GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD065F0AYNANC0 |
Series: | PowerFlex 70 |
Description:
This Allen Bradley PowerFlex 70 drive is rated at 50 Hp. In addition, this adjustable frequency drive is a 65 amp AC drive. The drive's power is rated at 37 kilowatts. It has a more advanced control option. This AC drive is a 480 VAC, 3 phase drive with a blank cover instead of an interface module and an E frame size. The IGBT brake is equipped on the drive but it's not inclusive of a drive mounted brake resistor.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 20AD065F0AYNANC0 is an Allen-Bradley operational drive from the AB PF 70 alternating current drive group. 480 volts alternating current is the voltage of input on this drive, along with rated Hp at 3, with a current rating of 22 amperes. This drive has a standard duty horsepower rating of 50 Hp and a heavy-load Horsepower rating of roughly 40 Hp. It has a conformal coating and is enclosed in an enclosure that is rated IP20, NEMA Type 1, and mounted by flanged. It is equipped with an IGBT brake but does not have a drive-mounted brake resistor. The Allen-Bradley PowerFlex 70 AC line of drives includes This drive, the line of drives is inclusive of a dense package of energy, control, and user interface.
They're designed to meet a variety of needs, including convenience, accessibility, space, and dependability. The strong drives in this product series include a wide range of capabilities that make configuration and integration simple for users. For architectural, industrial, and other application purposes, they are the most efficient. They should not, however, be put in areas where the ambient atmosphere contains corrosive or volatile gases, dust clouds, or vapors. If you won't be installing them for a while, keep them in a safe place. These drives also have a non-condensing relative humidity rating of 5-95 percent. The module comes as a size D Frame, is a three-phased AC drive, furthermore, it's manual with better control. Although this drive supports the Base Plus options method, it lacks a HI and internal communications module.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 65 |
kW | 37 |
HP | 50 |
Frame | E |
Enclosure | Flange Mount - Front Chassis = IP 20, NEMA/UL Type 1, Rear Heatsink = IP66, NEMA/UL Type 4X/12 for indoor/outdoor use |
Interface Module | Blank Cover |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD065F0AYNANC0?
Answer: Yes. We offer repairs for the 20AD065F0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD065F0AYNANC0?
Answer: If you buy the 20AD065F0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD065F0AYNANC0 online?
Answer: Yes. Automation Stop sells the 20AD065F0AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD065F0AYNANC0?
Answer: The 20AD065F0AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20AD065F0AYNANC0?
Answer: The 20AD065F0AYNANC0 is part of the PowerFlex 70 series.
Question: What is the amperes of the Rockwell-Automation 20AD065F0AYNANC0?
Answer: The Rockwell-Automation 20AD065F0AYNANC0 has a amperes of 65.
Question: What Control does the Rockwell-Automation 20AD065F0AYNANC0 have?
Answer: The Rockwell-Automation 20AD065F0AYNANC0 has a Enhanced Control.
Question: What Enclosure does the 20AD065F0AYNANC0 have?
Answer: The Enclosure of the 20AD065F0AYNANC0 is Flange Mount - Front Chassis = IP 20, NEMA/UL Type 1, Rear Heatsink = IP66, NEMA/UL Type 4X/12 for indoor/outdoor use.
Question: Does the Allen Bradley Automation 20AD065F0AYNANC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame is included with the Rockwell-Automation 20AD065F0AYNANC0?
Answer: The Rockwell-Automation 20AD065F0AYNANC0 has a E Frame.
Question: What HP does the Rockwell-Automation 20AD065F0AYNANC0 have?
Answer: The 20AD065F0AYNANC0 has a HP of 50.
Question: What Interface Module is included with the 20AD065F0AYNANC0?
Answer: The 20AD065F0AYNANC0 has a Blank Cover Interface Module.
Question: What is the kW of the 20AD065F0AYNANC0?
Answer: The kW of the 20AD065F0AYNANC0 is 37.
Question: Does the Allen Bradley/Rockwell Automation 20AD065F0AYNANC0 have a Network Type?
Answer: None.
Question: What Ph. does the 20AD065F0AYNANC0 have?
Answer: The 20AD065F0AYNANC0 has a Ph. of 3.
Question: What Rating is included with the 20AD065F0AYNANC0?
Answer: The Allen Bradley Automation 20AD065F0AYNANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What Voltage does the Allen Bradley 20AD065F0AYNANC0 have?
Answer: The Voltage of the Allen Bradley 20AD065F0AYNANC0 is 480 volts AC (alternating current).
For additional information about 20AD065F0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD065F0AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD065F0AYNANC0/A | 20AD065F0AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.