GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Automation Product |
Part Number: | 25-FAN1-70C |
Series: | 25 |
UPC: | 884951990173 |
Description:
Allen Bradley's control module fan kit, 25-FAN1-70C, is used in drives above the control unit. It has a 24 volts DC input voltage, a 14 to 27.6 volts DC operational voltage range, and a 0.1 amperes input current. It has a rated speed of 7000 revolutions per minute (rpm). The maximum air flow of this device is rated at 0.575 m�/min, with a maximum air pressure of 7.70 mm H2O. This device can have a frame size of A to D.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 25-FAN1-70C is a control module fan kit that was designed and produced by the company known as Allen Bradley / Rockwell Automation. This product is used with drives in an environment where ambient temperatures are up to 70 degrees Celsius. It is also used with drives for horizontal mounting and zero stacking, in which the ambient temperature ranges up to 65 degrees Celsius. For drives that are mounted vertically, the ambient temperature should be 60 to 70 degrees Celsius maximum. For drives with vertical mounting and zero stacking, the ambient temperature should be 55 to 65 degrees Celsius maximum.
Part number 25-FAN1-70C can be used with Frame sizes ranging from A to D. It requires an input voltage of 24 volts DC (direct current) for powering up. Its operational voltage ranges from 14 volts DC to 27.6 volts DC. It draws an input current of 0.1 amperes for the source. For frame D, a 24 volts DC source is already embedded within the frame. An external power source is needed for other frames. It can run up to a reference speed of 7000 revolutions per minute (rpm). It has UL class A type insulation. This product has a wire size requirement of 0.32 mm², or 22 AWG. This product has a rated torque of 0.29 Nm to 0.39 Nm, or the equivalent of 2.6 to 3.47 lb-in. The acoustical noise rating of this device is 40.5 dB-A. At zero static pressure, this fan has a maximum air flow of 0.575 m³/min.
Region of Manufacture* | Taiwan |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 25-FAN1-70C?
Answer: Yes. We offer repairs for the 25-FAN1-70C and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 25-FAN1-70C?
Answer: If you buy the 25-FAN1-70C through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 25-FAN1-70C online?
Answer: Yes. Automation Stop sells the 25-FAN1-70C online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 25-FAN1-70C?
Answer: The 25-FAN1-70C is made by Allen Bradley - Drives.
Question: What Region of Manufacture* does the 25-FAN1-70C have?
Answer: The 25-FAN1-70C has a Taiwan Region of Manufacture*.
For additional information about 25-FAN1-70C check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 25-FAN1-70C.
Revision Part # | Also Known As | Availability |
---|---|---|
25-FAN1-70C/A | 25-FAN1-70C Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.