GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD022F3AYNANC0 |
Series: | PowerFlex 70 |
Description:
This is the 20AD022F3AYNANC0 AC drive made by Allen-Bradley which is included in the PowerFlex 70 series. The drive is rated for operation at 480 Volts AC and uses a 3 phase power supply. The drive draws 22 Amperes of input current and operates at a frequency of 60 Hertz. Output power is rated at up to 11 Kilowatts (15 Horsepower). The drive has an integrated Full Numeric LCD and offers enhanced control features.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 20AD022F3AYNANC0 PoweFlex 70 series drive is a 3 phase (6 pulse) AC drive. It operates at a voltage of 480 Volts AC and requires 22 Amperes of current under normal operating conditions with an input frequency of 60 Hertz. The drive is able to generate power rated at up to 11 Kilowatts (15 Horsepower). This drive is Flange mounted and is compatible with D type frames. It offers a Human Interface Module containing a Full Numeric LCD to allow the user to control the drive and view the drive’s operational status. An internal Brake Insulated Gate Bipolar Transistor (IGBT) is provided, however, it does not come equipped with an internal brake resistor. This PowerFlex 70 series drive offers enhanced control features to adjust the drive parameters, but does not provide feedback indications. The drive is not equipped with a Safe Torque-Off feature. It is built to comply with emissions standards and is filtered to reduce emissions. The drive has an operational temperature range between 0 degrees and 50 degrees Celsius (32 degrees and 122 degrees Fahrenheit). The minimum mounting clearance requirement for this drive is at least 76.2 millimeters (3.0 inches) from the drive to the closest object that can impede airflow through the drive chassis and heat sink. An integrated communications slot for connectivity is not provided with this drive model. The 20AD022F3AYNANC0 has approximate dimensions of 248.4 x 350.0 x 178.6 millimeters (9.78 x 13.78 x 7.03 inches). The drive’s approximate weight including the Human Interface Module is 9.25 Kilograms (20.4 pounds).
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 22 |
kW | 11 |
HP | 15 |
Frame | D |
Enclosure | Flange Mount - Front Chassis = IP 20, NEMA/UL Type 1, Rear Heatsink = IP66, NEMA/UL Type 4X/12 for indoor/outdoor use |
Interface Module | Full Numeric LCD |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD022F3AYNANC0?
Answer: Yes. We offer repairs for the 20AD022F3AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD022F3AYNANC0?
Answer: If you buy the 20AD022F3AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD022F3AYNANC0 online?
Answer: Yes. Automation Stop sells the 20AD022F3AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD022F3AYNANC0?
Answer: The 20AD022F3AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20AD022F3AYNANC0?
Answer: The 20AD022F3AYNANC0 is part of the PowerFlex 70 series.
Question: What amperes does the 20AD022F3AYNANC0 have?
Answer: The amperes of the 20AD022F3AYNANC0 is 22.
Question: What Control does the Allen Bradley/Rockwell Automation 20AD022F3AYNANC0 have?
Answer: The 20AD022F3AYNANC0 has a Enhanced Control.
Question: What is the Enclosure of the 20AD022F3AYNANC0?
Answer: The 20AD022F3AYNANC0 has a Enclosure of Flange Mount - Front Chassis = IP 20, NEMA/UL Type 1, Rear Heatsink = IP66, NEMA/UL Type 4X/12 for indoor/outdoor use.
Question: Does the Allen Bradley Automation 20AD022F3AYNANC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame does the 20AD022F3AYNANC0 have?
Answer: The 20AD022F3AYNANC0 has a D Frame.
Question: What is the HP of the 20AD022F3AYNANC0?
Answer: The HP of the Allen-Bradley 20AD022F3AYNANC0 is 15.
Question: What Interface Module does the Allen Bradley-Rockwell Automation 20AD022F3AYNANC0 have?
Answer: The Allen Bradley-Rockwell Automation 20AD022F3AYNANC0 has a Full Numeric LCD Interface Module.
Question: What is the kW of the 20AD022F3AYNANC0?
Answer: The 20AD022F3AYNANC0 has a kW of 11.
Question: Does the Rockwell Automation 20AD022F3AYNANC0 have a Network Type?
Answer: None.
Question: What is the Ph. of the Allen Bradley 20AD022F3AYNANC0?
Answer: The Allen Bradley 20AD022F3AYNANC0 has a Ph. of 3.
Question: What Rating is included with the 20AD022F3AYNANC0?
Answer: The 20AD022F3AYNANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What is the Voltage of the 20AD022F3AYNANC0?
Answer: The Allen Bradley Automation 20AD022F3AYNANC0 has a Voltage of 480 volts alternating current (AC).
For additional information about 20AD022F3AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD022F3AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD022F3AYNANC0/A | 20AD022F3AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.