GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AB042A0AYNANC0 |
Series: | PowerFlex 70 |
Description:
This Allen-Bradley-made PowerFlex 70 AC drive has a power rating of 15 Horsepower. The 20AB042A0AYNANC0 is part of the PowerFlex series also has an ND output rating of 11 kilowatts This particular PowerFlex 70 AC drive is rated at 42 A and is encased in an IP20 (panel installation) housing. This PowerFlex 70 AC drive runs on 240 VAC three-phase electricity at 50/60Hz. This drive requires a D frame size.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 20AB042A0AYNANC0 belongs to the PowerFlex 70 series drive, created by Allen-Bradley, is a variable frequency drive that has been produced for a good level of digital control of three-phase induction motors in industrial applications that demand high-performance speed and torque control. There is a NEMA Type 1 approved enclosure with flange mounting options, as well as an incorporated dynamic braking mechanism that is both cost-effective and efficient in switching regenerative energy. The drive has a voltage rating of 240 VAC (three-phase) at 50 to 60 Hz, an output current rating of 43 A, and a power rating of 11 kW. It is also available in a variety of other configurations (15 HP). A voltage tolerance of ±10% from 47 to 63 Hz on three input phases, a displacement power factor of 0.92, and a drive efficiency of 97.5% are some of the characteristics of this device. The 20AB042A0AYNANC0 is equipped with overvoltage and undervoltage tripping of 285/138 VAC, as well as a heat-sink thermistor that monitors the temperature of the drive's heat-sink, protecting the drive from overheating. If the drive current exceeds the specified range, an instantaneous fault will occur, and a metal oxide varistor will be installed to protect against transient voltage surges and ground fault trips. In addition, a metal oxide varistor will be set up to secure against ground fault trips and will be instantaneously faulted if the drive current exceeds the specified range. When there is a 15ms power loss, the 20AB042A0AYNANC0 is created to continue operating without any interruption. It offers a logic ride-through time of 2 seconds. If you need a lot of power over a wide range of speeds, the 20AB042A0AYNANC0 drive sends out a sine-coded pulse width modulated signal with a carrier frequency range of 2 to 10 kHz. It can be used for either volt per hertz regulating or sensorless vector controlling. From 0 to 400 Hz, 0 to the rated motor voltage, 115 percent overload for one minute, and 150 % overload for 3 seconds are all options for the drive. It has a 115 percent overload for 60 seconds and a 150 percent overload for three seconds.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 240V AC |
Ph. | 3 |
Amps | 42 |
kW | 11 |
HP | 15 |
Frame | D |
Enclosure | Panel Mount - IP 20, NEMA/UL Type 1 |
Interface Module | Blank Cover |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AB042A0AYNANC0?
Answer: Yes. We offer repairs for the 20AB042A0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AB042A0AYNANC0?
Answer: If you buy the 20AB042A0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AB042A0AYNANC0 online?
Answer: Yes. Automation Stop sells the 20AB042A0AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AB042A0AYNANC0?
Answer: The 20AB042A0AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20AB042A0AYNANC0?
Answer: The 20AB042A0AYNANC0 is part of the PowerFlex 70 series.
Question: What is the amperes of the 20AB042A0AYNANC0?
Answer: The 20AB042A0AYNANC0 has a amperes of 42.
Question: What Control does the Rockwell Automation 20AB042A0AYNANC0 have?
Answer: The 20AB042A0AYNANC0 has a Enhanced Control.
Question: What Enclosure does the Allen Bradley/Rockwell Automation 20AB042A0AYNANC0 have?
Answer: The 20AB042A0AYNANC0 has a Enclosure of panel unit Mount - IP 20, NEMA/UL Type 1.
Question: Does the Allen Bradley/Rockwell Automation 20AB042A0AYNANC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame does the Rockwell-Automation 20AB042A0AYNANC0 have?
Answer: The Rockwell-Automation 20AB042A0AYNANC0 has a D Frame.
Question: What is the HP of the 20AB042A0AYNANC0?
Answer: The HP of the Allen Bradley Automation 20AB042A0AYNANC0 is 15.
Question: What Interface Module is included with the 20AB042A0AYNANC0?
Answer: The 20AB042A0AYNANC0 has a Blank Cover Interface Module.
Question: What kW does the 20AB042A0AYNANC0 have?
Answer: The kW of the Allen-Bradley 20AB042A0AYNANC0 is 11.
Question: Does the Allen Bradley/Rockwell Automation 20AB042A0AYNANC0 have a Network Type?
Answer: None.
Question: What Ph. does the 20AB042A0AYNANC0 have?
Answer: The Ph. of the 20AB042A0AYNANC0 is 3.
Question: What Rating is included with the Allen Bradley 20AB042A0AYNANC0?
Answer: The Allen Bradley 20AB042A0AYNANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What is the Voltage of the 20AB042A0AYNANC0?
Answer: The Allen-Bradley 20AB042A0AYNANC0 has a Voltage of 240 volts AC (alternating current).
For additional information about 20AB042A0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AB042A0AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AB042A0AYNANC0/A | 20AB042A0AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.