The PowerFlex 4 series AC drive 22A-D6P0N104 has a voltage rating of 480 Volts alternating current with three phase. It requires an input of 100 to 120 Volts of alternating current, single phase, with 6 Amperes and 1.1 Kilowatt (1.5 horsepower) of power. It is panel mounted with an open type enclosure rated IP20, NEMA/UL Type Open. The drive has a fixed keypad interface module and emission class is "Not Filtered". The unit has brake IGBT option. The PowerFlex 4 drive is programmed to provide an auto boost (IR compensation) and slip compensation automatically. It also has excellent speed regulation and high levels of torque over the full range of speed and better response to increase in load while regulating the speed. The integral keypad is usable from first power up and ten of the most common application parameters are included in a basic program group for user’s convenience when programming. The four digit display with 10 additional LED indicators offers an easy-to-follow status and communication. The connection is through an RS-485 port to a PC or in a network setting. The drive has a removable MOV to ground that facilitates trouble-free operation in case of an ungrounded distribution system. The unit offers sensorless vector control for high torque over the speed range and adaptability to the characteristics of each motor. The variable PWM enables higher current output at low frequencies. The integral PID ability provides valuable flexibility to the drive’s application. The in-built functions such as timer, counter, basic logic, and StepLogic eliminate the need for additional hardware and reduce complications in controls.

Power flex 4 Allen-Bradley 22A – D6PON104 is an alternating current inverter drive with an integral digital keypad as the mode of data input and a light-emitting diode (LED) display. The drive promotes powerful motor speed control to precision. It is designed in a manner that can be used with ease and flexibility. The communication module consists of the RS-458 connector. In order to minimize the transfer of electromagnetic noise to and from between the drive system and the mains power supply, the drive contains an internal EMC filtering. It has no complaint filtering. The system can be mounted in a panel or a DIN rail, thus providing a neat and well-organized layout. For communication networks, the type of fieldbus used is the Modbus. To determine the effectiveness of the device enclosure in resisting moisture and dust from filtering into the device, UL open (NEMA) standards are applied. It has an IP rating of IP20 with frame size B. The alternating current input voltage supply is 480 Volts and a main frequency of 50/60 Hertz, 3 Phase input. The power consumed is 2.2 Kilowatts with a current rating of 6.0 amperes. It has 3 Horse-power. It has a 3 PHASE output, the output voltage is 460 Volts AC. The drive constitutes a dynamic brake chopper. The inverter drive has 2 analog inputs and a single analog output, the digital inputs and outputs are considered to be 4 and 2, respectively. The dimensions of the system are 136 × 152 × 80 mm (L × H × W) with an estimated weight of 660 pounds.