GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD2P1C3AYNNNC0 |
Series: | PowerFlex 70 |
UPC: | 820919379055 |
Description:
The power rating of the AB 20AD2P1C3AYNNNC0 PowerFlex 70 is 0.75 kilowatt. 1 Hp is the rated power output PF 70 alternating current drive. It's a 2.1 A drive with a frame size of A. A full numeric LCD interface module is also supplied with this PF70 drive. It has a better board. This AB drive has the protection of the IP66 category, As a result, it is entirely dust-tight and resistant to heavy water pressures from any direction.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley inverter drive, commonly known as a PF 70 alternating current drive. 0.75 Hp is the rated power output of this in concentrate mode, and 1 Hp of rated output power when utilized in casual mode. This unit runs on 480 volts AC and has a 3-phase output power of 2.1 amps. As a result, the inverter drive is capable of handling all common and even some extravagant jobs assigned by users. A wall or a device is where it may be mounted, giving users even more convenience. International couriers can deliver this unit to any location in the world. This AB PF alternating current drive has IP66 security, meaning it is entirely dust-tight and resistant to powerful water pressures from any direction.
It has a compliant overlay, and the most essential messages are visible on an LCD, a brake Isolated-Gate Bipolar Transistor is pre-installed, an upgraded control module, and also an alternating current drive that ensures optimal performance under all conditions, making it perfect for use in large industries and industrial settings that are either dusty or have high humidity levels.The Allen-Bradley 20AD2P1C3AYNNNC0 features a CE-compliant filter as well as multiple easily accessible ports. It also has a simple interface, which is great for those who despise sophisticated controls. The keypad that is completely digital makes input much simpler and allows users to complete more activities in less time. It's also worth noting that the drive is always air cooled and runs pretty quietly. As a result, the 20AD2P1C3AYNNNC0 is well-suited to long-term use in an industrial setting.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 2.1 |
kW | 0.75 |
HP | 1 |
Frame | A |
Enclosure | Wall/Machine Mount = IP66, NEMA/UL Type 4X/12 for indoor use only |
Interface Module | Full Numeric LCD |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Not Filtered A & B Frames (Optional) C, D & E Frames |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD2P1C3AYNNNC0?
Answer: Yes. We offer repairs for the 20AD2P1C3AYNNNC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD2P1C3AYNNNC0?
Answer: If you buy the 20AD2P1C3AYNNNC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD2P1C3AYNNNC0 online?
Answer: Yes. Automation Stop sells the 20AD2P1C3AYNNNC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD2P1C3AYNNNC0?
Answer: The 20AD2P1C3AYNNNC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20AD2P1C3AYNNNC0?
Answer: The 20AD2P1C3AYNNNC0 is part of the PowerFlex 70 series.
Question: What amperes does the 20AD2P1C3AYNNNC0 have?
Answer: The amperes of the Allen Bradley/Rockwell Automation 20AD2P1C3AYNNNC0 is 2.1.
Question: What Control does the Rockwell Automation 20AD2P1C3AYNNNC0 have?
Answer: The 20AD2P1C3AYNNNC0 has a Enhanced Control.
Question: What is the Enclosure of the 20AD2P1C3AYNNNC0?
Answer: The Enclosure of the 20AD2P1C3AYNNNC0 is Wall/Machine Mount = IP66, NEMA/UL Type 4X/12 for indoor use only.
Question: Does the 20AD2P1C3AYNNNC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame does the Allen Bradley Automation 20AD2P1C3AYNNNC0 have?
Answer: The 20AD2P1C3AYNNNC0 has a A Frame.
Question: What is the HP of the 20AD2P1C3AYNNNC0?
Answer: The Rockwell Automation 20AD2P1C3AYNNNC0 has a HP of 1.
Question: What Interface Module does the 20AD2P1C3AYNNNC0 have?
Answer: The 20AD2P1C3AYNNNC0 has a Full Numeric LCD Interface Module.
Question: What kW does the Allen Bradley/Rockwell Automation 20AD2P1C3AYNNNC0 have?
Answer: The 20AD2P1C3AYNNNC0 has a kW of 0.75.
Question: Does the Allen Bradley-Rockwell Automation 20AD2P1C3AYNNNC0 have a Network Type?
Answer: None.
Question: What Ph. does the 20AD2P1C3AYNNNC0 have?
Answer: The Ph. of the 20AD2P1C3AYNNNC0 is 3.
Question: Does the 20AD2P1C3AYNNNC0 have a Rating?
Answer: Not Filtered A & B Frames (Optional) C, D & E Frames.
Question: What is the Voltage of the 20AD2P1C3AYNNNC0?
Answer: The Voltage of the Rockwell-Automation 20AD2P1C3AYNNNC0 is 480 volts alternating current (AC).
For additional information about 20AD2P1C3AYNNNC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD2P1C3AYNNNC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD2P1C3AYNNNC0/A | 20AD2P1C3AYNNNC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.