The 20BD034A3AYNANC0 is a variable frequency AC drive. Allen-Bradley/Rockwell Automation produced the drive, which is part of the PowerFlex 700 series. The drive has a number of performance and security features. The drive has a speed profiler that employs a 16-step indexer to place encoder counts, digital inputs, and parameter levels point-to-point. The drive is powered by a 480-volt source and has a current rating of 34 amps. This drive does not have a communication adaptor. The drive's braking is accomplished with the IGBT braking system. In this type, there is no braking resistor. According to the CE EMC directive, the 20BD034A3AYNANC0 features a second environment filter. At maximum load capacity, the power ride-thru time is 15 milliseconds, and the control logic ride-thru time is 0.5 seconds with a 2-second interval. The drive's total power output under normal load is 25 horsepower, while it is 20 horsepower under maximum load. The drive enables sensorless vector control with full tuning as well as normal Volts/Hertz control with full custom flexibility.

The 20BD034A3AYNANC0 has two acceleration and deceleration times that can be programmed separately and they may be set from 0.0 and 3600 seconds in 0.1-second increments. It can handle a 110 percent overload for 1 minute and a 150 percent overload for up to 3 seconds, allowing for an intermittent overload. A panel mounting base may be connected to the drive to allow it to be mounted in various locations. The casing of the panel mounting base is not watertight and is only suitable for indoor usage. A human-machine interaction module is included in the 20BD034A3AYNANC0. A keypad and a lighted display are included with the module. The display can display seven lines and twenty-one characters at a time and has excellent viewing angles. The drive displays the drive's current condition and running information in real-time.