Allen-Bradley 22B-D4P0C104

An AC drive by Allen-Bradley, the 22B-D4P0C104 is part of the PowerFlex 40 series with a 480-volt AC input voltage. This drive has a three-phase motor with a 4-ampere output current. This IP 66 rated NEMA class 4X enclosure is used by this drive module, which has a frame size of B. The device also has an LCD screen and a digital keyboard. It is not equipped with a CE-approved filter, however, it does include an RS-485 internal connection module. This module is a three-phase drive with a power of 480 volts applied as an input alternating current. The ESD-sensitive components and assemblies are used in the 22B-D4P0C104 drive. As a result, while installing or repairing the drive, users must verify that static control measures are followed. It should be noted that if the ESD control methods are not followed, component damage may result. As a result, only people acquainted with ESD control procedures, or Allen-Bradley drive installation standards, should be permitted to install the device.

The Allen-Bradley produced 22B-D4P0C104 drive should be kept at temperatures ranging from -40 to 85 degrees Celsius. The relative humidity should be between 5 and 95 percent non-condensing, and the device must not be contacted to corrosive materials. These steps will guarantee that the product lasts longer. In order to prevent debris from sliding through the apertures of the drive enclosure while inserting the 22B-D4P0C104 drives, a plastic top panel is installed. This drive is equipped with a metal oxide varistor (MOV), which would be referred to as ground, for the purpose of protection. When the drive is connected to an ungrounded or resistance ground distribution model, this element should be disconnected to prevent damage to the drive.