GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Automation Product |
Part Number: | 25-JBAC |
Series: | 25 |
Description:
Part number 25-JBAC is a conversion kit. This product, which was designed and manufactured by Allen Bradley, is part of the PowerFlex 520-Series of products. This product includes the IP30/NEMA 1/UL Type 1 installation kit used to convert IP20 rated products to IP30 rated products. This kit was designed for size C frames. The conduit box of this kit has 2 M3 screws with a screw torque rated at 0.39 to 0.588 Nm. The conduit box front bracket has 1 M3 screw with a screw torque rated at 0.39 to 0.588 Nm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 25-JBAC is a conversion kit. This product is NEMA certified and UL Listed. It converts an IP20 rated product or device to an IP30 rated at the enclosure. The conversion kit is a Frame C that belongs to Series A. This is a part of the various PowerFlex 520 accessories, in which the field kit has to be installed. IP20 is a rating that verifies that the product is secure and cannot be touched by fingers or objects that are greater than 12 millimeters. This rating is usually given to objects that have enclosures less than 12 millimeters. IP20 does not protect the product from liquids or condensation. IP30 is an even more protected and secure, as this rating verifies that the enclosure of the products is less than 2.5 millimeters. This ensures that the fingers or any tool that is greater than this size would not be able to penetrate the enclosure boundaries. IP30 does not ensure protection from liquids. The 25-JBAC is a two (2) front and back piece casing to enclose the product of a frame C. The kit also has a retainer clip that comes with all IP30/NEMA 1/UL Type1 kit package. The conduit box has 2 screws of type M3, and the screw torque is 0.39 Nm to 0.588 Nm (3.47 lb-in to 5.2 lb-in) while the conduit box front bracket has 1 screw of M3 type with a rated torque of 0.39 Nm to 0.588 Nm (3.47 lb-in to 5.2 lb-in).
Question: Does Automation Stop offer repairs on the 25-JBAC?
Answer: Yes. We offer repairs for the 25-JBAC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 25-JBAC?
Answer: If you buy the 25-JBAC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 25-JBAC online?
Answer: Yes. Automation Stop sells the 25-JBAC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 25-JBAC?
Answer: The 25-JBAC is made by Allen Bradley - Drives.
For additional information about 25-JBAC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 25-JBAC.
Revision Part # | Also Known As | Availability |
---|---|---|
25-JBAC/A | 25-JBAC Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.