Allen-22F-D1P5N103 Bradley's adjustable frequency AC drive is a member of the PowerFlex 4M product family. This drive accepts input voltages of 380 to 480 V AC 47-63 hertz frequency. It features a 3-phase output voltage ranging 0 to 480 V AC, a 1.5 ampere output current rating, a 0.5 horsepower or 0.4-kilowatt output power, and an of 0 to 400 hertz frequency band. It is entirely programmable and has a 97.5 percentage efficiency rating.

Additionally, the 22F-D1P5N103 might be utilized to reduce energy usage. It features a customizable start and stops profile with settings for acceleration and deceleration periods, ramp-up, and ramp-down. Furthermore, it has many configurable stop modes, including ramp, coast, DC-brake, ramp-to-hold, and S-curve. The 22F-D1P5N103 includes current and voltage protection, as well as a broad overload protection range of 150 percent for 60 seconds and 200 percent for 3 seconds. The drive efficiency is 97.5 percent, with ride-through times of 100ms and 0.5s for power and logic, respectively. It contains five digital 24V DC control inputs with 100K ohm and 250 ohm impedance that may be switched between source and sink control via a DIP switch, as well as one 0 to 10V DC and 4 to 20 milliamperes, 10-bit analog input. At 240V AC, 125V (DC), 30V (AC), this module has one form C relay output with resistive and inductive ratings of 3 amps and 0.5 amps, respectively. The Volts per Hertz (V/Hz) controlling option also allows for performance adjustment, with a performance ratio of 40:1 at 2% of the base speed (suitable for Open Loop Applications with Slip Compensation). It includes a carrier frequency range of 2 to 10 kilohertz that may be adjusted, as well as a number of pre-programmed stop modes (Ramp, Coast, DC-Brake, Ramp-to-Hold, and S Curve). The 22F-D1P5N103 seems to contain a programming panel as well as a four-digit LCD display screen with ten (10) additional indicators indicating driving modes. It has an inherent RS-485 communication capability for PC-based programming and multi-drop network configuration, as well as optional LonWorks, DeviceNet, Ethernet/IP, PROFIBUS DP, and ControlNet communication capabilities for expanded network capacity. It runs from 14 to 122 degrees Fahrenheit with an acceptable relative humidity of 0 to 95 percent and this unit should be kept at  40 to 185 degrees Fahrenheit. A 1G operational vibration resist at 5-500Hz, a 15G shock withstand at 11 milliseconds, and convection cooling is also included in the drive. The 22F-D1P5N103 weighs around 1.6kg and has dimensions of 50 mm x 172 mm x 152 mm. It is UL, CSA, and CE certified.