GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-IPD-005 |
Series: | Ultra3000-5000 |
Description:
It is an Allen Bradley intelligent positioning drive from the ultra 3000-5000 series. This drive has analog and digital I/O terminals on its front, and it also has motor power and AC input terminals on its top. The module's digital inputs and outputs get power from the dc source that is rated at 10 to 24v dc. Additionally, this module needs a copper cable for establishing an interface with the controllers.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2098-IPD-005 is part of the Ultra 5000 intelligent positioning drives product line. This module has a single-phase AC input voltage of 100 to 240 volts and a continuous output current of 2.5 amps with a peak current of 7.5 amps. This drive also has a nominal input current of 5 Amps RMS and an AC input frequency of 47 to 63 Hertz. It can absorb 51 joules of energy and produce 0.5 kilowatts of continuous electricity at 230 volts ac. On the front panel, it has 28-pin CN1A and 14-pin CN1B signal interfaces. The manufacturer should include double-row, pluggable, spring-clamp interfaces with 3.5mm separation with the drive. The 15-pin CN2 for motor feedback, 9-pin CN3A for main serial interface, and CN3B for supplemental serial port are all standard high-density D-shell signal interfaces. It comes with one setup handbook that contains all of the users' configuration, operating, and storage information. There's also a screwdriver, and two I/O socket plugs supplied. It also contains a standard clear plastic terminal strip cover. The plastic cover should not be removed since it could be used to provide a physical barrier and protection for the drive when installed on the power terminal strip. Furthermore, because this drive is classified as an IEC controller, it must be housed within an enclosure that conforms with the enclosure's standards. In addition, take advantage of easy module access, adequate cable bend radius, and enough clearance, maintain minimal clearances of 0.5 inches on sides and 2 inches on top and bottom.
Question: Does Automation Stop offer repairs on the 2098-IPD-005?
Answer: Yes. We offer repairs for the 2098-IPD-005 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-IPD-005?
Answer: If you buy the 2098-IPD-005 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-IPD-005 online?
Answer: Yes. Automation Stop sells the 2098-IPD-005 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-IPD-005?
Answer: The 2098-IPD-005 is made by Allen Bradley - Drives.
Question: What type of product is the 2098-IPD-005?
Answer: The 2098-IPD-005 is part of the Ultra3000-5000 series.
Question: What amperage is included with the Allen Bradley - Drives 2098-IPD-005?
Answer: The 2098-IPD-005 has a amperage of 2.5.
Question: What amperage is included with the 2098-IPD-005?
Answer: The 2098-IPD-005 has a amperage of 7.5.
For additional information about 2098-IPD-005 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-IPD-005.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-IPD-005/A | 2098-IPD-005 Ser A, Series A, Rev A | Request a Quote |
2098-IPD-005/B | 2098-IPD-005 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.