GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20G1AND156AA0NNNNN |
Series: | PowerFlex 755 |
Description:
Part number 20G1AND156AA0NNNNN, which was designed and produced by the company known as Allen Bradley / Rockwell Automation, is an AC drive from the PoweFlex 755 family of products. This drive has a voltage rating of 480 volts AC, three-phase. This drive is equipped with an IP00, NEMA/UL open-type enclosure and it has a frame size of 6. This drive has an output current rating of 156 amperes and an output power rating of 125 horsepower when operating at normal duty.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 20G1AND156AA0NNNNN drive features an Ethernet communication interface which allows for Integrated Motion over IP control feature. This Power Flex AC drive can be connected to the same network as a Kinetix motion drive. This drive allows parameters to be directly integrated into the ControlLogix controller or the compact variant. When powered from a nominal 480 VAC, 3-phase supply, this drive produces 125 horsepower output and 156 amps of output current for normal operation, and 100 amps and 100 horsepower output for heavy-duty operation. It features a NEMA/UL IP20/IP00 rated open housing with built-in filtering and does not have a door-mounted Human Interface Module (HIM). This drive allows for positioning through indexing, PC programming, electronic gearing, and velocity or position profiling. The 20G1AND156AA0NNNNN also includes a conformal coating. It is supported by a high-resolution LCD screen that acts as an HMI. The display can contain up to 6 lines of text to provide users with a clearer explanation of drive parameters and events. The 20G1AND156AA0NNNNNN has a real-time clock to provide a time-stamped event. The 20G1AND156AA0NNNNN features embedded control tech allowing for block programming and independent control functionality. The drive initially comes with a frame size 6 with an IP00 rating (NEMA/UL open-type) but can be changed to IP20 (NEMA/UL Type-1) by implementing the optional accessory (20-750-NEMA1-F6). The drive measures 665 mm x 308 mm x 346 mm (height x width x depth). This AC drive has an operating temperature that should remain within a range of 0 to 40 degrees Celsius.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 755-Series AC Drives |
MPN | 20G1AND156AA0NNNNN |
Input Type | AC Input with Precharge, no DC Terminal |
Enclosure | IP20/IP00, NEMA UL Type Open |
Voltage | 480V AC/650V DC |
Amps | 156 |
Hp | 125 |
Enclosure Code B,J,L,T | - |
Enclosure Code F | 1 |
Enclosure Code G | 6 |
Enclosure Code N | 6 |
Enclosure Code K,P,W,Y | - |
Enclosure Code R | - |
Filtering | Yes |
Default CM Cap Connection | Jumper Removed |
Internal Resistor | No |
Internal Transistor | Yes |
Operator Interace | No Door Mounted HIM |
Question: Does Automation Stop offer repairs on the 20G1AND156AA0NNNNN?
Answer: Yes. We offer repairs for the 20G1AND156AA0NNNNN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20G1AND156AA0NNNNN?
Answer: If you buy the 20G1AND156AA0NNNNN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20G1AND156AA0NNNNN online?
Answer: Yes. Automation Stop sells the 20G1AND156AA0NNNNN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20G1AND156AA0NNNNN?
Answer: The 20G1AND156AA0NNNNN is made by Allen Bradley - Drives.
Question: What type of product is the 20G1AND156AA0NNNNN?
Answer: The 20G1AND156AA0NNNNN is part of the PowerFlex 755 series.
Question: What amperes does the Rockwell Automation 20G1AND156AA0NNNNN have?
Answer: The Rockwell Automation 20G1AND156AA0NNNNN has a amperes of 156.
Question: What Default CM Cap Connection does the Allen Bradley-Rockwell Automation 20G1AND156AA0NNNNN have?
Answer: The 20G1AND156AA0NNNNN has a Jumper Removed Default CM Cap Connection.
Question: What is the Enclosure of the Allen Bradley 20G1AND156AA0NNNNN?
Answer: The Enclosure of the 20G1AND156AA0NNNNN is IP20/IP00, NEMA UL Type Open.
Question: What Enclosure Code B,J,L,T is included with the 20G1AND156AA0NNNNN?
Answer: The 20G1AND156AA0NNNNN has a - Enclosure Code B,J,L,T.
Question: What is the Enclosure Code F of the 20G1AND156AA0NNNNN?
Answer: The Enclosure Code F of the Allen Bradley/Rockwell Automation 20G1AND156AA0NNNNN is 1.
Question: What is the Enclosure Code G of the 20G1AND156AA0NNNNN?
Answer: The Enclosure Code G of the 20G1AND156AA0NNNNN is 6.
Question: What Enclosure Code K,P,W,Y is included with the Allen-Bradley 20G1AND156AA0NNNNN?
Answer: The Allen-Bradley 20G1AND156AA0NNNNN has a - Enclosure Code K,P,W,Y.
Question: What Enclosure Code N does the Rockwell Automation 20G1AND156AA0NNNNN have?
Answer: The Rockwell Automation 20G1AND156AA0NNNNN has a Enclosure Code N of 6.
Question: What Enclosure Code R does the Allen Bradley-Rockwell Automation 20G1AND156AA0NNNNN have?
Answer: The Allen Bradley-Rockwell Automation 20G1AND156AA0NNNNN has a - Enclosure Code R.
Question: What is the Hp of the Rockwell-Automation 20G1AND156AA0NNNNN?
Answer: The Hp of the 20G1AND156AA0NNNNN is 125.
Question: What Input Type is included with the 20G1AND156AA0NNNNN?
Answer: The Allen-Bradley 20G1AND156AA0NNNNN has a alternating current (AC) Input with Precharge, no direct current (DC) Terminal Input Type.
Question: Does the 20G1AND156AA0NNNNN have a Internal Resistor?
Answer: No.
Question: Does the 20G1AND156AA0NNNNN have a Internal Transistor?
Answer: Yes.
Question: Does the Rockwell Automation 20G1AND156AA0NNNNN have a Operator Interace?
Answer: No Door Mounted HIM.
Question: What Voltage does the 20G1AND156AA0NNNNN have?
Answer: The 20G1AND156AA0NNNNN has a Voltage of 480 volts alternating current (AC)/480 volts DC.
For additional information about 20G1AND156AA0NNNNN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20G1AND156AA0NNNNN.
Revision Part # | Also Known As | Availability |
---|---|---|
20G1AND156AA0NNNNN/A | 20G1AND156AA0NNNNN Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.