GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

20AD2P1A3AYNNDNN

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 20AD2P1A3AYNNDNN
Series: PowerFlex 70

Description:

The Allen-Bradley 20AD2P1A3AYNNDNN is an adjustable frequency AC drive that belongs to the PoweFlex 70 series of products. This drive has a voltage rating of 480 volts and features a built-in LCD interface module. The drive has a rated power output of 0.75 kilowatts, or 1 horsepower. It has an NEMA Type 1 enclosure rated at IP20 and is built to be compatible with A sized frames. It includes a DeviceNet port for communication.


Key Features:

  • operates at 2.1 amps
  • includes a a frame type
  • ships with standard control
  • ships with the full numeric lcd interface module
  • ships with 0.75 (1.0) of kw(hp)
  • ships with devicenet network type
  • ships with 3 ph
  • ships with not filtered a & b frames (optional) c, d & e frames rating
  • ships with manual
  • has Brake: yes
  • provides resistor: no

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Product number 20AD2P1A3AYNNDNN is a PowerFlex 70 series drive. More specifically, this is an adjustable frequency AC drive that was manufactured by Allen-Bradley. This unit operates at 480 volts AC using a three-phase power supply. It comes with a built-in full numeric LCD Human Interface Module. The HIM offers multilingual text and can be used to adjust drive parameters, monitor operation, and perform troubleshooting. The drive has an A sized frame that is mounted on a panel. It includes a built-in brake isolated gate bipolar transistor (IGBT) but does not include an internal brake resistor. This drive is able to handle motors rated at up to 0.75 kilowatts, or the equivalent of 1 horsepower (Hp). It has a current rating of 2.1 amperes. This unit is not filtered for emissions. Available connectivity features include an integrated port that can be used to connect to DeviceNet networks. This drive does not include enhanced control features and only offers manufacturer standard control operation. No feedback data is provided by the drive, and it does not include a built-in Safe Off feature. Safety features include over voltage and under voltage protection, as well as over temperature and short circuit tripping. The drive is housed in a NEMA/UL Type 1 enclosure that has an Ingress Protection rating of IP20 against contamination from the operating environment. The approximate weight of this drive is 2.71 kilograms (6.0 pounds), including standard I/O and the interface module. The approximate dimensions of this drive are 122.4 millimeters x 225.7 millimeters x 179.8 millimeters, or 4.82 inches x 8.89 inches x 7.08 inches.

Technical Specifications

Manufacturer Allen Bradley/Rockwell Automation
Series PowerFlex 70 Adjustable Frequency AC Drives
Voltage 480V AC
Ph. 3
Amps 2.1
kW 0.75
HP 1
Frame A
Enclosure Panel Mount - IP 20, NEMA/UL Type 1
Interface Module Full Numeric LCD
Type Manual
w/Brake IGBT Yes
w/Resistor No
Rating Not Filtered A & B Frames (Optional) C, D & E Frames
Network Type DeviceNet
Control Standard
Safe-Off N/A
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 20AD2P1A3AYNNDNN?

Answer: Yes. We offer repairs for the 20AD2P1A3AYNNDNN and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 20AD2P1A3AYNNDNN?

Answer: If you buy the 20AD2P1A3AYNNDNN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 20AD2P1A3AYNNDNN online?

Answer: Yes. Automation Stop sells the 20AD2P1A3AYNNDNN online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 20AD2P1A3AYNNDNN?

Answer: The 20AD2P1A3AYNNDNN is made by Allen Bradley - Drives.


Question: What type of product is the 20AD2P1A3AYNNDNN?

Answer: The 20AD2P1A3AYNNDNN is part of the PowerFlex 70 series.


Question: What is the amperes of the 20AD2P1A3AYNNDNN?

Answer: The amperes of the 20AD2P1A3AYNNDNN is 2.1.


Question: What Control does the Allen-Bradley 20AD2P1A3AYNNDNN have?

Answer: The Allen-Bradley 20AD2P1A3AYNNDNN has a Standard Control.


Question: What Enclosure does the 20AD2P1A3AYNNDNN have?

Answer: The Allen Bradley Automation 20AD2P1A3AYNNDNN has a Enclosure of panel component Mount - IP 20, NEMA/UL Type 1.


Question: What Frame is included with the Allen Bradley Automation 20AD2P1A3AYNNDNN?

Answer: The 20AD2P1A3AYNNDNN has a A Frame.


Question: What is the HP of the 20AD2P1A3AYNNDNN?

Answer: The Allen Bradley/Rockwell Automation 20AD2P1A3AYNNDNN has a HP of 1.


Question: What Interface Module does the 20AD2P1A3AYNNDNN have?

Answer: The Allen Bradley 20AD2P1A3AYNNDNN has a Full Numeric LCD Interface Module.


Question: What is the kW of the 20AD2P1A3AYNNDNN?

Answer: The 20AD2P1A3AYNNDNN has a kW of 0.75.


Question: What Network Type is included with the Allen Bradley/Rockwell Automation 20AD2P1A3AYNNDNN?

Answer: The 20AD2P1A3AYNNDNN has a DN Network Type.


Question: What is the Ph. of the 20AD2P1A3AYNNDNN?

Answer: The Ph. of the Allen Bradley Automation 20AD2P1A3AYNNDNN is 3.


Question: Does the 20AD2P1A3AYNNDNN have a Rating?

Answer: Not Filtered A & B Frames (Optional) C, D & E Frames.


Question: What is the Voltage of the Allen Bradley-Rockwell Automation 20AD2P1A3AYNNDNN?

Answer: The 20AD2P1A3AYNNDNN has a Voltage of 480 volts AC (alternating current).


Series information for 20AD2P1A3AYNNDNN

For additional information about 20AD2P1A3AYNNDNN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD2P1A3AYNNDNN.

Revision Part # Also Known As Availability
20AD2P1A3AYNNDNN/A 20AD2P1A3AYNNDNN Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20AD2PIA3AYNNDNN
  • 2OAD2P1A3AYNNDNN
  • 2OAD2PIA3AYNNDNN

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP