GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

20DD052A0EYNAENNN

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 20DD052A0EYNAENNN
Series: PowerFlex 700S

Description:

The 20DD052A0EYNAENNN is a PowerFlex 700S Drives with Phase II Control Adjustable Frequency AC Drive that operates at a voltage of 480v ac and has operating amperage of 52. In addition this particular device has a size 3 frame type. It also contains IGBT brake. This component equipped with an adjustable bus undervoltage trip.


Key Features:

  • equipped with heat sink thermistor that is monitored by microprocessor overtemp trip
  • equipped with a blank cover human interface
  • ships with logic control ride thru of 0.25 seconds with the drive not running
  • utilizes power ride thru of 15 milliseconds at full load
  • equipped with CE filter
  • equipped with CM choke
  • utilizes 40 horsepower
  • comes with resistor: no

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical Specifications

Manufacturer Allen Bradley/Rockwell Automation
Series PowerFlex 700S Drives with Phase II Control
Voltage 480V AC
Ph 3
Precharge -
Amps 52
Hp 40
Frame 3
Enclosure IP20, NEMA Type 1 with Conformal Coat
Operator Interface Blank Cover
Documentation English Manual
w/Brake IGBT Yes
w/Resistor No
CE Filter Yes
CM Choke Yes
du/dt Filter No
Version DPI EtherNet/IP
Logix Expansion N/A
SynchLink Standard
Cassette None
Feedback Option Standard (Incremental Encoder)
Additional Configuration Phase I Control
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 20DD052A0EYNAENNN?

Answer: Yes. We offer repairs for the 20DD052A0EYNAENNN and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 20DD052A0EYNAENNN?

Answer: If you buy the 20DD052A0EYNAENNN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 20DD052A0EYNAENNN online?

Answer: Yes. Automation Stop sells the 20DD052A0EYNAENNN online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 20DD052A0EYNAENNN?

Answer: The 20DD052A0EYNAENNN is made by Allen Bradley - Drives.


Question: What type of product is the 20DD052A0EYNAENNN?

Answer: The 20DD052A0EYNAENNN is part of the PowerFlex 700S series.


Question: What Additional Configuration does the Allen Bradley 20DD052A0EYNAENNN have?

Answer: The Allen Bradley 20DD052A0EYNAENNN has a Phase I Control Additional Configuration .


Question: What is the amperes of the Rockwell-Automation 20DD052A0EYNAENNN?

Answer: The amperes of the Rockwell-Automation 20DD052A0EYNAENNN is 52.


Question: Does the Allen Bradley-Rockwell Automation 20DD052A0EYNAENNN have a Cassette?

Answer: None.


Question: Does the 20DD052A0EYNAENNN have a CE Filter?

Answer: Yes.


Question: Does the Allen Bradley-Rockwell Automation 20DD052A0EYNAENNN have a CM Choke?

Answer: Yes.


Question: What Documentation is included with the 20DD052A0EYNAENNN?

Answer: The 20DD052A0EYNAENNN has a English Manual Documentation.


Question: Does the Allen Bradley 20DD052A0EYNAENNN have a du/dt Filter?

Answer: No.


Question: What is the Enclosure of the 20DD052A0EYNAENNN?

Answer: The Enclosure of the 20DD052A0EYNAENNN is IP20, NEMA Type 1 with Conformal Coat.


Question: What Feedback Option is included with the Allen Bradley Automation 20DD052A0EYNAENNN?

Answer: The Allen Bradley Automation 20DD052A0EYNAENNN has a Standard (Incremental Encoder) Feedback Option.


Question: What is the Frame of the 20DD052A0EYNAENNN?

Answer: The Frame of the Rockwell-Automation 20DD052A0EYNAENNN is 3.


Question: What Hp does the 20DD052A0EYNAENNN have?

Answer: The Hp of the Allen Bradley Automation 20DD052A0EYNAENNN is 40.


Question: What Logix Expansion does the Allen Bradley/Rockwell Automation 20DD052A0EYNAENNN have?

Answer: The Allen Bradley/Rockwell Automation 20DD052A0EYNAENNN has a N/A Logix Expansion.


Question: What operator interface unit is included with the 20DD052A0EYNAENNN?

Answer: The Rockwell-Automation 20DD052A0EYNAENNN has a Blank Cover operator interface unit.


Question: What is the Ph of the Rockwell-Automation 20DD052A0EYNAENNN?

Answer: The Ph of the Rockwell-Automation 20DD052A0EYNAENNN is 3.


Question: What Precharge is included with the 20DD052A0EYNAENNN?

Answer: The Allen-Bradley 20DD052A0EYNAENNN has a - Precharge.


Question: What SynchLink does the Allen Bradley/Rockwell Automation 20DD052A0EYNAENNN have?

Answer: The 20DD052A0EYNAENNN has a Standard SynchLink.


Question: What Version does the 20DD052A0EYNAENNN have?

Answer: The Rockwell-Automation 20DD052A0EYNAENNN has a DPI EtherNet/IP Version.


Question: What is the Voltage of the Allen-Bradley 20DD052A0EYNAENNN?

Answer: The Allen-Bradley 20DD052A0EYNAENNN has a Voltage of 480 volts alternating current (AC).


Series information for 20DD052A0EYNAENNN

For additional information about 20DD052A0EYNAENNN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20DD052A0EYNAENNN.

Revision Part # Also Known As Availability
20DD052A0EYNAENNN/A 20DD052A0EYNAENNN Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20DD052AOEYNAENNN
  • 20DD0S2A0EYNAENNN
  • 20DD0S2AOEYNAENNN
  • 20DDO52A0EYNAENNN
  • 20DDO52AOEYNAENNN
  • 20DDOS2A0EYNAENNN
  • 20DDOS2AOEYNAENNN
  • 2ODD052A0EYNAENNN
  • 2ODD052AOEYNAENNN
  • 2ODD0S2A0EYNAENNN
  • 2ODD0S2AOEYNAENNN
  • 2ODDO52A0EYNAENNN
  • 2ODDO52AOEYNAENNN
  • 2ODDOS2A0EYNAENNN
  • 2ODDOS2AOEYNAENNN

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP