-DN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-HV030-DN online?
Answer: Yes. Automation Stop sells the 2098-DSD-HV030-DN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-HV030-DN?
Answer: The 2098-DSD-HV030-DN is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-HV030-DN?
Answer: The 2098-DSD-HV030-DN is part of the Ultra3000-5000 series.
Question: What amperage is included with the Allen Bradley - Drives 2098-DSD-HV030-DN?
Answer: The 2098-DSD-HV030-DN by Allen Bradley - Drives has a amperage of 7.
For additional information about 2098-DSD-HV030-DN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-HV030-DN.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-HV030-DN/A | 2098-DSD-HV030-DN Ser A, Series A, Rev A | Request a Quote |
2098-DSD-HV030-DN/B | 2098-DSD-HV030-DN Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.