GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-HV100X |
Series: | 2098 |
Description:
The 2098-DSD-HV100X is an Ultra3000 Digital Servo Drive that is manufactured by Allen-Bradley. The device is part of the 400V input voltage class and has a continuous output power of 10 kW. The drive also registers a continuous output current of 16.3 A, rms. The 2098-DSD-HV100X requires a three-phase input power of 230-480 VAC and weighs approximately 10.44 kg or 22.96 lb. The servo drive has a peak output current of 32.5 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2098-DSD-HV100X is an Allen Bradley servo drive module. The drive is an Ultra3000 device and is a part of the 2098 drives family, which offers multi-axis integrated motion and easy and independent indexing. The module inputs a three phase 230-480 VAC with input frequency of 50-60 Hz and nominal input current of 14 A rms. It has a continuous output of 10 KW power and a nominal current of 23 A. The drive comes with an internal resistance of 40 ohms and bus capacitance of 705 μF. The module has shunt on and off at 750 VDC and 800 VDC and bus over-voltage of 810 VDC. The fuse of the module can tolerate the input voltage of up to 460 V, and the recommended fuses are KTK-R-20 of class CC and LPJ-17-1/2SP of class J. The module comes with 8 Isolated 12 to 24 VDC digital Inputs and 4 Isolated 12 to 24 VDC digital outputs with 1 normally open relay output at 30 VDC maximum. The module is reliable, with an I/O response of 100 μ sec and Baud rate of 4 and 8 Megabits. The 2098-DSD-HV100X has a node address of 01-99. The circuit breaker 140M-F8E-C32 is recommended to use with this 2098-DSD-HV100X module. The maximum power loss of this mode is 350 and dissipative shunt loss added to it. It comes with the storage and operating temperature of about -40 to 158 ℉ or 32 to 131℉, with relative humidity of 5 to 95%. The module can tolerate up to 15g shock and vibration up to 2.5g at (5-2000 Hz) and the weight of the module is approximately 22.96 lbs.
Question: Does Automation Stop offer repairs on the 2098-DSD-HV100X?
Answer: Yes. We offer repairs for the 2098-DSD-HV100X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-HV100X?
Answer: If you buy the 2098-DSD-HV100X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-HV100X online?
Answer: Yes. Automation Stop sells the 2098-DSD-HV100X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-HV100X?
Answer: The 2098-DSD-HV100X is made by Allen Bradley - Drives.
Question: What amperage is included with the Allen Bradley - Drives 2098-DSD-HV100X?
Answer: The 2098-DSD-HV100X has a amperage of 23.
Question: What amperage does the Allen Bradley - Drives 2098-DSD-HV100X have?
Answer: The 2098-DSD-HV100X by Allen Bradley - Drives has a amperage of 46.
For additional information about 2098-DSD-HV100X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-HV100X.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-HV100X/A | 2098-DSD-HV100X Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.