GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2098-DSD-HV220

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2098-DSD-HV220
Series: Ultra3000-5000

Description:

The 2098-DSD-HV220 is an Ultra3000 servo drive that was manufactured by Allen-Bradley. This is a 460 volt servo drive and has an AC input voltage that ranges from 230 to 480 volts rms with three phases. The AC input frequency is 47 to 63 hertz. The 2098-DSD-HV220 has a bus capacitance of 1880 microfarad and a bus overvoltage of 810 volts DC. The opeorating temperature range is from 0 to 55 degrees Celsius. This device weighs 14.1 kilograms.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 2098-DSD-HV220 is an Allen-Bradley Ultra3000 digital servo drive. This particular servo drive is classified as a four hundred and sixty (460) volt servo drive. The AC (alternating current) input voltage range of the 2098-DSD-HV220 is two hundred and thirty to four hundred and eighty (230 to 480) volts rms with three phases. Also, the frequency of the AC input is forty-seven to sixty-three hertz (47 to 63 Hz). The 2098-DSD-HV220 has multiple main AC input currents. At 460 volts AC rms nominal, the main AC input current is twenty-eight (28) amps. However, at 460 volts AC rms max inrush, the main AC input current is six (6) amps. Additionally, this device has an output current, when operating continuously at 0-peak, of forty-seven amperes (47 A). On the other hand, when this device is operating intermittently, the output current is ninety-four amperes (94 A). The 2098-DSD-HV220 has a bus capacitance rating of 1880 microfarad (μF), as well as a bus overvoltage of 810 volts direct current (DC). This Allen-Bradley product has an internal shunt resistance of twenty (20) ohms, as well as an eight hundred (800) volt DC shunt on rating and a seven hundred and fifty (750) volt DC shunt off rating. The 2098-DSD-HV220 has a max power loss of six hundred (600) watts, plus the dissipative shunt. The operating temperature that is best for this servo drive ranges from 0 to 55 degrees Celsius. Additionally, the storage temperature that is best for this device ranges from -40 to 70 degrees Celsius. The 2098-DSD-HV220 has a weight of approximately 14.1 kg (kilograms).

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2098-DSD-HV220?

Answer: Yes. We offer repairs for the 2098-DSD-HV220 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-HV220?

Answer: If you buy the 2098-DSD-HV220 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2098-DSD-HV220 online?

Answer: Yes. Automation Stop sells the 2098-DSD-HV220 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2098-DSD-HV220?

Answer: The 2098-DSD-HV220 is made by Allen Bradley - Drives.


Question: What type of product is the 2098-DSD-HV220?

Answer: The 2098-DSD-HV220 is part of the Ultra3000-5000 series.


Question: What voltage alternating current (VAC) does the Allen Bradley - Drives 2098-DSD-HV220 have?

Answer: The Allen Bradley - Drives 2098-DSD-HV220 includes a voltage alternating current (VAC) of 460.


Question: What amperage does the 2098-DSD-HV220 have?

Answer: The 2098-DSD-HV220 includes a amperage of 47.


Series information for 2098-DSD-HV220

For additional information about 2098-DSD-HV220 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-HV220.

Revision Part # Also Known As Availability
2098-DSD-HV220/A 2098-DSD-HV220 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2098-DSD-HV22O
  • 2098-D5D-HV220
  • 2098-D5D-HV22O
  • 209B-DSD-HV220
  • 209B-DSD-HV22O
  • 209B-D5D-HV220
  • 209B-D5D-HV22O
  • 2O98-DSD-HV220
  • 2O98-DSD-HV22O
  • 2O98-D5D-HV220
  • 2O98-D5D-HV22O
  • 2O9B-DSD-HV220
  • 2O9B-DSD-HV22O
  • 2O9B-D5D-HV220
  • 2O9B-D5D-HV22O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP