GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD022A0AYNANC0 |
Series: | PowerFlex 70 |
Description:
The adjustable frequency AC drive 20AD022A0AYNANC0 is from Allen-Bradley PowerFlex 70 series. It has a voltage rating of 480 Volts AC with three-phase and output frequency range of 0 to 500 Hertz.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The PowerFlex 70 series adjustable frequency AC drive 20AD022A0AYNANC0 has a voltage rating of 480 Volts AC with three-phase (six pulse) operation which gives it an Ampere rating of 22 and power rating of 11 kW or 15 hp. The drive has D frame and enclosure is rated for IP20 or NEMA/UL Type 1 panel mount with an operating temperature range of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit). This model does not have a built-in HIM such as a keypad or LCD screen. It is equipped with an IGBT brake and no internal brake resistor. The drive has no communication slot and enhanced control with no feedback. The drive has a sensorless vector control and volts per hertz control along with vector control with FORCE Technology designed to work with or without an encoder. This can be implemented for open loop, closed loop and precision torque and speed regulation purposes. The output frequency range is 0 to 500 Hertz and overload capacity for normal duty application is 110% for 60 seconds and 150% for 3 seconds. This increases to 150% for 60 seconds and 200% for 3 seconds for heavy duty applications. The drive has two analog inputs (one bipolar voltage or current and one unipolar voltage or current), one analog output (unipolar voltage or current), one PTC input, six digital inputs (24 Volts DC or 115 Volts AC) and two form C relay outputs. The drive has certification for ABS, c-UL-us, CE, EAC, IEC, KCC, and RoHS.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 22 |
kW | 11 |
HP | 15 |
Frame | D |
Enclosure | Panel Mount - IP 20, NEMA/UL Type 1 |
Interface Module | Blank Cover |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD022A0AYNANC0?
Answer: Yes. We offer repairs for the 20AD022A0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD022A0AYNANC0?
Answer: If you buy the 20AD022A0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD022A0AYNANC0 online?
Answer: Yes. Automation Stop sells the 20AD022A0AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD022A0AYNANC0?
Answer: The 20AD022A0AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20AD022A0AYNANC0?
Answer: The 20AD022A0AYNANC0 is part of the PowerFlex 70 series.
Question: What amperes does the Allen Bradley 20AD022A0AYNANC0 have?
Answer: The Allen Bradley 20AD022A0AYNANC0 has a amperes of 22.
Question: What Control is included with the Allen Bradley-Rockwell Automation 20AD022A0AYNANC0?
Answer: The Allen Bradley-Rockwell Automation 20AD022A0AYNANC0 has a Enhanced Control.
Question: What is the Enclosure of the 20AD022A0AYNANC0?
Answer: The Rockwell-Automation 20AD022A0AYNANC0 has a Enclosure of panel Mount - IP 20, NEMA/UL Type 1.
Question: Does the 20AD022A0AYNANC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame is included with the 20AD022A0AYNANC0?
Answer: The 20AD022A0AYNANC0 has a D Frame.
Question: What is the HP of the 20AD022A0AYNANC0?
Answer: The HP of the 20AD022A0AYNANC0 is 15.
Question: What Interface Module is included with the Allen Bradley-Rockwell Automation 20AD022A0AYNANC0?
Answer: The Allen Bradley-Rockwell Automation 20AD022A0AYNANC0 has a Blank Cover Interface Module.
Question: What kW does the Rockwell Automation 20AD022A0AYNANC0 have?
Answer: The 20AD022A0AYNANC0 has a kW of 11.
Question: Does the Rockwell-Automation 20AD022A0AYNANC0 have a Network Type?
Answer: None.
Question: What Ph. does the Allen Bradley 20AD022A0AYNANC0 have?
Answer: The Ph. of the Allen Bradley 20AD022A0AYNANC0 is 3.
Question: What Rating is included with the Rockwell Automation 20AD022A0AYNANC0?
Answer: The 20AD022A0AYNANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What Voltage does the 20AD022A0AYNANC0 have?
Answer: The 20AD022A0AYNANC0 has a Voltage of 480 volts AC (alternating current).
For additional information about 20AD022A0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD022A0AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD022A0AYNANC0/A | 20AD022A0AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.