GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 25A-D010N114

25A-D010N114 Image 1 thumbnail
25A-D010N114 Image 2 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Automation Product
Part Number: 25A-D010N114
Series: PowerFlex 523

Description:

The Allen Bradley 25A-D010N114 is a PowerFlex 523 AC drive that belongs to the Bulletin 25A series of products. This device is a 3-phase, 480 volts AC drive with an output current rating of 10.5 amperes, a voltage tolerance of minus 15 percent/plus 10 percent, and a B Frame. This drive has an IP20 NEMA open-type enclosure. This drive is equipped with a standard interface module, an EMC filter, and a standard braking mechanism.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$1,539.00

Available: 8

What is Original Packaging

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 25A-D010N114 was designed and produced by Allen Bradley / Rockwell Automation. This drive incorporates a modular design in its power and control units, has mains free configuration, and supports one (1) accessory card. Designed for quick installation using DIN rail mounting or panel mounting, this device incorporates zero stacking features at 45 degrees Celsius, integral EMC filtering, integral brake transistor for dynamic braking, a jumper for control wiring flexibility, and adjustable pulse width modulation (PWM) frequencies of up to 16 kilohertz. This drive employs volts per hertz and sensorless vector control technology for implementing motor control, PointStop position control, and is fitted with 1 integral PID loop, 1 analog output, 5 digital output and 1 relay output. Furthermore, it comes retrofitted with Dual port Ethernet/IP option card and integral RS-485/DSI communication.

This Allen Bradley AC drive has an input voltage range of 323 to 528 volts, a total power loss of 133 watts, a bus overvoltage trip of 810 volts DC bus, a bus undervoltage trip of 390 volts DC bus, and a power ride through of 100 milliseconds. Additionally, this alternating current drive has a 47 to 63 hertz frequency tolerance range. The displacement factor across the entire speed range is 0.98. This device also has a programmable output frequency range of 0 to 500 hertz, as well as a typical efficiency level of 97.5 percent. This Bulletin 25A drive has a control input bandwidth of 10 Rad per second for both open and closed loops, a 6-milliampere control circuit current, and a 10-bit analog input resolution. The operating temperature range of this device is -40 to +85 degrees Celsius.

Technical Specifications

Manufacturer Allen Bradley / Rockwell Automation
Series PowerFlex 523 Adjustable Frequency AC Drive
MPN 25A-D010N114
Voltage 480V AC
Phase 3
Enclosure IP 20 NEMA/Open
Interface Module Standard
EMC Filter Filter
Braking Standard
Amps 10.5
Frame B
HP (Normal Duty) 5
kW (Normal Duty) 4
HP (Heavy Duty) 5
kW (Heavy Duty) 4
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 25A-D010N114?

Answer: Yes. We offer repairs for the 25A-D010N114 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 25A-D010N114?

Answer: If you buy the 25A-D010N114 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 25A-D010N114 online?

Answer: Yes. Automation Stop sells the 25A-D010N114 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 25A-D010N114?

Answer: The 25A-D010N114 is made by Allen Bradley - Drives.


Question: What type of product is the 25A-D010N114?

Answer: The 25A-D010N114 is part of the PowerFlex 523 series.


Question: What is the amperes of the 25A-D010N114?

Answer: The amperes of the Allen Bradley-Rockwell Automation 25A-D010N114 is 10.5.


Question: What Braking is included with the Rockwell-Automation 25A-D010N114?

Answer: The 25A-D010N114 has a Standard Braking.


Question: What EMC Filter is included with the Rockwell Automation 25A-D010N114?

Answer: The Rockwell Automation 25A-D010N114 has a Filter EMC Filter.


Question: What is the Enclosure of the Allen Bradley/Rockwell Automation 25A-D010N114?

Answer: The Enclosure of the 25A-D010N114 is IP 20 NEMA/Open.


Question: What Frame is included with the Allen Bradley 25A-D010N114?

Answer: The 25A-D010N114 has a B Frame.


Question: What is the HP (Heavy Duty) of the 25A-D010N114?

Answer: The HP (Heavy Duty) of the Rockwell-Automation 25A-D010N114 is 5.


Question: What is the HP (Normal Duty) of the 25A-D010N114?

Answer: The Allen-Bradley 25A-D010N114 has a HP (Normal Duty) of 5.


Question: What Interface Module does the Allen Bradley 25A-D010N114 have?

Answer: The Allen Bradley 25A-D010N114 has a Standard Interface Module.


Question: What kW (Heavy Duty) does the Allen Bradley Automation 25A-D010N114 have?

Answer: The Allen Bradley Automation 25A-D010N114 has a kW (Heavy Duty) of 4.


Question: What kW (Normal Duty) does the 25A-D010N114 have?

Answer: The kW (Normal Duty) of the Allen Bradley/Rockwell Automation 25A-D010N114 is 4.


Question: What Phase does the 25A-D010N114 have?

Answer: The Allen Bradley/Rockwell Automation 25A-D010N114 has a Phase of 3.


Question: What Voltage does the Allen Bradley 25A-D010N114 have?

Answer: The 25A-D010N114 has a Voltage of 480 volts alternating current (AC).


Series information for 25A-D010N114

For additional information about 25A-D010N114 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 25A-D010N114.

Revision Part # Also Known As Availability
25A-D010N114/A 25A-D010N114 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 25A-D010N1I4
  • 25A-D010NI14
  • 25A-D010NII4
  • 25A-D01ON114
  • 25A-D01ON1I4
  • 25A-D01ONI14
  • 25A-D01ONII4
  • 25A-D0I0N114
  • 25A-D0I0N1I4
  • 25A-D0I0NI14
  • 25A-D0I0NII4
  • 25A-D0ION114
  • 25A-D0ION1I4
  • 25A-D0IONI14
  • 25A-D0IONII4
  • 25A-DO10N114
  • 25A-DO10N1I4
  • 25A-DO10NI14
  • 25A-DO10NII4
  • 25A-DO1ON114
  • 25A-DO1ON1I4
  • 25A-DO1ONI14
  • 25A-DO1ONII4
  • 25A-DOI0N114
  • 25A-DOI0N1I4
  • 25A-DOI0NI14
  • 25A-DOI0NII4
  • 25A-DOION114
  • 25A-DOION1I4
  • 25A-DOIONI14
  • 25A-DOIONII4
  • 2SA-D010N114
  • 2SA-D010N1I4
  • 2SA-D010NI14
  • 2SA-D010NII4
  • 2SA-D01ON114
  • 2SA-D01ON1I4
  • 2SA-D01ONI14
  • 2SA-D01ONII4
  • 2SA-D0I0N114
  • 2SA-D0I0N1I4
  • 2SA-D0I0NI14
  • 2SA-D0I0NII4
  • 2SA-D0ION114
  • 2SA-D0ION1I4
  • 2SA-D0IONI14
  • 2SA-D0IONII4
  • 2SA-DO10N114
  • 2SA-DO10N1I4
  • 2SA-DO10NI14
  • 2SA-DO10NII4
  • 2SA-DO1ON114
  • 2SA-DO1ON1I4
  • 2SA-DO1ONI14
  • 2SA-DO1ONII4
  • 2SA-DOI0N114
  • 2SA-DOI0N1I4
  • 2SA-DOI0NI14
  • 2SA-DOI0NII4
  • 2SA-DOION114
  • 2SA-DOION1I4
  • 2SA-DOIONI14
  • 2SA-DOIONII4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP