The Allen-Bradley 22F-A2P5N103 PowerFlexTM 4M AC adjustable frequency drive is part of the PowerFlex range of drives, which offers great performance and flexibility for motor control applications. It offers an operator interface, networks, programming and use ease, and feed-through wiring, much like the other PowerFlex drives. It also has application adaptability to meet the demands of OEMs and end-users all around the globe. The smallest and least expensive drive in the PowerFlex Component Class family, thanks to its compact and space-saving design. To conserve space, Zero-Stacking may be employed at temperatures up to 40 degrees Celsius. Because of its inherent filtering, which is accessible on all 240 Volt 1-phase drives, the 22F-A2P5N103 may meet EN61800-3 criteria at a low cost.

The 22F-A2P5N103 is a single-phase drive with a 0.4-kilowatt (0.5-horsepower) power rating, a 240-volt AC input voltage with a frequency of 50 to 60 Hertz, and a 2.5-amp output. The drive's feed-through wiring allows for variable speed control with little retrofit time and installation, as well as compact frame size. An open IP20 enclosure, no brake, no CE-compliant filter, an LED display, and a fixed digital keyboard were all supplied. This built-in digital keypad allows you to operate the drive using local control and potentiometer keys after it's installed. The programmable keys on this drive, like those on other PowerFlex drives, perform the same functionality across all models. As a result, learning to program one entails learning to program all of them. To support easy and speedy programming, the Standard Program Group provides 12 of the most often used application parameters. The 22F-A2P5N103 has a four-digit display, and ten additional LED indicators for easily showing drive status and information. The drive features a NEMA/UL Type 4X remote control and a NEMA/UL Type 1 hand-held LCD keyboard, both of which contain the well-known CopyCat capabilities to boost control adaptability and allow additional programming. The inbuilt RS-485/DSI connectors, which may also be used in a multi-drop network configuration, allow programming from a PC.

The DIN rail mounting feature common on most "A" frame drives allows the 22F-A2P5N103 to be fitted in seconds. For further flexibility, panel mounting is also offered as an alternative installation technique. When installing the control wire, keep the following aspects in mind: Terminals 1, 2, and 3 are dedicated to Stop, Start, and Reverse operations, respectively, and are programmable for 2- or 3-wire operations. To give even more flexibility, I/O terminals 4 and 5 may be configured to execute jog, auxiliary fault, local control, preset frequency, RS485 control, clear fault, and second accel/decal. To change the drive's speed, use the drive's electrically isolated 0–10 Volt and 4–20 milliamps inputs. At 24 Volts DC, a DIP switch setting may be utilized to establish the control logic for sink or source control. Only a regular blade screwdriver should be used to tighten the control terminal screws. The drive comes with a jumper put over I/O terminals 01 and 11 to permit out-of-the-box keypad usage.

The 22F-A2P5N103 is a variable frequency AC drive,  it comes from the Allen-Bradley PowerFlex 4M range of drives that combines high performance with flexible motor controller applications. As with other PowerFlex drives, it has an operators interaction, networks, simplicity of programming and usage, and feed-through wiring system. It also features application versatility to satisfy the needs of OEMs, system integrators, and worldwide end customers. As the tiniest drive in the PowerFlex Components class product of drives, it is also the least expensive, thanks to its compact and space-saving architecture. Zero-Stacking may be used at ambient temperatures 40 degrees Celsius (maximum) to save space. Temperatures approximately 50 °C are acceptable as long as the necessary distance between the drives is preserved. The 22F-A2P5N103 can satisfy EN61800-3 requirements cost-effectively due to its inherent filtering, which is obtainable on all 240 volt single-phase drives.

The 22F-A2P5N103 is a 1-phase drive with a 0.4 kilowatt (0.5 Hp) rated power, a 240 volt AC input voltage with a frequency of 50/60 hertz, and a 2.5 amp output. The feed-through wire architecture of the drive enables variable speed control with little retrofit time and setup. It also has a frame size A design, an open IP20 housing, no brake, no CE-compliant filter, an LED screen, and a fixed digital keyboard. Once fitted, this inbuilt digital keypad enables the operation of the drive-through local control and adjustable keys. As with other PowerFlex drives, its programmable keys perform the same operations across all models, thus learning to program one means learning to program them all. To promote simple and rapid programming, the Basic Program Group includes 12 of the most frequently used application parameters. The 22F-A2P5N103 has a four-digit display and ten extra LED indicators for displaying drive status and information in an accessible manner.

Programming from a PC is enabled using the integrated RS-485/DSI connections, which may be utilized in a multi-drop network arrangement as well. Optional internal communications adapters (including PROFIBUS DP and EtherNet/IP adapters) may be utilized to enhance process efficiency, but only in conjunction with an adequate communication kit.

Panel mounting is also available as an alternate installation method for the increased flexibility of this drive unit. Take this into consideration while installing the control wiring, the I/O ports are programmable for 2 or 3-wire operation, with terminals 1, 2, and 3 devoted to stop, start, and reverse operations, respectively. To provide further versatility, I/O terminals 4 and 5 may be programmed to perform jog, auxiliary fault, local control, preset frequency, RS485 control, clear fault, and second accel/decal. The drive's electrically separated 0 to 10 volts and 4 to 20 mA inputs may be utilized to adjust the drive's speed. A DIP switch setting may be used to configure the control logic for sink or source control at 24 volts DC. For the control terminal screws, only a normal blade screwdriver should be used. To facilitate out-of-the-box keypad use, the drive ships with a jumper inserted between I/O terminals 01 and 11. As a result, a single form C relay may be designed to deliver status information for a wide variety of driving situations.