GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD2P1A3AYNACG0 |
Series: | 20AD |
Description:
The 20AD2P1A3AYNACG0 drive has a Frame A size, 480 volts alternating current operating voltage, a current rating of 2.1 amperes, and a 0.75 kW output power rating, which is equivalent to 1 horsepower. This Allen-Bradley drive also has a liquid crystal display (LCD) screen, that is a complete numeric interface module for showing module parameters and inputting data and information. In addition to that, it consists of an enclosure rated IP20, protected by type one NEMA/ UL which is mounted on the panel.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 20AD2P1A3AYNACG0 drive consists of a Frame A size, a four hundred and eighty (480)-volt alternating current (AC) operating voltage, and a current rating of two-point-one (2.1) amperes, as well as an output power rating of zero-point-seven-five (0.75) kilowatts (kW), which translates to one (1) horsepower. The drive also comes with a liquid crystal display (LCD), which is a full numeric interface module for displaying module parameters and entering data and information. This 3-phase module comes with an enclosure rated IP20, protected by type one National Electrical Manufacturers Association (NEMA) / UL, which is mounted on the panel. Many of the PowerFlex 70 set of drives have optionally filtered A and B frames, as well as normal C, D, E frames which have filters with them. The handbook for this adjustable frequency drive is included with the drive, as well as the insulated-gate bipolar transistor brake option, but it has no brake resistor integrated within. The slot of either the Coax communication or the ControlNet is also a part of the specifications of this drive. It helps the module interact or link with other modules. The torque off input or output option is also available on the module, along with an improved and better control. However, this drive cannot be regarded as either CE or EMC certified until or unless the encoder interface option is installed. Green and yellow, as well as red, drive status indicator lights which help operators identify the status of the operating module are also included.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 2.1 |
kW | 0.75 |
HP | 1 |
Frame | A |
Enclosure | Panel Mount - IP 20, NEMA/UL Type 1 |
Interface Module | Full Numeric LCD |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | ControlNet (Coax) |
Control | Enhanced |
Safe-Off | Yes |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD2P1A3AYNACG0?
Answer: Yes. We offer repairs for the 20AD2P1A3AYNACG0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD2P1A3AYNACG0?
Answer: If you buy the 20AD2P1A3AYNACG0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD2P1A3AYNACG0 online?
Answer: Yes. Automation Stop sells the 20AD2P1A3AYNACG0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD2P1A3AYNACG0?
Answer: The 20AD2P1A3AYNACG0 is made by Allen Bradley - Drives.
Question: What amperes does the Allen Bradley-Rockwell Automation 20AD2P1A3AYNACG0 have?
Answer: The amperes of the Allen Bradley-Rockwell Automation 20AD2P1A3AYNACG0 is 2.1.
Question: What Control does the Allen-Bradley 20AD2P1A3AYNACG0 have?
Answer: The Allen-Bradley 20AD2P1A3AYNACG0 has a Enhanced Control.
Question: What Enclosure does the 20AD2P1A3AYNACG0 have?
Answer: The Enclosure of the 20AD2P1A3AYNACG0 is panel unit Mount - IP 20, NEMA/UL Type 1.
Question: Does the Allen-Bradley 20AD2P1A3AYNACG0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame does the Allen-Bradley 20AD2P1A3AYNACG0 have?
Answer: The 20AD2P1A3AYNACG0 has a A Frame.
Question: What is the HP of the 20AD2P1A3AYNACG0?
Answer: The HP of the 20AD2P1A3AYNACG0 is 1.
Question: What Interface Module is included with the Rockwell-Automation 20AD2P1A3AYNACG0?
Answer: The Rockwell-Automation 20AD2P1A3AYNACG0 has a Full Numeric LCD Interface Module.
Question: What kW does the 20AD2P1A3AYNACG0 have?
Answer: The kW of the 20AD2P1A3AYNACG0 is 0.75.
Question: What Network Type is included with the Allen-Bradley 20AD2P1A3AYNACG0?
Answer: The Allen-Bradley 20AD2P1A3AYNACG0 has a ControlNet (Coax) Network Type.
Question: What is the Ph. of the Rockwell Automation 20AD2P1A3AYNACG0?
Answer: The Rockwell Automation 20AD2P1A3AYNACG0 has a Ph. of 3.
Question: What Rating is included with the Allen-Bradley 20AD2P1A3AYNACG0?
Answer: The Allen-Bradley 20AD2P1A3AYNACG0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What is the Voltage of the 20AD2P1A3AYNACG0?
Answer: The Rockwell Automation 20AD2P1A3AYNACG0 has a Voltage of 480 volts AC (alternating current).
For additional information about 20AD2P1A3AYNACG0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD2P1A3AYNACG0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD2P1A3AYNACG0/A | 20AD2P1A3AYNACG0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.