GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20BD014A0AYNANC0 |
Series: | PowerFlex 700 |
UPC: | 820919021190 |
Description:
The 20BD014A0AYNANC0 is an Allen-Bradley PowerFlex 700 AC drive for controlling three-phase induction motors. This unit has a brake but it has no resistor, and it comes without a human interface panel.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 20BD014A0AYNANC0 Powerflex 700 AC is an adjustable frequency AC Drive, produced and designed to control 3-phase induction motors. The Powerflex 700 AC has an operational voltage of 480 Volts alternating current (AC). It needs 14 amperes and generates a 10 Horsepower(HP) output. The Allen-Bradley PowerFlex 700 20BD014A0AYNANC0 is protected by a IP 20-rated National Electrical Manufacturers Association (NEMA) enclosure with a blank cover. it has an internal insulated-gate bipolar transistor (IGBT) to provide braking, but it does not have a resistor of any kind. The Powerflex 700 AC has no communication slots of any kind and it does not have any feedback apparatus. The Powerflex 700 AC also uses vector controls, the IO voltage is 24 Volts direct current with an internal Electromagnetic Compatibility (EMC) filtering system.
The Allen-Bradley PowerFlex 700 20BD014A0AYNANC0 has dimensions of 135 millimeters by 336 millimeters by 200 millimeters with a weight of 7.3 kilograms. The Powerflex 700 AC has an operating temperature of 0 to 40 degrees Celsius while in a non-condensing humidity level range of between 5 and 95 percent humidity. The Powerflex 700 AC gives the operator a variety of modes of operation to suit a range of different applications. First, the Volts per Hertz mode is used to control fans and pumps. Second, the sensorless vector setting is used in operations that need high torque. Finally, the vector setting is used for torque control along with low-speed operations. The Allen-Bradley PowerFlex 700 20BD014A0AYNANC0 has over-temperature protection along with Class 10 motor overload protection.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 700 AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Prechg. | - |
Amps | 14 |
Hp | 10 |
Frame | 1 |
Enclosure | IP 20, NEMA/UL Type 1 |
Operator Interface | Blank Cover |
Documentation | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
CE Filter | Yes |
CM Choke | Yes |
Network Type | None |
Control | Vector |
I/O Volts | 24V DC |
Type | None |
Question: Does Automation Stop offer repairs on the 20BD014A0AYNANC0?
Answer: Yes. We offer repairs for the 20BD014A0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20BD014A0AYNANC0?
Answer: If you buy the 20BD014A0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20BD014A0AYNANC0 online?
Answer: Yes. Automation Stop sells the 20BD014A0AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20BD014A0AYNANC0?
Answer: The 20BD014A0AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20BD014A0AYNANC0?
Answer: The 20BD014A0AYNANC0 is part of the PowerFlex 700 series.
Question: What is the amperes of the Allen Bradley/Rockwell Automation 20BD014A0AYNANC0?
Answer: The Allen Bradley/Rockwell Automation 20BD014A0AYNANC0 has a amperes of 14.
Question: Does the Rockwell Automation 20BD014A0AYNANC0 have a CE Filter?
Answer: Yes.
Question: Does the 20BD014A0AYNANC0 have a CM Choke?
Answer: Yes.
Question: What Control does the Allen Bradley/Rockwell Automation 20BD014A0AYNANC0 have?
Answer: The Allen Bradley/Rockwell Automation 20BD014A0AYNANC0 has a Vector Control.
Question: What Documentation is included with the 20BD014A0AYNANC0?
Answer: The 20BD014A0AYNANC0 has a Manual Documentation.
Question: What is the Enclosure of the 20BD014A0AYNANC0?
Answer: The Enclosure of the Rockwell Automation 20BD014A0AYNANC0 is IP 20, NEMA/UL Type 1.
Question: What is the Frame of the 20BD014A0AYNANC0?
Answer: The Allen-Bradley 20BD014A0AYNANC0 has a Frame of 1.
Question: What Hp does the 20BD014A0AYNANC0 have?
Answer: The Hp of the 20BD014A0AYNANC0 is 10.
Question: What is the input/output Volts of the 20BD014A0AYNANC0?
Answer: The 20BD014A0AYNANC0 has a input/output Volts of 24 volts direct current.
Question: Does the Rockwell-Automation 20BD014A0AYNANC0 have a Network Type?
Answer: None.
Question: What operator interface does the 20BD014A0AYNANC0 have?
Answer: The Allen Bradley-Rockwell Automation 20BD014A0AYNANC0 has a Blank Cover operator interface unit.
Question: What is the Ph. of the 20BD014A0AYNANC0?
Answer: The Ph. of the 20BD014A0AYNANC0 is 3.
Question: What Prechg. does the 20BD014A0AYNANC0 have?
Answer: The Rockwell-Automation 20BD014A0AYNANC0 has a - Prechg..
Question: What Voltage does the Rockwell-Automation 20BD014A0AYNANC0 have?
Answer: The Rockwell-Automation 20BD014A0AYNANC0 has a Voltage of 480 volts AC (alternating current).
For additional information about 20BD014A0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20BD014A0AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20BD014A0AYNANC0/A | 20BD014A0AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.